Current Testers - Page 150

Manufacturer: ETCR Brand: ETCR

Technical Specifications: Measurement Range:0mA~600.0A Resolution:1mA Accuracy(23℃±3℃, below 70%RH):0~60A----±1.5%±5dgt 60A~200A--------±2%±5dgt 200A~300A-------±3%±5dgt 300A~600A-------±4%±5dgt Process Type:Clamp CT, Integral Approach Display Type:4 Digits LCD LCD Dimension:35mm×21.5mm; Display Dimension: 32mm×15mm Sampling Rate:2 Times/Second Frequency:50Hz, 60Hz Automatic identification Shifting:Automatic Shift Line voltage:Below AC 600V RS232 Interface:With RS232 interface, Data stored in the memory can be uploaded to the computer, with software monitoring Data Memory:99 sets, "FULL" Blinking when memory is full Peak Maintaining:Peak value capture hold function, press HOLD without Release to display peak value Reading Hold:Reading hold function: "DH" symbol display Overflow display:Range overflow function: "OL" symbol display Automatic Shutdown:5 minutes after the boot Battery Detection:When battery voltage is lower than 7.2V, low battery symbol will shown to remind battery replacement. Rated Power:5mW Working Temperature and Humidity:0℃~40℃; below 80%rh Storage Temperature and Humidity:-10℃~60℃; below 70%rh Insulation Strength:AC2kV/rms (between core and box) Safety Provisions:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Manufacturer: ETCR Brand: ETCR

Technical Specifications: Measurement Range:0.0mA~6.00A DC Resolution:0.1mA DC Accuracy(23℃±3℃,below 70%RH):0.0mA~300.0mA DC: ±2%rdg±5dgt 0.30A~6.00A DC: ±2%rdg±5dgt Test Mode:Clip-on CT,The magnetic modulation Clamp Size:25mm×30mm Shield Property:Double shielding technology, strong anti-jamming capability Display Mode:4 digits LCD display LCD Dimension:35mm×21.5mm;display domain:32mm×15mm Sampling Rate:2 times/s Range Shift:0.0mA~6.00A DC Automatically Zero clearing:Press the ZERO key can be reset before the test Polarity Indication:auto identified and display"-" Test Position:Tested wire in the jaw center Line Voltage:600V DC USB Interface:Data stored in the memory of the meter via USB upload to PC Data Memory:99units, FULL blinks when the memory is full Peak Maintaining:Peak value capture hold function, press HOLD without Release to display peak value Reading Hold:DH indicating the reading is hold Out of Range:OL indicating the current is out of range Auto Power-off:5 Minutes after power on, it will power off automatically to lower the power consumption Battery Voltage:Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed Working Current:20mA Humiture:-10℃-50℃,below 80%rh Limit Temperature Error:-10℃-0℃ and 40℃-50℃, within 2%rdg Humiture Storage:-10℃-60℃,below 80%rh Insulating Strength:AC 3700V/rms. (between the alloy of the clamp and the housing) Applicable safety rules:IEC1010-1,IEC1010-2-032,pollution:2,CAT Ⅲ(600V)

Manufacturer: Fluke Corporation Brand: Fluke Model: 323-AMZN

The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.

Manufacturer: Morris Brand: Morris

Cat III Autoranging 200A Open Jaw Clamp Meter - Autoranging 200 amp Clamp Current Meter.Cat III Autoranging 200A Open Jaw Clamp Meter features include: Open jaw digital electrical meter Diode test Continuity test Duty cycle test function Auto and manual range Relative Measurement Data hold Backlit auto off time limit mode Test leads and back storage Display: 3999 counts Decimal Point Readings Meets IEC61010-1 concerning safety requirements DCV: 4/40/400V±0.7%, 1000V±0.8% ACV: 4/40/400V±0.8%, 700V±1.0% ACA: 200A±3.0% (50Hz to 400Hz) Resistor: 400/4K/40K/400K/4M ohms ±1.2%, 40M ohms ±2.0% Capicitance: 40n/400n/4µF ±4.0% Frequency: 10Hz to 100KHz ±2.0% Duty Cycle: 0.1% to 99.9% Power: Battery (1) 9v Battery 200A Clamp Current Meter Size: 7.6" X 2.7" X 1.7” Weight: Approx. 9.2oz. cETLus Listed Order Qty of 1 = 1 Piece Below is more info on our Cat III Autoranging 200A Open Jaw Clamp Meter

Manufacturer: Extech Instruments Brand: Extech Model: 38389-NIST

Auto ranging True RMS AC/DC Clamp Meter with Capacitance and Temperature functions. This Product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).

