Power Meters - Page 3

Manufacturer: DENT Instruments Brand: DENT Instruments Model: CT-SHS-0005-B

These precision spilt core current transformers are the perfect working solution to measure proportional line current on a medium voltage three phase circuit. Simply attach to the 5A secondary output of the existing medium voltage CTs. Connecting to the secondary isolates you from the hazards associated with the primary CTs. No de-energizing or wire disconnection required. With excellent low current sensitivity and nominal phase shift error you are ensured of accurate measurements for all of your energy calculations.

Manufacturer: Dranetz Brand: Dranetz Model: EMMOD201

The EMMOD201 extensionmodule issimplysnapped onto the back of the A210,A220,A230 or A230s power instrument and issupplied with power bythe same. Parameterising is completely performed via the A200plus PC software.

Manufacturer: DENT Instruments Brand: DENT Instruments Model: EXC-UG-WI

Wifi With Internal Antenna Module Upgrade For Elitepro XC.

Manufacturer: Amprobe Brand: Amprobe

Technical Specification Item Clamp Meter Digital/Analog Digital Clamp Meter Jaw Style Clamp On Max. AC Amps 600 Max. AC Volts 600 Max. DC Volts 600 Max. Ohms 60, 000 Jaw Capacity 1-3/16 Temp. Range -40 Degrees to 752 Degrees F Counts 6000 Battery Type AAA Safety Rating CAT III 600V Calibration Certificate No AC Response TRMS Audible Continuity Yes Diode Test Yes Capacitance 2500uF Frequency Counter 5 to 999.9 Hz Peak Hold No Bar Graph No Display LCD Includes Infrared Thermometer Max. Conductor Size 1.18 (30.0mm) Auto Ranging Yes Non-Contact Voltage Detector Yes Data Hold Yes Inrush Yes Auto Power Off Yes Thermometer Type Type K Thermocouple AC Current Accuracy +/-2.0% + 5 Digits Operating Temp. 32 Degrees to 104 Degrees F Standards cULus, CE Special Features Amp Tip Function, Low Pass Filter, TRMS, Motor Rotation Indication, DC Micro Amps Manufacturers Warranty Length 1 yr. This listing is for each.

Manufacturer: Toflo Brand: Toflo

Toflo FC-SA40M-U10 Water Flowmeter, 0-24VDC, 0.2A, 4.8W CBBZ4003, 1-10 L/min

Manufacturer: Optical Design Manufacturing Brand: Optical Design Manufacturing Model: RP-460-02

Use ODM RP-460-02 to check the output at the patch panel or wall outlet in the premise telecom or broadband market. Connection to the fiber under test is made via the universal 2.5 mm adapter. Additional male or female connector adapter styles are available. ODM 400 Series Power Meter Data Sheet PDF [(FILE SIZE)KB]

Manufacturer: JDSU Brand: JDSU Model: 825

The JDSU OLP-35 SmartPocket InGaAs, +10 dBm Optical Power Meters is part of the JDSU family of pocket-sized and low-cost optical power meters the installation and maintenance of singlemode and multimode fiber optic networks. The JDSU OLP-35 SmartPocket Optical Power Meters offer an excellent price/performance ratio in a rugged and pocket-sized housing straight forward use in the field. Mainly used to measure optical power level (dBm) in premises, telco, or CATV fiber optic networks, they also can be combined with LED (OLS-34/OLS-36) or laser light sources (OLS-35/OLS-36) insertion loss measurement. Report generation with OFS-355 software, Extra long battery lifetime (>200 hours), 3-years calibration period, Universal optical interface all 2.5 mm / 1.25 mm connector, Individually settable wavelengths per 1 nm step

Manufacturer: Schneider Electric Brand: Schneider Model: METSEPM5110

PM5110 powermeter w modbus - upto 15th H - 1DO 33alarms - flush mount

Manufacturer: AEMC Brand: AEMC Model: 2125.74

The MTX Mobile Multimeter Model MTX 3281B-COMCM offers a resolution of 100,000 counts, 0.02% basic accuracy, 50kHz bandwidth. The unique design features a multi-position screen and push button function selection and is ideally suited for both bench top and hand-held use.

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N6733B

The Keysight N6733B is a 50 W basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control. This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 300 W. Programming accuracy (at 23°C ±5°C): -Voltage: 0.1% + 20 mV -Current: 0.15% + 20 mA Ripple & noise (20 Hz to 20 MHz): -Voltage rms: 3 mV -Voltage peak-to-peak: 14 mV -Current rms: 2 mA