Calipers - Page 171

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-742-51

Mitutoyo 505-742-51 D6"Tx-1, Caliper, Dial, Blue Face,.1"/Rev, 0-6",.001".

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-030-012-0 Color: Black & Red

The Fowler Dual Reading stainless steel dial caliper has dial graduations of 0.001" and 0.02mm with 0.001" and 0.02mm accuracy, reads in both standard and metric units, has a sliding jaw with a lock, and a covered rack. The knurled lock screw holds the sliding jaw in position and helps ensure a consistent measurement. A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step.The caliper measures 0.10" and 2mm per revolution of the dial. The white dial has 0.001" graduations in black and 0.02mm graduations in red, and the beam has engraved 0.10" and 1mm graduations. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion. An adjustable dial enables setting zero. Spring anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case.Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outside, and step measurements in standard or metric units. An additional de...

Manufacturer: Carrera Precision Brand: Carrera Precision Model: CP5924

Features »Extra Large easy to read digital LCD screen.. »Accurate to 1/1000th of an inch. »Four methods of measurement: Inside, outside, depth and step from 0'' to 12''. »Metric conversion & zero buttons. »Standard Strong stainless steel frame. »Stepped end depth rod for measuring small holes up to 12'' deep. »Thumb wheel allows for easy, one-handed adjustment. »Screw lock can lock the caliper at a set dimension for multiple measurements. »Zero button lets you zero the measurement at any position. Great for measuring tolerances in the positive and negative.Specifications »Resolution 1/64" - 0.0005"/ 0.01mm.. »LCD Display. »Max Measuring Speed: 1.5 m/sec., 60 in/sec. »Measuring System: Linear Capacitive Measuring System. »Measuring Range: 0-304 mm/0-24 in. »Resolution: 0.01mm/0.0005in.What's In The Box? »Carrera Precision Standard 24-Inch Digital Caliper»Extra Battery»Custom Fitted Storage CaseWarranty »30 Day Satisfaction Guarantee.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-743

Caliper, Dial, .1"/Rev, 0-8", .001".

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe 00591007 3-Piece Digital Electronic Precision Tool Set with Shop-Cal Caliper is supplied with the 599-100 0-1.2” Micromaster “Easy” Micrometer and the 00590090 0-6” Shop-Cal Caliper. The micrometer features .0001” accuracy on outer diameter (OD) measurements, and the caliper features .001” accuracy on outer diameter (OD) measurements, and .0015” on inner diameter (ID) measurements. Specifications for this absolute and differential measuring system are consistent with DIN 862. It also features a large, 1/4” display for readability, auto shut-off, and instant inch/metric conversion. The set comes in a plastic molded case. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Micrometers are used widely for precise measurement of small distances. Duo tool sets that utilize calipers and micrometers are commonly used in mechanical engineering and machining, as well as most mechanical trades, to accurately measure parts. Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI. What's in the Box? 00591007 Three-Piece Digital Electronic Precision Tool Set Molded, plastic case

Manufacturer: Fowler Brand: Fowler

Includes 6" Dial Caliper 52-008-007 - .001" graduations Micrometer 52-229-201 - .0001" graduations, Range: 0-1" 6" Flexible rule with 32nds, 64ths, 10ths & 100ths graduations All contained in a fitted, shop-hardened case

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-004-330-0

The Fowler 54-004-330 Xtra-Value Depth Gauge and Euro-Cal IV Measuring Set includes two depth gauges: the Euro-Cal IV Electronic Caliper (54-100-330-1) and the Xtra-Value Depth Gauge (54-225-555). The Euro-Cal IV Electronic Caliper has a measurement range of 0 to 6" (0 to 150mm), and a resolution (or smallest graduation interval) of 0.0005" (0.01mm), with + or – 0.001" (or .02mm) of accuracy, and the Xtra-Value Depth Gauge has a measurement range of 0 to 6" (0 to 150mm), and a resolution of 0.0005" (0.01mm), with + or - 0.001" (0.025mm) of accuracy. The LCD screen for both gauges display in U.S./metric, and fractions (in 1/64" increments). The Euro-Cal IV Electronic Caliper is made of stainless steel and is water resistant to Ingress Protection 54 (IP54) standards. The Xtra-Value gauge includes six measuring rods and has a spring-loaded measurement button with a hold function for ease of use and accurate measurements. The gauges conform to Federal Accuracy specifications. The shipping weight of the set is 1.4 lb. and it comes with a hardened case. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.What's in the Box?Fowler 54-100-330-1 depth gaugeFowler 54-225-555 depth gauge(6) Measuring rods for 54-225-555Hardened...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-611-0

The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008"/0.02mm accuracy and.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. This caliper can output data via direct RS-232 for capturing and recording data. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thick...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-622-0

The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008"/0.02mm accuracy and.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. This caliper can output data via direct RS-232 for capturing and recording data. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thick...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-624-0

The Fowler Internal Electronic Caliper Gage measures inside dimensions (ID) with 0.0008"/0.02mm accuracy and.0005"/0.01mm resolution, and has a digital, single-value readout LCD, absolute and incremental modes, and RS-232 output. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. The unit offers absolute and incremental modes for taking intermediate or differential measurements and stores a preset reference for comparing measurements. The caliper is spring-loaded in the measuring direction for a consistent measuring force and improved measurement repeatability. A thumb lever retracts the movable point. This caliper can output data via direct RS-232 for capturing and recording data. The caliper has a 2"/5cm diameter plastic electronic housing, steel arms, and hardened steel contact point for durability. The caliper uses a 3V CR2032 battery (included). It also comes with an aluminum case with foam inserts to cushion the instrument. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Caliper gages are used in production settings where specific diametrical or thick...