Current Testers - Page 204

Manufacturer: Hioki Brand: Hioki Model: 9657-10

Measurable conductor diameter: 40mm. Primary current rating: AC 10A. Output voltage: AC 100mV/A. Amplitude accuracy (45 to 66 Hz): +/-1.0 percentrdg.+/-0.05 percent f.s. Phase accuracy (50/60Hz): within +/-3 degree . Residual current: 5mA (100A on forward and return). Frequency characteristic (accuracy deviation): within +/-3 percent at 40Hz to 5kHz. Maximum rated voltage to earth: 300Vrms (insulated conductor). Maximum allowable input: 30A continuous. Measures: 74mm width by 145mm height by 42mm depth.

Manufacturer: Extech Instruments Brand: Extech Instruments Model: EX830

Theses clamp-on multimeters priovide a built-in IR thermometer with laser pointer that makes troubleshooting heat sensitive areas simple. Features include data hold, Min/Max, autoranging with manual range button, auto power off, and an easy-to-read 4000 count backlit dual LCD display. Peak hold captures inrush currents and transients, and models 26834-22, -24 include true RMS and a type K thermometer probe. Units ar CAT III, 600V rated. Model 26834-26 is CAT IV 600V rated. Clamp meter, multimeter and infrared thermometer all in one! Locate hot spots and overheating equipment with built-in IR thermometer Compact and powerful, the Extech EX830 1000-Amp True RMS AC/DC Clamp Meter with Infrared Thermometer provides the versatility of multiple meters in one convenient device. The EX830 measures AC/DC voltage and current, resistance, diode, continuity, frequency, and capacitance. It also includes a built-in infrared thermometer for detecting invisible hotspots, a DC Zero function, a Type K bead wire temperature probe, and True RMS to ensure accurate measurements without distortion from electronic devices. A large, backlit display allows for easy reading, while the ergonomically designed housing offers comfortable, one-handed operation.1000A True RMS AC/DC Clamp Meter with IR ThermometerAt a Glance:Accurately reads electrical measurements, including DC currentBuilt-in, non-contact infrared thermometer detects invisible hot spotsType K bead wire probe for measuring temperatureLarge LCD screen with backlit display for clear viewingDurable, ergonomic design for easy one-handed operationThree-year limited warranty on parts and laborEX830 clamp-on multimeter with built-in InfraRed Thermometer is ideal for industrial applications. View larger.Multipurpose Meter in One Convenient DeviceThe Extech EX830 offers multiple functions so service technicians can carry only one meter into the field instead of several. The EX830 will measure both AC and DC current, AC/DC voltage, frequency, resistance, capacitance, diode, and continuity...

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 8141

Kyoritsu 8141 leakage current clamp sensor. In order to monitor energy saving and to control the electric facilities, it is essential and imperative to control the leak and load currents from mains and branch power lines up to the equipment. Clamp sensor is easy to carry and simple to install. Rated current 1000mA AC. 24mm conductor size. Accuracy: +/- 1.0 percent rdg +/- 0.1mV (50/60Hz), +/- 2.0 percent rdg +/- 0.1mV (40Hz to 1kHz). Output voltage: AC 100mV/1000mA (AC 100mV/A). Output connector: Mini-DIN 6-pin. 0 to 50 degree c temperature range. Withstand voltage: 3540V AC for 5 seconds. Approximate 2m cable length. Approximate 180 ohm output impedance. Accessories includes: portable case, instruction manual. Measures 100 mm length by 60 mm width by 26mm depth.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV200

' Infrared Window, Crystal Insert Size 50mm dia., Viewing Aperture Size 45mm dia., Window Thickness 2mm, NEMA Rating 4, 12, IP Rating 67, Gasket Maximum Temperature 232 Degrees C (450 Degrees F), Body Maximum Temperature 232 Degrees C (450 Degrees F), Optic Maximum Temperature 232 Degrees C (450 Degrees F), Voltage Range Any, Components CV200, ClirVu(R) Infrared Window, Body Material Zinc/Aluminum Alloy, Includes Hand Turn Door, Manufacturers Warranty Length Limited Lifetime '

