Current Testers - Page 146

Manufacturer: Fluke Corporation Brand: Fluke Model: BP120MH

Battery pack as replacement battery in the Fluke 120 series ScopeMeters and in the Fluke 43 and 43B power quality analyzers. The BP120MH is a Nickel-Metal-Hydride battery pack, made specifically to support the ScopeMeters and power quality analyzers mentioned. The battery capacity is 3000 mAh, this is 50 percent more than that of the original BP120. As a results, the instrument-user will benefit from a much longer 'up time' than with the original NiCd battery, at the same volume and weight. The BP120MH is more environmental-friendly than the NiCd battery used before, as it contains no heavy metals. Just as before, the battery pack can be charged while installed in the instrument, using the PM8907 power adapter/charger. Nominal voltage: 4.8V. Capacity: 3000 mAh.

Manufacturer: Pomona Electronics Brand: Pomona Electronics

Test Leads 48" TEST LEAD BANANA

Manufacturer: Hioki Brand: Hioki Model: 9132-50

Simply connect to a tester or recorder to easily measure large currents. CE mark compliant CAT III 600V. For more accurate waveform recordings and analysis of harmonic signals, etc. Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10,000 times Rated current: AC 20/50/100/200/500/1000 A. Accuracy: +/-3 percent rdg. +/-0.2 percent f.s. (45 to 66Hz). Frequency characteristics: Add to amplitude accuracy for frequencies from 40 to 1kHz: +/- 1 percent rdg. Output rate: 0.2V AC f.s. (Connect to a voltage input device providing a high input impedance of 1 megaohm). Max. current input: (For 40Hz to500 Hz: 100 percent, and for 500Hz to 1kHz: within 90 percent of derating) 1000A RMS continuous (all ranges). Max. circuit voltage: 600Vrms (Insulated conductor). Diameter: 2-5/32" or 25/32" by 3-9/64" busbar. Measures: 3-15/16" width by 8-13/16" height by 1-3/8" depth, cord length: 3m.

Manufacturer: Amprobe Brand: Amprobe Model: AM-270

The Amprobe AM-270 is a commercial, true-rms multimeter for electrical and HVAC applications and is dedicated to electrical and HVAC professionals. Safety rated to CAT IV 600V and CAT III 1000V for outdoor and indoor applications requiring direct connection to the main panel of the building or measurement of the outdoor wiring connecting the building to the utility transformer. This true-rms multimeter measures complete range of electrical parameters including, voltage, current, resistance and frequency. It also covers HVAC application with temperature, capacitance ad micro amps functions. Amprobe began life in Long Island, NY in the late 1940's under the name Pyramid Instrument Company. In 1960 the company name was formally changed to Amprobe Instrument Corporation. Amprobe continued to design, engineer, manufacture and distribute product from its Lynbrook, NY location until it was merged to form ATP and relocated to South Florida in late 1999.

Manufacturer: FLIR Systems, Inc. Brand: Extech Model: CA3010

The CA3010 is a 3000A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA3010 is a 10 inch flexible clamp capable of measuring AC Currents up to 3000A. Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs and two AAA batteries. UL listed with a CAT IV 600V safety rating.

Manufacturer: Extech Instruments Brand: Extech Model: MA435T

These clamp meters are ideal for general and commercial applications. Units include additional multimeter functions for added flexibility. The compact rugged design is ideal for challenging environments and allows easy access to confined locations. What's included:Test leads, general purpose type K bead wire temperature probe, soft case, and 9 V battery. Compact size allows measurements in tight locations Built-in non-contact voltage detector with LED alert 1.2" (30 mm) jaw size for conductors up to 350 MCM Data hold Backlit LCD display Low battery indication and auto power off True RMS capability

Manufacturer: Amprobe Brand: Amprobe Model: ACD-14 TRMS-PLUS Color: Multicolored

The ACD-14 TRMS-PLUS is the professionals’ choice for both HVAC & Electrical applications due to its complete set of measuring features. Its dual displays allows viewing amperage and voltage simultaneously. True RMS voltage and current measurements for more precise results when measuring in noisy AC environments.

Manufacturer: Extech Instruments Brand: Extech Model: 38389

EXTECH INSTRUMENTS 38389 DMM, CLAMP, AUTO, 600A, 4DIGIT

Manufacturer: Dawson Tools Brand: Dawson Tools Model: DCM731

The DCM731 measures AC/DC Current, AC/DC voltage, resistance, capacitance, continuity, diodes, frequency, duty cycle, type-K temperature and a non-contact voltage test. With a long list of features, including an easy to read display, this clamp meter is an ideal tool for professional users. Measures:• AC/DC Current• AC/DC Voltage• Resistance• Continuity• Diodes• Capacitance• Frequency• Duty Cycle• Type-K temperature• µA AC/DC Current Additional Features:• 6000 count LCD display• True RMS• Auto and manual range• Non-contact voltage detector• Auto power off• Data hold• Relative measurement• Backlight• Work light• Low battery indicator.

Manufacturer: Fluke Brand: Fluke Model: 4542300

Li-Ion Battery for Fluke Battery Analyzers with 7.4V, 3000mAh.