Manufacturer: ETCR Brand: ETCR Model: ETCR2100A+

The lead time is about 2-3 business days; FedEx/DHL delivery time is about 5-7 days. Specificaiton: •Function:Ground resistance test, Loop resistance test •Power Supply:6VDC 4 PCS of AA Alkaline batteries •Resistance Range:0.01-200Ω •Resistance Resolution:0.001Ω •Highest Resistance Accuracy:±1%±0.01Ω •Data memory:99 Sets •Alarm Threshold Setting Range:Resistance: 1-199Ω •Alarm Sound and Light:"Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold. •Interference Signal Recognition:"Beep-beep-beep" tone, NOISE symbol blinking •Working Temperature and Humidity:-20℃-55℃；20％RH-90％RH •LCD Screen:4 Digits LCD display, Screen L×W: 47mm×28.5mm •Clamp Size:Φ32mm •Clamp Opening Extent:32mm •Tester Weight:1160g (With batteries) •Clamp Dimension:L×W×T: 285mm×85mm×56mm •Protection Level:Dual Insulation •Structural Feature:Clamp CT •Shifting:Automatic shifting •External magnetic field:＜40A/m •External electrical field:＜1V/m •Single measurement time:0.5 second •Resistance measurement frequency:＞1KHz •Measured current frequency:50/60Hz Automatic measurement •Low Battery Indication:Low battery symbol displays when battery is lower then 5.3V •Memory Full Indication:MEM symbol blinks when all 99 sets memory is full •Over Range Indication:Out of range indication "OLΩ", "L0.01" or "OL A" •Auto Power-off:5 minutes after Boot up •Power Consumption:Max 50mA either in booting up or normally working, Continuously working for 30 hours

Manufacturer: Ideal Industries Brand: Ideal Industries Model: 61-704

The Ideal Industries 61-704 digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, capacitance, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) to 200A (amperes). The clamp has two jaws that can close around an electrical conductor up to 33mm (1.3 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 750V, DC (direct current) voltage to 1,000V, capacitance to 200μF (microfarads), frequency to 1kHz (kilohertz), and resistance to 200kΩ (kilohms). The test leads are silicone-insulated for flexibility and resistance to heat and cold. The meter has a rotary switch to select the property to measure, and a 2,000-count LCD with a backlight for visibility in low light that turns off automatically after 60 seconds.The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. When contact is made with a voltage greater than 30V, a beeper sounds, a red high-voltage LED blinks, and the meter shakes. The meter has a clean power indicator that turns off when the circuit has more than 5% (+ or -2%) of THD (total harmonic distortion) which can degrade the quality of the power being supplied by the system. The maximum function captures the highest reading displayed during a measurement session. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. The unit operates on a single 9V battery, and turns off automatically after 60 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when ...

Manufacturer: Amprobe Brand: Amprobe Model: HD110C

The Amprobe HD110C IP67 digital multimeter is an average-sensing, manual-ranging meter for measuring current, voltage, and resistance in electrical testing applications with high voltage and harsh environmental conditions. The meter measures alternating current (AC) and direct current (DC) to 2 amp, AC voltage to 1,000 volts (V), DC voltage to 1,500V, and resistance to 20 megaohms. The meter comes with a set of detachable high-voltage test leads and two threaded alligator clips for connecting to high-voltage conductors. The meter's molded plastic case is made from flame-retardant thermoplastic to help protect against fire, chemicals, grease, falls, impacts, and abrasions. The case is sealed to prevent water and dirt from entering and it has an ingress protection rating of IP67, meaning it provides complete protection against dust and is waterproof when submerged up to 1 meter. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. The hold function keeps a reading on the display, even after the meter is disconnected. An auto power-off mode turns off the unit after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced.This average sensing, or average responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is a manual-ranging meter and requires that the operator choose the appropriate operating range. The meter has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 1,000V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices. The meter...

Brand: Quantong

Features: 1.High Resolution DC 1mA, AC 0.1mA 2.Connect to an Oscilloscopes to observe Current Waveform 3.Connect to Chart Recorder/Datalogger/ DMM to Record Current Data Range : DCA 0-400mA DCA 0-4A DCA 0-30A ACA 0-400mA ACA 0-4A ACA 0-30A Output : DC 1mV/A DC 100mV/A DC 10mV/A AC 1mV/A AC 100mV/A AC 10mV/A Sensitivity :1mA/mV DC 10mA/mV DC 0.1A/mV DC 1mA/mV AC 10mA/mV AC 0.1A/mV AC Accuracy : +/- 2.0% +/- 1mV +/- 1.0% +/- 0.5mV +/- 1.0% +/- 0.3mV +/- 2.0% +/- 0.5mV +/- 1.5% +/- 0.8mV +/- 1.5% +/- 0.3mV AC 10mV/A 0.1A/mV AC +/- 1.5% +/- 0.3mV

Manufacturer: Hioki Brand: Hioki Model: 9010-50

Simply connect to a tester or recorder to easily measure large currents. CE mark compliant CAT III 600V. For more accurate waveform recordings and analysis of harmonic signals, etc. Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10,000 times. Rated Current: AC 10/20/50/100/200/500 A. Accuracy: +/-2 percent rdg. +/-1 percent f.s. (45 to 66Hz). Frequency characteristics: Add to amplitude accuracy for frequencies from 40 to 1kHz: +/-6 percent rdg. (at 10A and 20A range). +/-3 percent rdg. (for 50A range and above). Output rate: 0.2V AC f.s. (Connect to a voltage input device providing a high input impedance of milliohm). Max. current input: (For 40Hz to 100Hz: 100 percent, and for 100Hz to 1kHz: within 50 percent of derating). 150A RMS continuous (10/20/50A ranges). 400A RMS continuous (100/200A ranges). 650A RMS continuous (500A range). Max. circuit voltage: 600Vrms (Insulated conductor). Measures: 3-1/16" width by 7-25/64" height by 1-3/8" depth, 1-51/64" diameter, cord length: 3 meter.