Dial Calipers - Page 40

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-560-060-0 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-742-51

Mitutoyo 505-742-51 D6"Tx-1, Caliper, Dial, Blue Face,.1"/Rev, 0-6",.001".

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-030-012-0 Color: Black & Red

The Fowler Dual Reading stainless steel dial caliper has dial graduations of 0.001" and 0.02mm with 0.001" and 0.02mm accuracy, reads in both standard and metric units, has a sliding jaw with a lock, and a covered rack. The knurled lock screw holds the sliding jaw in position and helps ensure a consistent measurement. A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step.The caliper measures 0.10" and 2mm per revolution of the dial. The white dial has 0.001" graduations in black and 0.02mm graduations in red, and the beam has engraved 0.10" and 1mm graduations. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion. An adjustable dial enables setting zero. Spring anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case.Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outside, and step measurements in standard or metric units. An additional de...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-743

Caliper, Dial, .1"/Rev, 0-8", .001".

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-174-212-1

The Fowler electronic chrome-plated twin-beam height gauge has a measurement range of 0 to 24" (600mm), a high-contrast LCD readout precise to 0.001" (0.01mm), an accuracy of + or – 0.002", a hand-operated slider, a carbide-tipped scriber, and a rust-resistant satin chrome finish. A calibrated screw mechanism supports coarse and fine, uniform slider adjustments. A large, hand-operated feed wheel raises and lowers the gauge on the beams with smooth, even travel, and is selectable for coarse or fine feed. The gauge has a hold function to freeze recordings on the display, and a zero setting function. Relative and absolute measuring functions allow measurements of the true size or comparison measurements of parts to a master. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and durability. The gauge is powered by one SR44 1.55V silver oxide battery (sold separately) that provides up to one year of normal use. The display flashes to indicate when battery replacement is needed. The gauge has a working environment temperature of 32 to 104 degrees F (0 to 40 degrees C) with a surrounding relative humidity of 80 percent. Storage and transport temperature is -4 to 158 degrees F (-20 to 70 degrees C). The satin chrome finish on the scales resists rust and is glare-free. The base is hardened, ground, and lapped for maximum flatness. The scriber on this height gauge can be removed and replaced with the included indicator holder, which accepts a 3/8" indicator stem or a dovetail to attach instruments such as a test indicator to measure squareness. The height gauge also comes with a molded case.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from ...

Manufacturer: HHIP Brand: Pro Series by HHIP Model: 4400-1102

Pro-Series AGD Group 2 Type 0-1" Black Face Dial Indicator Contact point interchangeable with thread 4-48. Rack & contact point made of hardened stainless steel. Jewel LED movement. Stem: 3/8" diameter. 2" diameter dial face. Graduation: 0.001" Reading: 0-100 Lug back.

Manufacturer: Oshlun Brand: Oshlun Model: MTDCF-06

Our 6-Inch fractional dial caliper is made of stainless steel and comes in a plastic storage case. It features a 1-1/2-Inch dial that is easy to read when taking outside, inside, depth and step measurements. The dial face or bezel can be rotated to set zero anywhere on the scale and has a bezel clamp to lock the dial in place for making deviation measurements. The range per revolution is 1-Inch, with an accuracy of +/- 0.001-Inch, graduated in 0.010-Inch on the inner ring and 1/64-Inch on the outer ring. Also features a knurled thumb roller, positive lock and precision ground jaws.

Manufacturer: Generic

Manufacturer: Moore and Wright Brand: Moore & Wright Model: MW1966M50

Supplied complete with durable plastic case 25mm Setting gage supplied Moore and Wright History -Founded in 1906 by innovative young engineer Frank Moore, Moore & Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineers tools.

Manufacturer: Branded Brand: Unknown Color: Multi

Our Plastic Dial Calipers offer Precision Measurements At Affordable Prices; Making Them A Great Choice For Hobbyists And Do-it-yourselfers. This Metric-reading Caliper Features A No-glare Dial For Accurate Readings of Inside; Outside; Depth And Step Measurements Up To 0.1mm. The Slide Is Easily Advanced And Retracted With A Free-wheeling Thumb Roller; And The 6 Bar Scale Is Marked With 1/16" And 10mm Graduations."