Manufacturer: ETCR Brand: ETCR Model: ETCR2100+

The lead time is about 2-3 business days; FedEx/DHL delivery time is about 5-7 days. Specificaiton: •Function:Ground resistance test, Loop resistance test •Power Supply:6VDC 4 PCS of AA Alkaline batteries •Resistance Range:0.01-1200Ω •Resistance Resolution:0.001Ω •Highest Resistance Accuracy:±1%±0.01Ω •Data memory:99 Sets •Alarm Threshold Setting Range:Resistance: 1-199Ω •Alarm Sound and Light:"Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold. •Interference Signal Recognition:"Beep-beep-beep" tone, NOISE symbol blinking •Working Temperature and Humidity:-20℃-55℃；20％RH-90％RH •LCD Screen:4 Digits LCD display, Screen L×W: 47mm×28.5mm •Clamp Size:Φ32mm •Clamp Opening Extent:32mm •Tester Weight:1160g (With batteries) •Clamp Dimension:L×W×T: 285mm×85mm×56mm •Protection Level:Dual Insulation •Structural Feature:Clamp CT •Shifting:Automatic shifting •External magnetic field:＜40A/m •External electrical field:＜1V/m •Single measurement time:0.5 second •Resistance measurement frequency:＞1KHz •Measured current frequency:50/60Hz Automatic measurement •Low Battery Indication:Low battery symbol displays when battery is lower then 5.3V •Memory Full Indication:MEM symbol blinks when all 99 sets memory is full •Over Range Indication:Out of range indication "OLΩ", "L0.01" or "OL A" •Auto Power-off:Auto Power-off •Power Consumption:Max 50mA either in booting up or normally working, Continuously working for 30 hours

Manufacturer: Greenlee Textron Brand: Greenlee Model: CM-1560

Greenlee AC True rms clamp meter is designed to measure AC currents, DC voltages, resistance and frequency. It includes digital low pass filter for precise readings on variable frequency drives. Clamp meter easily tests continuity and diodes. It can record average, maximum/minimum readings. Clamp meter comes with two voltage detection modes that is non-contact or single test lead. It has a two 1.5V AAA batteries, test leads and case for comfortable carrying. Clamp meter has AmpTip that provides increased accuracy on small wires carrying low currents. It gives precise measurements of the current up to 60600 Amps. Clamp meter has a 6000 count LCD display. It has a 1.18-Inch jaw opening. Clamp meter offers accurate measurements of voltage rating up to 600 VAC/DC. It easily holds data and gives exact measurements on the resistance range of 600, 6/60k Ohm. It offers correct measurements of frequency rating for voltage/AmpTip currents at 50/60 Hz and higher currents at 50 - 400 Hz. Clamp meter is UL listed.

Manufacturer: AEMC Brand: AEMC Model: SR701

The SR701 has jack output terminations that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift and wide frequency response are important. The Model SR701 is designed for use in industrial and utility environments. The unique ergonomic design allows it to easily clamp onto cables or small bus bars. It is built to the highest safety and performance standards including the CE Mark and is UL approved for Canada and United States. Excellent transformation and low phase shift, plus a broad frequency response, permit accurate measure-ments of current for power and power quality measurements. The high quality magnetic cores and uniform windings provide sensitivity for very low level current measurements, as well as measurements up to 1200AAC. The Model SR701 works as a traditional current transformer (with a ratio of 1000:1) and provides current outputs in mA/A for use on DMMs, power and harmonic meters, data loggers, recorders or instruments with current ranges. The Model SR701 uses a custom Nickel Cove to improve accuracy and phase shift on the low end of the measurement range. Ergonomic design and easy operation. Available with mA output signals. Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters. Applications: power quality measuring, low industrial loads, measuring around cable bundles, power load monitoring, waveform analysis. Overload: 1200A for 40 min ON, 20 min OFF. Frequency Range: 30Hz to 5kHz; current derating above 1kHz using the formula: 1000A x 1F (in kHz). Working/Common Mode Voltage: 600Vrms CAT III. Operating Temperature: -14 to 122 degree F. Storage Temperature: -4 to 158 degree F. Operating Relative Humidity: 0 to 85 percent at 35 degree C. Measures: 4-23/64" length by 8-1/2" width by 1-49/64" height. Polycarbonate Material: Handles: Polycarbonate + ABS, Gray, UL94 V0. Jaws: Polycarbonate, Red, UL94 V0.

Manufacturer: IDI Brand: IDGroup

Contact Probes .10 CTR 3 AMP PROBE HEADED TULIP STEEL

Manufacturer: IDI Brand: IDGroup

Contact Probes .10 CTR 3 AMP PROBE HEADED TULIP STEEL

Manufacturer: Extech Brand: Extech Model: EX840 Color: Multicolor

Theses clamp-on multimeters priovide a built-in IR thermometer with laser pointer that makes troubleshooting heat sensitive areas simple. Features include data hold, Min/Max, autoranging with manual range button, auto power off, and an easy-to-read 4000 count backlit dual LCD display. Peak hold captures inrush currents and transients, and models 26834-22, -24 include true RMS and a type K thermometer probe. Units ar CAT III, 600V rated. Model 26834-26 is CAT IV 600V rated. Clamp meter, multimeter and infrared thermometer all in one! Locate hot spots and overheating equipment with built-in IR thermometer