Current Testers - Page 125

Manufacturer: Hioki Brand: Hioki Model: 9660

Clamp on sensor for the power quality analyzer 3169 and 3196. Sensor is designed with a safety barrier to protect the user from being in direct contact with live conductors. Completely meet all CE marking requirements. Rated input current 100 A AC. Rated output current 0.1 V AC. Accuracy (at 45/66 Hz) amplitude: +/-0.5 percent rdg. +/-0.2 percent f.s. Full scale (f.s.) is the 3196 value. Phase: +/-0.5 or less. Frequency characteristics 66 Hz to 5 kHz (+/-1 percent or less from accuracy). Maximum allowable input continuous 130 A rms (45 to 66 Hz). Maximum circuit voltage 300 V AC rms (insulated wire). Core jaw diameter: 37/64". Measures 1-51/64" width by 5-19/64" height by 53/64" depth. Cord length: 9-53/64'.

Manufacturer: Fluke Corporation Brand: Fluke Model: MA190

Kit includes 50 ohm BNC insulated feed through terminator, 50 ohm BNC terminator with 10:1 signal attenuation, 1 ohm current shunt for current measurements, safety-designed BNC cable, 1.5m (5'), insulated BNC (f) to 4mm-banana plug adapter, dual 4mm banana receptacles (1 red, 1 black). The MA190 accessory set enables interconnection of the Fluke ScopeMeter 190 series for use in the field of medical imaging and video systems.

Manufacturer: Fluke Corporation Brand: Fluke Model: 709H/TRACK

Fluke Corporation introduces the Fluke 709H Precision Current Loop Calibrator with HART Communications, an affordable, easy-to-use tool with a user-friendly interface and HART capabilities that reduces the time it takes to measure or source, voltage or current, and power up a loop. With its best-in-class accuracy at 0.01 percent reading, the Fluke 709H is ideal for process technicians who need a precise loop calibrator and powerful HART communicator in one compact, rugged, reliable tool. The Fluke 709H supports a select set of HART universal and common practice commands. In the communicator mode, technicians can read basic device information, perform diagnostic tests, and trim the calibration on most HART-enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with a HART modem. It also features a built-in, selectable 250-ohm resistor to tune the loop for HART communications. The 709H and non-HART 709 models feature an intuitive interface with dedicated buttons, a Quick-Set rotary encoder knob, and simple two wire connection for quick, easy measurements. The dedicated 0-100 percent span and 25 percent step buttons make for quick and easy testing. Ramping and auto-stepping enables technicians to perform tests remotely and be in “two places at once.” The optional 709H/TRACK software with communication cable can document milliamp measurements and HART transmitter parameters and upload to a PC.

Manufacturer: GMW Associates Brand: GMW Associates

The CPCO Series (77mm) DC-AC Current Probes are Clamp On current sensors capable of measuring ac and dc currents available in ranges of +/-500A, +/-1000A, +/-2000 or +/-4000A with an accuracy of +/-1% and non-linearity of

Manufacturer: AEMC Brand: AEMC Model: MR193-BK

Model MR193-BK is a AC current probe. Model MR193-BK is of 1000AAC/1400ADC capacity. For use with models 3945/3945-B, 8220 and 8230.

Manufacturer: Hioki Brand: Hioki Model: 9290-10

Measurement range 0 to 1000 A AC (50/60 Hz, continuous use), Maximum 1500 A AC (50/60 Hz, 5 minutes or shorter) CT ratio 10 : 1. Accuracy (at 45 to 66 Hz) Amplitude: +/-1.5 percent rdg. at primary current 10 to 1500 A. Phase: +/-1.0 degree max. at primary current 10 to 1500 A. Frequency characteristics Amplitude: 40 to 1 kHz / +/-1 percent rdg. , 20 to 4 kHz / +/-2.5 percent rdg. Phase: 40 to 1 kHz / +/-1.0 degree max. , 20to 4 kHz / +/-3.0 degree maximum. Max. circuit voltage 600 V AC rms (insulated wire). Core jaw diameter 2-5/32" or 3-9/64" width busbar. Secondary core diameter 1-3/64" by 1-3/64". Dimensions 3-57/64" Width by 7-5/8" height by 1-19/64" depth, 3m cord length. Accessories Mark band (6). 1 year warranty.

Manufacturer: IDI Brand: IDGroup

Contact Probes HEADED 60 DEG CHISEL ROTATOR OPTION

Manufacturer: Fluke Corporation Brand: Fluke Model: I1010

The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.

Manufacturer: Fluke Corporation Brand: Fluke Model: I1010-KIT

Kit included i1010 1-600A AC rms, 1-1000A DC current clamp, zippered vinyl carry case with moveable divider. Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3949761

Fluke 5A clamp-on current transformer for 1750 3 phase power quality recorder.