Current Testers - Page 107

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-71X

Hose kit is compatible with the 717 and 718 calibrators 100 PSI and below. Translucent accessory hoses allow the technician to easily identify if there is oil or other contaminants in the hose before they get into your calibrator. The kit contains three translucent hoses one meter long, easy to connect push fit connectors for both connect ion to the calibrator and the device under test. One 1/8" to 1/4" NPT female to female adapter.

Manufacturer: Hioki Brand: Hioki Model: 3291-50

AC Flip Clamp TRMS Equipped with an innovative display that flips down for easy visibility, the 3291-50 and 3293-50 are designed for efficient measurement of indoor wiring in a variety of environments, from factories, buildings, and offices to residences. The convenience of being able to safely measure currents without the need to disconnect power lines has made clamp on current meters the required equipment for the technicians who are responsible for maintaining and inspecting new and existing electrical equipment at locations such as factories and offices. Market research indicates that most of the clamp sensor damage and other problems that these instruments frequently experience is caused by excessive twisting in confined spaces, particularly when technicians must forcefully rotate the tool in an effort to see the display during measurement. The CLAMP ON HiTESTER 3291 and CLAMP ON LEAK HiTESTER 3293 address these issues with newly developed low-profile sensors and a movable display, ensuring unmatched ease of use in the field. The new models meet technicians' demands for easy operability in on-site measuring applications with exceptional portability and full-featured measurement functionality. Advantages: * Compact, low-profile sensors - The 3291 measures conductors up to 30 mm in diameter with a low-profile sensor core that's just 8 mm thick. It can be clamped in place to measure circuit breakers and other conductors as long as there is at least 12.5 mm of space available between wires. The 3293 measures conductors up to 24 mm in diameter with a low-profile sensor core that's just 11 mm thick. The core's concentric design acts to reduce the influence of magnetic fields from nearby power lines, even when measuring leak currents. * Flip-down display - The ability to rotate the display through 180? keeps readings visible regardless of the configuration of the wiring being measured and its location above or below the user

Manufacturer: TPI Brand: TPI Model: 275

275 Clamp-On Tester with True RMS Digital Multimeter and 11,000 Count Display The TPI 275 digital clamp meter is a true RMS sensing, manual- and auto-ranging multimeter for measuring current, voltage, resistance, capacitance, and frequency in electrical testing applications. It has a clamp that measures AC and DC current to 400 amp. The clamp has two jaws that can close around an electrical conductor up to 35mm (1.37") in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring DC current to 1,100 microamperes, AC and DC voltage to 600V, resistance to 110 megohms, voltage frequency to 110mHz (megahertz), and capacitance to 110,000 microfarads. The meter comes with a K-type thermocouple probe for measuring temperature to 1,000 degrees F. Its relative function allows a measurement to be set as a reference value, and it displays the subsequent measurements as positive or negative deviations from that value. The peak hold function records the maximum measurement of a current surge. The maximum/minimum function records the highest and lowest readings in a session to track a sudden increase or decrease in readings. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. An audible continuity sensor confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. The meter's inrush current function analyzes the surge current at the startup of motors and other inductive loads to provide accurate, stable measurements. A non-contact voltage detector senses voltage without making contact with the circuit. The meter has a rotary switch to select the property to measure, and an 11,000-count LCD that shows readings numerically and in a 41-segment bar graph

Manufacturer: Amprobe Brand: Amprobe Model: 45951EL-AMZN

The amprobe acd-10 Plus Digital clamp meter is an average-sensing, auto-ranging Multimeter for measuring current, Voltage, capacitance, resistance, and frequency in electrical testing applications. It has a transformer clamp that measures alternating current (AC) to 600 amp and frequency to 100 kilohertz (kHz), and it comes with detachable Test leads that measure direct current (DC) Voltage and AC Voltage to 600 volts (V), capacitance to 3,000 microfarads, resistance to 40 megaohms, and frequency to 100 kHz. The clamp has two 0.4" (10 mm) thick jaws that are slimmer than standard clamp jaws for improved access to tight areas. The jaws can close around electrical conductors up to 1" (26 mm) in diameter to measure current without touching or Interrupting the circuit. A relative zero mode stores a reading in Memory to use as a zero point for subsequent readings, allowing for quick Comparison of multiple readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and a diode Test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced.

Manufacturer: Smiths Connectors / IDI Brand: Smiths Connectors / IDI

Contact Probes HEADED 90 DEG CONVEX

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: CA3018

The CA3018 is a 3000A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA3018 is an 18 inch flexible clamp capable of measuring AC Currents up to 3000A. Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs and two AAA batteries. UL listed with a CAT IV 600V safety rating.

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 8122

Kyoritsu 8122 AC load current clamp sensor. Conductor size: 40mm. Rated current: 500A AC. Output voltage: AC 500mV/500A (AC 5mV/A). Accuracy: +/-2.0 percent rdg +/-0.3mV (50/60Hz), +/-3.0 percent rdg +/-0.5mV (40Hz-1kHz). Withstand voltage: AC 5350V for 5 seconds. Cable length: approximate 2m. Output connector: Mini-DIN 6-pin. Operating temperature ranges: 0-40 degree C, less than 85 percent RH (without condensation). Output impedance: approximate 9.5 ohms. Applicable standards: IEC 61010-1:2001, IEC 61010-2-032:2002, CAT III 600V pollution degree 2. Accessories: 9095 (portable case), instruction manual, cable marker. Measures 128-mm length by 81-mm width by 36-mm depth.

Manufacturer: Tektronix Brand: Tektronix

Test Leads LEAD,ELECTRICAL, 6 INCH (PROBE GND)

Manufacturer: Mueller Electric Brand: Mueller Electric

Test Leads Black Micro-Plgr Cli

Manufacturer: Klein Brand: Klein Tools Model: CL2000 Color: Graphite Gray & Orange

400A AC/DC True RMS Clamp MeterProduct FeaturesTrue RMSBacklit display and worklightMagnetic mount and lead storageNon-Contact Voltage TesterAnalog bar graphMeasures DC CurrentSpecificationsHeight: 8.875" (225mm)Width: 3.375" (86mm)Weight (oz.): 10.7oz (303.34g)Batteries: 2 x AAAJaw Size: 1.25" (32mm)Included Accessories: test leads, batteries, case Safety Rating: CAT III 600V