|
|
-
3.9 of 5.0 with 48 Reviews
SALE PRICE: $40.46 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 2117.76
Manufacturer: AEMC
Brand: AEMC
Model: 2117.76
The AEMC canvas bag is designed as a carrying case for ground resistance tester accessories. The bag is made from black canvas for durability and closes with a zipper. Measurements are 17 x 6.5 x 2.75 inches (L x W x D). AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA.
-
3.9 of 5.0 with 43 Reviews
SALE PRICE: $146.30 5% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 2118.82
Manufacturer: AEMC
Brand: AEMC
Model: 2118.82
AEMC 2118.82 Kelvin Clips 10 ft (1A) for Micro-ohmmeters 5600, 6240 & 6250
-
3.9 of 5.0 with 11 Reviews
SALE PRICE: $379.50 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 2119.56
Manufacturer: AEMC
Brand: AEMC
Model: 2119.56
5 Pieces Fuse set, 0.1A, 660V, 0.25" by 1.25" for meg-ohm meter.
-
3.9 of 5.0 with 16 Reviews
SALE PRICE: $525.00 1% OFF
Manufacturer: Megger
Brand: Megger
Model: 6111-503
Manufacturer: Megger
Brand: Megger
Model: 6111-503
|
The Megger 6111 series two-piece duplex test lead set with spring-loaded duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, and BT51 digital microhmmeters. These duplex test leads measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The spring-loaded hand spikes compress to make contact with a conductor. Light-emitting diodes (LEDs) on one probe confirm connection and the presence of live current when used with the Megger DLRO10 microhmmeter, and can indicate test pass/fail when used with the Megger DLRO10X microhmmeter. There is 0.23" (6 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integri...
-
3.9 of 5.0 with 27 Reviews
SALE PRICE: $533.34 1% OFF
Manufacturer: Megger
Brand: Megger
Model: 242041-30
Manufacturer: Megger
Brand: Megger
Model: 242041-30
|
The Megger 242041 series current test lead set includes one red and one black test lead with terminal clips for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. When used with compatible potential leads, the Megger 242041 series current test lead set allows the operator to take four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The leads have a maximum test current input of 10 amp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardizatio...
-
3.9 of 5.0 with 36 Reviews
SALE PRICE: $820.00
Manufacturer: Megger
Brand: Megger
Model: 242002-7
Manufacturer: Megger
Brand: Megger
Model: 242002-7
|
The Megger 242002 series duplex test lead with fixed-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. There is 0.35" (9 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization ...
-
3.9 of 5.0 with 3 Reviews
SALE PRICE: $950.00 4% OFF
Manufacturer: Megger
Brand: Megger
Model: GA-90001
Manufacturer: Megger
Brand: Megger
Model: GA-90001
The Megger GA-90001 two-piece Kelvin clamp cable kit is used to conduct resistance tests with a Megger MOM2 digital microhmmeter (sold separately). The kit consists of one 1.3m (4 ft.) red cable and one 3m (10 ft.) black cable, both with Kelvin clamps. The GA-90001 is used to conduct resistance tests of electrical equipment with a MOM2 digital microhmmeter.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.
-
3.9 of 5.0 with 22 Reviews
SALE PRICE: $1,587.99 1% OFF
Manufacturer: Besantek
Brand: Besantek
Manufacturer: Besantek
Brand: Besantek
|
The BESANTEK BST-MGR01 Digital Low Resistance Oh is a "Full Feature Professional Instrument". The RUGGED and O-RING" SEALED Digital Low Resistance Ohm and Contact Meter is Specially Designed to Measure Very Low Resistance Accurately. Four terminal measurement.. Protection against inadvertent connection to over-voltage/(crow bars for current and voltage). Clear & large LCD.. Potential lead resistance and current lead resistance checks.. Full-featured EnerSaveTM inside.. EnerSaveTM Auto-hold.. EnerSaveTM Auto-off.. Rechargeable battery operated.. Robust & compact.. Indicators show if reading may be invalid (Rp, Rc, and temperature).. O-Ring sealed case.. Technical Specifications: . Low resistance range / resolution: 0-2.000mOhm / 1?Ohm , 0-20.00mOhm / 10?Ohm , 0-200.0mOhm / 100?Ohm , 0-2.000Ohm / 1mOhm , 0-20.00Ohm / 10mOhm , 0-200.0Ohm / 100mOhm.. Accuracy: 0-2.000mOhm : ±(5%rdg+5dgt) , 0-20.00mOhm : ±(4%rdg+4dgt) , 0-200.0mOhm : ±(4%rdg+4dgt) , 0-2.000Ohm : ±(3%rdg+4dgt) , 0-20.00Ohm : ±(2%rdg+4dgt) , 0-200.0Ohm: ±(2%rdg+4dgt).. Test current (dc): 2.000mOhm to 200.0mOhm: 1A±3% , 200.0mOhm to 20.0Ohm : 100mA±2% , 200.0Ohm : 10mA±1.5%.. Maximum output voltage (C1 ~ C2): 10V.. Dimensions: 330(L) x 260(W) x 160(D)mm.. Weight (battery included): Approx. 3200g.. Power source: Rechargeable battery.. Safety standard: EN 61010-1 , EN 61326-1. Accessories: Instruction manual, Test Leads, Charger.
-
3.9 of 5.0 with 14 Reviews
SALE PRICE: $1,721.00 3% OFF
Manufacturer: Rohde & Schwarz
Brand: Rohde & Schwarz
Model: 5800.0139.02
Manufacturer: Rohde & Schwarz
Brand: Rohde & Schwarz
Model: 5800.0139.02
The HMP series has set an 'all new standard' in the 200/400W power range. Units have a set- and read-back resolution of up to 1mV/0,1mA. Even fully loaded, the residual ripple voltage stays below 150µVrms. The outputs, earth-free and electrically insulated, can be synchronized using their current- or voltage-tracking functionality. In case of an over-load of one channel, the 'Fuse Link' feature can synchronously shut down all logically linked outputs. To complete the picture, users can easily set up basic voltage- and current curves using the 'EasyARB' function. For easy integration into 19" rack mount systems, all outputs and sense inputs are also available on the rear side of the devices.
-
3.9 of 5.0 with 27 Reviews
SALE PRICE: $1,826.11 1% OFF
Manufacturer: Rohde & Schwarz
Brand: Rohde & Schwarz
Model: 5800.2731.02
Manufacturer: Rohde & Schwarz
Brand: Rohde & Schwarz
Model: 5800.2731.02
One, two or three channels - the R&SHMC804x power supplies with their specifications and wide range of functions are ideal for use in development labs and industrial environments. Due to their high energy efficiency, the linear power supplies remain cool and quiet, even at maximum load. Practical interfaces and connectors allow users to work quickly and conveniently with the R&SHMC804x, even in 19" racks.
|
|