Current Testers - Page 23

Manufacturer: Fluke Corporation Brand: Fluke Model: HART DRYWELL CABLE

Fluke HART DRYWELL CABLE Cable Kit, Hart Drywell Control

Brand: Richpower Industries, Inc.

The Genesis GCWS9500 Clamping Work Station is one of the most useful and versatile tools on the market. It's like having a pair of sawhorses, a vise, and a miter saw stand all built into one to tackle your next project and the unique foot clamp is like having an extra set of hands when maneuvering large and awkward work pieces. An incredible 2200 pounds of clamping force and a reversible quick-release clamping jaw for small or oversized work pieces.

Manufacturer: Fluke Brand: Fluke Model: R-FLUKE-902

The Fluke 902 delivers the features necessary to diagnose and repair HVAC systems.If you're an HVAC service technician, the 902 helps you get more done without the need to carry multiple meters. That's because it is designed for the systems you service and install daily. With True RMS technology and a CAT III 600 V rating, you can troubleshoot and maintain HVAC equipment safely and with confidence in the results. Capacitance / Accuracy: 1 µF to 1000 µF / 1.9% +/-2 counts

Manufacturer: Johnson / Emerson Connectivity Solutions Brand: Johnson / Emerson Connectivity Solutions

Test Plugs & Test Jacks BANANA PLUG RED

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: CM57

The CM57 is a Flexible Clamp Meter with Bluetooth and is an ergonomic tool designed to simplify your work every day. Made with a narrow, 45 cm (18") flexible coil clamp for larger jobs, you can easily take measurements in tight or awkward spots, without any tangling wires or cables. With Bluetooth communication for remote viewing and data transfer to mobile devices via FLIR Tools Mobile, you can see and analyze your data on the job. Comes with 2 x AAA batteries, a quick start guide and a user manual on CD.

Manufacturer: Hioki Brand: Hioki Model: 9695-02

Measurable conductor diameter: 15mm. Primary current rating: AC 50A. Output voltage: AC 10mV/A. Accuracy Amplitude (45 to 66 Hz): +/-0.3 percent rdg. +/-0.02 percent f.s. Accuracy Phase (5Hz to 5kHz): within +/-2 degree. Frequency characteristic (accuracy deviation): within +/-1.0 percent at 40Hz to 5kHz. Maximum rated voltage to earth(insulated conductor): 300Vrms. Maximum allowable input (45 to 66 Hz): 60A continuous. Measures 51mm width by 58mm height by 19mm depth.

Manufacturer: TES Instruments Brand: TES Instruments Model: TES-3050

Product Features: EN61010-1 600V INSTALLATION VAT III POLLUTION DEGREE 2, 3-3/4 Digital LCD with bar-graph, Auto-ranging off / Data Hold / Peak Hold / MAX/MIN mode, Zero Adjustment/Relative Reading .

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 2003A

The Kyoritsu 2003A digital clamp-meter is an average-sensing, auto-ranging multimeter for measuring current, voltage, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) and DC (direct current) to 2,000A (amperes). The clamp has two jaws that can close around an electrical conductor up to 55mm (2.16 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 750V, DC voltage to 600V, and resistance to 4,000Ω (ohms). The meter has a rotary switch to select the property to measure, and a 4,000-count LCD. The maximum function displays the highest reading measured during a 400ms (millisecond) sample. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. For long-term monitoring of current, the meter comes with an output plug for attaching to a recording device (sold separately). The unit operates on two 1.5V AA batteries, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This average-sensing, also called average responding or mean value, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. The meter meets IEC (International Electrotechnical Commission) safety standards 61010-1, 61010-031, and 61010-2-032, and is rated for CAT (category) IV installations to 600 volts, which covers equipment at the origin of the installation, such as electricity meters and primary ove...

Manufacturer: Hioki Brand: Hioki Model: 3281

The Hioki 3281 digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) to 600A (amperes). The clamp has two jaws that can close around an electrical conductor up to 33mm (1.3 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 600V, frequency to 1,000Hz (hertz), and resistance to 10kΩ (kilohms). The meter has a rotary switch to select the property to measure, and a 3,000-count LCD that shows the reading numerically and in a 35-segment bar graph. The crest factor function uses a 1.00 to 5.00 scale to measure the quality of an AC signal and its ability to generate a particular voltage or current. The record function displays the maximum, minimum, and average readings for a property after the function is engaged. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. The unit operates on a single 9V 6F22 battery, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. It meets EN (European Standard) safety standard 61010, and is rated for CAT (category) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed...

Manufacturer: StandardPlumbing: Kohler Brand: UEI Test Equipment Model: CA30MA

Founded in Vancouver, BC in 1946, UEi Canada Inc. is a leading distributor of portable testing and measuring equipment for the HVAC and Electrical industry. In 1987, UEi Canada joined the Kane Group of companies with sister companies in England and United States.