|
|
-
3.0 of 5.0 with 2 Reviews
SALE PRICE: $159.99
Manufacturer: Cropmeters.com
Brand: Cropmeters.com
Model: FP003
Manufacturer: Cropmeters.com
Brand: Cropmeters.com
Model: FP003
|
This stainless steel fruit firmness tester has a dual range that allows you to measures general fruit firmness with a range of 0.5-12kg/cm2. with the thinner 8mm tip which is ideal for Apples, Peaches, Pears, Avocado, Kiwi, Tomatoes. You can also change the measurement range by swapping tips to the thicker 11mm diameter tip and using the penetrometers dual display to a measurement range of to 1-24kg/cm2 for tougher fruits. Using the penetrometers dual dial display it makes it easy to measure the firmness of nearly all fruits.
Fruit firmness is considered one of the most accurate ways to test for a fruit maturity and quality. By measuring a fruits firmness you can make decisions about when to harvest, which fruits seeds to breed, can make decisions on which fruits to export or transport and for example which fruits should be processed and which fruits should be sold fresh. Directions for use.1. Turn the trailing dial to zero. 2. Use a potato peeler or a knife to remove the skin layer of the fruit. 3. Position the penetrometer perpendicular to the fruit. 4.Slowly and steadily press the sensor until it penetrates the pulp of the fruit. 5. Once the tip has penetrated the fruit pulp, read the value of the trailing dial.
-
2.3 of 5.0 with 3 Reviews
SALE PRICE: $29.99 9% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-520-109-0
Color: Black
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-520-109-0
Color: Black
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
2.3 of 5.0 with 3 Reviews
SALE PRICE: $40.82 22% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-520-110-0
Color: White
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-520-110-0
Color: White
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $22.02 1% OFF
Manufacturer: HHIP
Brand: Pro Series by HHIP
Model: 4400-1101
Manufacturer: HHIP
Brand: Pro Series by HHIP
Model: 4400-1101
Pro-Series 0-10mm Metric Dial Indicator .01mm Graduation Reading: 0-100 Rack & contact point made of hardened stainless steel. Jewel LED movement. 2" diameter dial face. Stem: 8mm Lug back.
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $39.24 1% OFF
Manufacturer: HHIP
Brand: Pro Series by HHIP
Model: 4400-1110
Manufacturer: HHIP
Brand: Pro Series by HHIP
Model: 4400-1110
Pro-Series 0-5mm Metric Dial Indicator .01mm Graduation Reading: 0-100 Rack & contact point made of hardened stainless steel. Jewel LED movement. 2" diameter dial face. Stem: 8mm Lug back.
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $48.30 1% OFF
Manufacturer: HHIP
Brand: Pro Series by HHIP
Model: 4400-0019
Manufacturer: HHIP
Brand: Pro Series by HHIP
Model: 4400-0019
Pro-Series 0-20mm Metric Dial Indicator .01mm Graduation Reading: 0-100 Rack & contact point made of hardened stainless steel. Jewel LED movement. 2" diameter dial face. Stem: 8mm Lug back.
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $62.10
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-520-747-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-520-747-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $121.48 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2909S-62
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2909S-62
Color: White
|
The Mitutoyo dial indicator has a white face, one-revolution, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. It has a one-revolution display that shows the entire spindle range in fractional inches to enhance readability. A rotating bezel sets the indicator to zero at any spindle location, and moveable limit markers can be set to indicate tolerance levels. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, dustproof, shockproof, and a white face.Dial indicators are al...
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $121.92 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2909SB-62
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2909SB-62
Color: White
|
The Mitutoyo dial indicator has a white face, one-revolution, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. It has a one-revolution display that shows the entire spindle range in fractional inches to enhance readability. A rotating bezel sets the indicator to zero at any spindle location, and moveable limit markers can be set to indicate tolerance levels. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, dustproof, shockproof, and a white face.Dial indicators are al...
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $122.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1909S-62
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1909S-62
Color: White
|
The Mitutoyo dial indicator has a white face, one-revolution, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. It has a one-revolution display that shows the entire spindle range in fractional inches to enhance readability. A rotating bezel sets the indicator to zero at any spindle location, and moveable limit markers can be set to indicate tolerance levels. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, dustproof, shockproof, and a white face.Dial indicators are al...
|
|