Micrometers - Page 34

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 104-171

Flatness: 0.6 micrometer.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 118-102

The Mitutoyo 118 series sheet metal micrometer has a deep-throated frame for measuring thickness of sheet metal, paper, plastic, or rubber parts, and a vernier scale in metric units for taking precise outside diameter (OD) measurements. A ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, depending on the model, with a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-248-011-1

The Fowler 52-248 series outside micrometer has a flat anvil/spindle pair with a choice of measuring range and 0.01mm graduations for general purpose measuring. The Vernier scale has 0.01mm graduations and an accuracy of 0.001mm for precise readings and accurate measurements. The anvil/spindle pair has a 6.5mm diameter, 0.00076mm flatness, and 0.000125mm parallelism on the 0 to 25mm micrometer for accurate measurements. Hardened, ground, and micro-lapped measuring faces provide wear resistance. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. Friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare providing durability and long life, and microfine graduations help ensure accurate readings. The baked-enamel frame provides durability and long life. The micrometer includes a wrench and a fitted case. Micrometers 50mm and above include a standard. SpecificationsDisplay type Vernier scale Anvil/spindle style Flat Measuring range Varies Graduation interval 0.01mm Accuracy 0.001mm for 0 to 25mm micrometers Thimble style Friction or ratchet Anvil/spindle diameter 6.5mm Flatness 0.00076mm Parallelism 0.000125mmMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. ...

Manufacturer: Fowler Brand: Fowler

Fowler XT RING .160 54-332-005-0

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 111-119

The Mitutoyo 111 series spline micrometer has a small-diameter anvil and spindle for measuring splined shafts, slots, and keyways, and a vernier scale in metric units for taking precise outside diameter (OD) measurements. It also has a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm with a satin chrome rust- and glare-resistant finish. The spindle and anvil are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: INSIZE Brand: INSIZE Model: 3206-61

Outside micrometer with interchangeable anvils, 2-6", graduation 0001".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-186

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: INSIZE Brand: INSIZE Model: 3222-20

Tubular inside micrometer, 2-20", graduation 001".

Manufacturer: Starrett Brand: Starrett Model: 363RL

The Starrett 363 series digital micrometer head has a mechanical digit counter in inch units for ease of reading to 0.001”, and a knurled ring-type lock nut to hold measurements in place. The micrometer is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The micrometer has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4200-0362

HHIP electronic screw thread micrometer features non-rotation spindle 60 degree V-shaped and knife-edged anvils with cable for RS232 output. Ratchet stop. With fitted case. Direct RS232 output. Product specifications: range: 1-2"; anvils: #2-6.