Vernier Calipers - Page 5

Manufacturer: Wotefusi Brand: Wotefusi

Description: 6" 150mm Electronic Digital Vernier Caliper Specifications Range: 0mm to 150mm/ 0inch to 6inch Resolution: 0.02mm Package Including: 1x Digital Caliper(no battery)

Manufacturer: Clockwise Tools Inc. Brand: Clockwise Tools Model: DCLR-0605 Color: White, Grey, Purple

Clockwise Tools DCLR-0605 Digital Caliper is a higher quality and lower price digital caliper. It is highly recomended for home DIY using as well as professional using. The measuring Range is 0-6 inch/150mm. Its accuracy is ±0.001"/0.02mm and Repeatability is 0.0005"/0.01mm. The resolution is 0.0005"/0.01mm, 1/128". The max Measuring Speed that allowed is 120" per second. It has a super large LCD screen (20mm x 50mm) in Inch/Metric/Fractions conversion. It also has a RS232 Data Output. Using connection cable (not included) allows data transfer between digital caliper and PC. Clockwise Tools DCLR-0605 comes with two 3V, CR2032 Lithium batteries. Please NOTE that IN ORDER TO OBTAIN A MORE ACCURATE MEASURING RESULT, PLEASE USE A SMALL PIECE OF PAPER OR PAPER CARD TO CLEAN THE EXTERNAL JAWS EVERYTIME BEFORE USING! Clockwise Tools DCLR-0605 DIGITAL CALIPER HAS AUTO-OFF FUNCTION AND IT TAKES 5-7 MINS TO SHUT OFF. Clockwise Tools DCLR-0605 HAS 1 YEAR WARRANTY. For more information please follow us on Instagram @officialclockwisetoolsinc.

Manufacturer: KEWAY Brand: KEWAYO

When you require accurate measurement, you need a caliper. But an accurate measurement is meaningless if you can't read it accurately. This KEWAYO caliper is an essential measuring tool with an extra-large LCD digital readout for exact internal and outside measurements accurate to .001-Inch. Instantly converts from Inch or Metric, the display can be zeroed at any point on the slide. Machine-grooved thumb-roll mechanism and position lock for sure adjustment. Hardened stainless steel shaft with depth-measurement probe, precision ground jaws. On-off switch with auto-off, one long-life batteries included.Features:★ Highly polished surface, Hardened stainless measuring surfaces and around LCD Display★ Slide is smooth, no grittiness★ Highly integrated circuit chip, Display is clear and stable★ Heavyweight, Rugged design ★ Ergonomic thumb adjustment with textured grip ★ Lock screw to hold the slide in position ★ Zero at any position ★ Extra easy-to-read LCD, 0.44" high characters ★ Auto On ★ Automatic shut-off after 5 minutes of non use ★ Integrated depth rod ★ Precision Fit Slide for Smooth and Accurate Sliding Action ★ Low battery warning by flashing display ★ Data Output: Serial output for interface with host computer or printer Specification: 1. Measuring Range: 0-150mm / 0-6 inch 2. Resolution: 0.01mm / 0.0005 inch 3. Accuracy: 0.03mm / 0.001 inch 4. Operating temperature: 0℃～+40℃ 5. Storage temperature: -20℃～+70℃ 6. Influence of humidity: Not imporant within 0 to 80% of relative humidity 7. Power source: LR44 Button cell (Alkaline Battery) Package includes: 1 x Digital Caliper 2 x Alkaline LR44 Button Batteries (1 Built-in battery and 1 Complimentary battery) 1 x Screwdriver 1 x Plastic Packing Box

Manufacturer: GlowGeek Brand: GlowGeek Model: DKC-8050 Color: Orange/Black

GlowGeek Premium Precision Professional Grade Tool Super high quality measuring device. Easy read with the largest LCD display available. No other caliper offer you 4 digits decimal in SAE mode or 1/128" fractional display. *Digital Caliper made entirely of stainless steel. Can measure in 3 ways - inch/metric/fraction *Offers extreme accuracy and can be reset at any time. The numbers displayed on the LCD screen are clear, large and easy to read. *Has a number of measuring options .Can be used to measure length, depth, external and internal scope. Easy and comfortable to operate and made from premium quality stainless steel. *Has a strong and long life battery. *Includes helpful and easy to read operating instructions.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 530-104

The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. A depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specifications GGG-C-111B. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 530-118

The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. A depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specifications GGG-C-111B. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel ...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Inspection report with a declaration of conformity

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-085-024-0

The Fowler Full Warranty 52-085-024-0 master inch/metric vernier caliper measures in inches and metric, has a 0.001"/0.02mm graduation, and two-way jaws for measuring the inside diameter (ID) and outside diameter (OD) of holes, and grooves. Long jaws provide access to hard-to-reach areas and improved accuracy over longer measuring ranges. The open-face design allows both vernier scales to be located on one side of the gauge for both inch and metric measurements. A fine-adjustment screw ensures accurate measurements, and a locking screw secures the measurement tightly in place for accurate readings. An extra-long vernier ensures accuracy. Sharp black graduations and wide-spaced microfine graduations on a satin-finished beam allow ease of reading. Raised sliding surfaces prevent wear of graduations for accuracy and long life. Verniers can be adjusted as wear occurs over time, and ground and lapped measuring faces ensure accuracy and wear resistance. Hardened stainless steel construction provides durability and wear resistance. The caliper includes a fitted case. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.Vernier calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The main scale is engraved directly on the beam while the vernier scale is engraved on the slider mechanism. The base measurement is taken from the long beam, which provides the initial whole measurement in inches, centimeters, or millimeters. To obtain the total measurement, the base reading is added to the vernier scale reading, which provides fractional measurements in inches or millimeters. A locking mechanism provides the ability to take dif...

Manufacturer: Bihood Brand: Bihood Color: Orange

✔ A must have for enjoyable life: Resolution: 0.01 mm ( 0.0005 in ). Used for industrial work, jewelry, gunsmithing, etc Easy to use, easy to carry and easy to clean. 4 way measurements: inside, outside, step and depth from 0 mm to 80 mm ( 0 in to 3.15 in ). ✔ Specification: Dimension - 11 cm x 4.6 cm ( 4.33 in x 1.81 in ) Weight - 36 g ( 1.27 oz ) ✔ Package included: 2 x 80mm Vernier Caliper ✔ For Optimal Use: Avoid being exposed to direct sunlight. Keeping in cool place will make it look like new one even though it has been used for years.

Manufacturer: Luwu-Store Brand: Luwu-Store Color: One Color

Specifications:100% brand new and high quality. Material: solid brassOverall Length: about 9.5cmWidth: about 3cmMeasuring range: 80mmAvailable scale: double scale/ single scalePackage includes:1 x 80mm Vernier measuring tool