|
|
-
3.5 of 5.0 with 41 Reviews
SALE PRICE: $86.16 1% OFF
Manufacturer: Toolconnection
Brand: Tool connection
Manufacturer: Toolconnection
Brand: Tool connection
A precision tool for finding the Top Dead Centre on diesel engines. 41mm diameter x 0-8mm x 0.01mm
-
3.5 of 5.0 with 43 Reviews
SALE PRICE: $88.00 26% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 2315-05
Manufacturer: INSIZE
Brand: INSIZE
Model: 2315-05
Precision dial indicator, 05 inch graduation 0001 inch.
-
3.5 of 5.0 with 15 Reviews
SALE PRICE: $92.20 57% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 25-881J-8
Manufacturer: Starrett
Brand: Starrett
Model: 25-881J-8
The Starrett 25 Series Dial Indicator has a shockless, hardened steel gear train and jewel bearings, except where noted. It is furnished with a lug-on-center back. AntiÂÂmagnetic mechanism is optional for all models. Special non-shock mechanism is available for all models except 25-109, 25-209 and 25-116.
-
3.5 of 5.0 with 10 Reviews
SALE PRICE: $108.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1411SB
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1411SB
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
3.5 of 5.0 with 4 Reviews
SALE PRICE: $109.99 15% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-562-001-0
Color: White
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-562-001-0
Color: White
The Fowler 52-562-001-0 Horizontal White Dial X-Test Indicator features jeweled movement , revolution counter, automatic reversal and 1.5" diameter. 0.060" range, twice the range of most indicators. 2 dovetail mounting locations and includes 2 dovetail clamps (3/8" + 5/32"). Adjustable bezel for easy zeroing. 0.080" and 0.120" carbide points, 0.040" steel points. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.
-
3.5 of 5.0 with 50 Reviews
SALE PRICE: $110.00 24% OFF
Manufacturer: Tools & Outdoor Gear
Brand: General Tools & Instruments
Manufacturer: Tools & Outdoor Gear
Brand: General Tools & Instruments
General's Plunger Dial Indicator offers a myriad of uses in your machine shop, from setting up milling machines and lathes to checking the accuracy of a work piece. The highly sensitive plunger detects small imperfections in your stock or machine with accuracy to .001 inch. The 2-1/2 inch diameter face can be rotated for setting at any point, and includes adjustable limit indicators for marking important readings. There is also a lug mount on the back of the Dial for mounting to a magnetic base.
-
3.5 of 5.0 with 5 Reviews
SALE PRICE: $111.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1781SB
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1781SB
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
3.5 of 5.0 with 2 Reviews
SALE PRICE: $119.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2416S-06
Color: Black
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2416S-06
Color: Black
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
-
3.5 of 5.0 with 22 Reviews
SALE PRICE: $119.99 1% OFF
Manufacturer: Craftsman
Brand: Craftsman Back Plunger Type Dial Indicator Set, PA
Manufacturer: Craftsman
Brand: Craftsman Back Plunger Type Dial Indicator Set, PA
Craftsman Back Plunger Type Dial Indicator Set, PART #9HT3668
-
3.5 of 5.0 with 47 Reviews
SALE PRICE: $120.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2922S
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2922S
Color: White
|
The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...
|
|