Ohmmeters - Page 18

Manufacturer: SAMYO Brand: SAMYO Model: U-3388

This digital insulation tester is an ideal instrument that can be used in testing insulation of electric machines, cables, electronic equipments, electric facilities, etc. Its main features include: easy to operate, wide test range, highly stable performance, backlit LCD display, data hold and auto power off. Using a shoulder strap, it can be used by both hands. Insulation resistance text range: 0~200MΩ (250V±10% test voltage, Resolution: 100kΩ, Basic accuracy: ±(4.0%+2)) 0~200MΩ (500V±10% test voltage, Resolution: 100kΩ, Basic accuracy: ±(4.0%+2)) 0~2GΩ (1000V±10% test voltage, Resolution: 1MΩ, Basic accuracy: ±(4.0%+2)) Resistance text range: 0~2kΩ (Basic accuracy: ±(1.0%+5), Resolution: 1Ω) DCV text range: 0~1000V (Basic accuracy: ±(1.0%+5), Resolution: 1V) ACV text range: 0~750V (Basic accuracy: ±(1.5%+5), Resolution: 1V) Special function: Continuity alarm: Less than 50Ω±10Ω Data hold: Yes LCD backlight: Approx 10Sec. Function protection: Yes Low Battery Indication: Yes Input impedance: 10MΩ Sampling rate: 3 times/Sec. AC frequency response: 40-400Hz Operation mode: Manual range Max.display: 1999 LCD size: 75 x 52mm Operating Temperature: -15℃~55℃ Relative Humidity: Less than 75%RH Power source: 9V, 6 x 1.5V AA battery(Included) Package Content: 1 x Digital Insulation Tester 2 x Test lead 2 x Test Alligator clips 1 x Shoulder strap 6 x 1.5v batteries (Note:Sometimes we put the batteries in the battery compartment directly, please reposition the batteries correctly before you use.) 1 x User Manual

Manufacturer: Millipore Brand: Millipore

New Millipore Megohmmeter Sensor. Part Number: ZD0002256.

Manufacturer: 3M Brand: 3M

Continuous Static Control Workstation Monitor Eliminates audits and record keeping. Audible and visual alarms. Monitor workers, wrist-straps, bench tops, and ground connectors. Selectable test voltages (9 or 16V) and resistance limits (10 or 35 megohms). Dimensions: 16.5Wx8.3Dx3.5Hcm. This listing is for Each

Manufacturer: Megger Brand: Megger Model: 6111-518

The Megger 6111-518 DH6 handspike set is used to perform resistance tests with a Megger DLRO10, DLRO10X, or DLROHD digital microhmmeter (sold separately). The handspike set is safety rated to European Standard EN61010-1 Category IV 600V. The 6111-518 is used to conduct resistance tests of electrical equipment with a DLRO10, DLRO10X, or DLRO10HD digital microhmmeter.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: AEMC Brand: AEMC Model: 6290

The AEMC 6290 digital microohm meter is a four-input with two adjustable test current/resistance ranges for precise, low-resistance measurements from 0.1 microohm (μΩ) to 19.99 milliohms (Ω) of switchgear and circuit breaker contact resistance and airframe, rail, and pipeline bonding. The test current can be adjusted from 10 to 100% of the range. Four input terminals enable Kelvin-type, four-wire resistance measurements, which are more accurate than two-wire resistance measurements. The memory function allows storage of up to 200 readings which can be downloaded to a PC with the included software. The software is compatible with Windows XP, Vista, 7, and 8, and requires at least 80MB of hard disk space. A cable with USB connector is included for connecting to a PC. Thermal sensors within the meter protect against damage due to overheating by disabling the test current when testing time reaches a set limit. Built into a hard carrying case, the meter has a 4-1/2-digit LCD with a backlight for visibility in low light. The display shows readings numerically and on a 35-segment bar graph. It has a 110V power cord for connecting to a 100 to 130V AC power supply. It comes with a set of Kelvin-type test leads with C-clamps, data download software, a USB interface cable, a 110V power cord, a 12A replacement fuse, an accessory pouch, and instructions. Milliohm meters are commonly used for electrical maintenance and testing in industries such as heating, ventilation, and air conditioning (HVAC), transportation, telecommunications, power plants, and utilities, among others. Accuracy and resolution specifications vary according to the range being measured. The meter meets International Electrotechnical Commission (IEC) safety standard 61010-1.Specifications Resistance measured0.1μΩ to 19.99mΩTest current/resistance ranges200A/1,999μΩ, 100A/19.99mΩStandards met International Electrotechnical Commission (IEC) safety standard 61010-1 Power supply110V power cord for AC power supplyWeight11kg/24.25 lbs.D...

Manufacturer: AEMC Brand: AEMC Model: 1060

The AEMC 1060 digital megohmmeter with RS-232 interface is an auto-ranging insulation tester with five test voltages—50, 100, 250, 500, and 1,000V—for measuring insulation resistance to 4,000GΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 400kΩ, with a capacitance to 5μF, and AC and DC voltage to 1,000V, disabling insulation testing when a voltage greater than 25V is detected. The R-DAR-PI (resistance-dielectric absorption rate-polarization index) function calculates and displays the DAR and the PI, which are measurements over time that give a more detailed indication of insulation condition than single-point measurements. The timer function allows timed testing from 1 to 59 minutes. High and low thresholds for insulation and resistance measurements can be set, triggering an alarm when readings fall outside the settings, and will be retained even after the meter is powered off. When measurement is complete, the meter enters voltage detection mode and automatically discharges residual voltage from the circuit under test. The meter can perform a continuity check up to 40Ω and buzzes to confirm that a circuit conducts electricity. With its RS-232 interface and software, the meter can be used with a PC for configuring the meter, storing and analyzing data, and generating reports. Its built-in document function allows printing of a preformatted report directly to a compatible printer. It has 128kB of memory for storing readings. Built into a double-insulated, dual-walled field case, the meter has a rotary switch for selecting the test voltage or property to be measured and has a dual 4,000-count LCD with a backlight for visibility in low light. The display shows readings numerically and on a 31-segment bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among oth...

Manufacturer: AEMC Brand: AEMC Instruments Model: 2129.80

AEMC 6240 Micro-Ohmmeter (10A, Instantaneous, Continuous, Multiple Test) (#2129.80)

Manufacturer: Megger Brand: Megger

Megger DET2/2 Auto Earth Tester is a robust compact instrument designed for measuring earth electrode resistance and soil resistivity. It uses the four terminal method of measurement which eliminates the resistance of the current circuit from the measurement. The circuit design ensures that the resistance of the potential circuit does not affect the measurement during practical testing. The instrument is microprocessor controlled and provides a flexible, 'user-friendly' approach to earth testing by giving good error detection capabilities and full test information on a large easily readable alpha-numeric display. A simple key pad can be used to adjust the test frequency, the test current level and the filtering so that adverse conditions influencing the test may be overcome.

Manufacturer: AEMC Brand: AEMC Model: 2130.32

The Megohmmeter is a high-end portable measuring instrument intended for the measurement of a wide variety of electrical insulation resistance values on cables and devices operating at high voltage.

Manufacturer: Megger Brand: Megger Model: 25511-845

Battery pack for Analog insulation tester. One battery required.