Current Testers - Page 124

Manufacturer: STANDARD INSTRUMENTS CO LTD Brand: Reed Instruments Model: R5030-NIST

This compact autoranging True RMS clamp meter is capable of measuring AC/DC current (50, 500A) and voltage (AC: 500mV, 5, 50, 500, 750V/ DC: 500mV, 5, 50, 500, 1000V ), resistance (500Ω, 5, 50, 500kΩ, 5, 50MΩ), frequency, capacitance (500, 5000nF, 50, 500µF, 5mF), duty cycle and temperature (-148 to 1832°F (-100 to 1000°C)). Featuring a 50,000 count backlit LCD display, double molded plastic housing, the R5030 includes diode check and continuity functions and a non-contact voltage detector built into the clamp tip. This product includes a calibration certficate traceable to NIST (National Institute of Standards and Technology).

Manufacturer: Fluke Brand: Fluke

The Fluke i17XX-FLEX1500 12 inch iFlex flexible current probes measure to 1500A AC while providing the ultimate measurement flexibility. The iFlex probes connect directly to the 173X Energy or Power Logger, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the energy logger making it easier to view the display.

Manufacturer: Fluke Corporation Brand: Fluke Model: 85RF II

The 85RF high frequency probe is designed to convert a DC voltmeter with a input impedance of 10M ohms into a high frequency (100kHz to 500 MHz) RF voltmeter. Conversion from AC to DC is accomplished on a one-to-one basis includes a range of 0.25 to 30V rms. The probe's DC output is calibrated to be equivalent to the rms value of a sine wave input. 0.25 to 30V rms voltage range. 30V RMS, 200V DC maximum input voltage. 1:1 AC to DC ratio. Ratio accuracy (at 25 MHz and loaded with 10 M ohm) Above 0.5V: +/- 0.5 dB. Below 0.5V: +/- 1.0 dB. Add +/- 0.2 dB in RF fields of 1 to 3 V/m. Frequency response (relative to 25 MHz): 100KHz to 100 MHz +/- 0.5 dB. 100 MHz to 200 MHz +/- 2.0 dB. 200 MHz to 500 MHz +/- 3.0 dB.

Manufacturer: Fluke Corporation Brand: Fluke Model: 85RF II

The 85RF high frequency probe is designed to convert a DC voltmeter with a input impedance of 10M ohms into a high frequency (100kHz to 500 MHz) RF voltmeter. Conversion from AC to DC is accomplished on a one-to-one basis includes a range of 0.25 to 30V rms. The probe's DC output is calibrated to be equivalent to the rms value of a sine wave input. 0.25 to 30V rms voltage range. 30V RMS, 200V DC maximum input voltage. 1:1 AC to DC ratio. Ratio accuracy (at 25 MHz and loaded with 10 M ohm) Above 0.5V: +/- 0.5 dB. Below 0.5V: +/- 1.0 dB. Add +/- 0.2 dB in RF fields of 1 to 3 V/m. Frequency response (relative to 25 MHz): 100KHz to 100 MHz +/- 0.5 dB. 100 MHz to 200 MHz +/- 2.0 dB. 200 MHz to 500 MHz +/- 3.0 dB.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530862

Fluke sensor magnet mount for handheld vibration tester.

Manufacturer: Extech Instruments Brand: Extech Model: EX820-NISTL

AC Clamp-on millimeter with built-in non-contact Infrared Thermometer. Provides measurement of AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, Continuity and Type K Temperature. This product has a limited NIST Certification.

Manufacturer: Amprobe Brand: Amprobe Model: ACDC-52NAV

Troubleshoot electrical systems easily and accurately.View larger Check power quality to quickly determine the efficiency of electrical systems. Advanced Features for Complete Troubleshooting of Electrical Systems The ACDC-52NAV Navigator Clamp Meter serves as a first line of defense for electrical system monitoring and troubleshooting. From daily voltage current checks to sophisticated system verification for power and harmonics, this tool can be used to properly diagnose the entire electrical system. By identifying the specific problem, technicians can take action or more easily escalate the issue to specialized teams. The ACDC-52NAV is packed with advanced features to aid troubleshooting including power and power factor, total harmonic distortion and individual harmonics, inrush current, low pass filter and phase sequence. The unique Navigator joy stick control allows quick selection of the numerous measurement features on the large LCD display. Simply highlight the desired measurement feature using the joy stick and press to select. Built for rugged industrial environments, this CAT IV 600V/CAT III 1000V clamp meter also features super bright backlight display, built-in jaw flashlight and an over molded housing to absorb shocks. Full Range of Advanced Features The ACDC-52NAV measures AC/DC current up to 600A, AC/DC voltage to 1,000V, capacitance, resistance, and frequency. Its bright LCD screen with backlight is perfect for operation in dark environments and direct sunlight. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. Low pass filter enables reading voltage, current and frequency measurements on variable frequency drives (VFDs). Power factor and active power readings provide data on the power usage and efficiency of electrical systems. This meter measures total harmonic distortion (THD) and individual harmonics up to the 25th harmonic. The total harmonic distortion reading (0 to 100%) identifies whether you have a harmonics issue - the higher the THD ...

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: MA140-NIST

The MA140-NIST is a Compact AC Clamp Meter with NCV Detector. This Clamp meter takes True RMS measurements for accurate readings of noisy, distorted or non-sinusoidal waveforms. The MA140 can measure up to 300A AC. Complete with carrying case, two LR44 batteries and certificate traceable to NIST. UL listed with a CAT III 600V safety rating.

Manufacturer: Amprobe Brand: Amprobe Model: ACDC-54NAV

Amprobe ACDC-54NAV 1000A AC/DC Power Quality Clamp Meter Test performance such as verifying system efficiency easily and accurately.View larger Advanced Features for Complete Troubleshooting of Electrical Systems The ACDC-54NAV NavigatorTM Clamp Meter serves as a first line of defense for electrical system monitoring and troubleshooting. From daily voltage current checks to sophisticated system verification for power and harmonics, this tool can be used to properly diagnose the entire electrical system. By identifying the specific problem, technicians can take action or more easily escalate the issue to specialized teams. The ACDC-54NAV is packed with advanced features to aid troubleshooting including power and power factor, total harmonic distortion and individual harmonics, inrush current, low pass filter and phase sequence. The unique NavigatorTM joy stick control allows quick selection of the numerous measurement features on the large LCD display. Simply highlight the desired measurement feature using the joy stick and press to select. Built for rugged industrial environments, this CAT IV 600V/CAT III 1000V clamp meter also features super bright backlight display, built-in jaw flashlight and an over molded housing to absorb shocks. Full Range of Advanced Features The ACDC-54NAV measures AC/DC current up to 1000A, AC/DC voltage to 1,000V, capacitance, resistance, frequency and temperature from -50 °F to 1832 °F (-50 ºC to 1000 ºC). Its bright LCD screen with backlight is perfect for operation in dark environments and direct sunlight. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. Low pass filter enables reading voltage, current and frequency measurements on variable frequency drives (VFDs). Power factor and active power readings provide data on the power usage and efficiency of electrical systems. This meter measures total harmonic distortion (THD) and individual harmonics up to the 25th harmonic. The total harmonic distortion reading (0 to...

Manufacturer: Apem Brand: Apem

Test Plugs & Test Jacks SOCKET