Power Meters - Page 9

Manufacturer: AEMC Brand: aemc Model: 601

The TRMS Clamp-on Meter Model 601 provides a new standard for safety and measurement capability not available in any other clamp meter sold today. Safety Rated at 1000V CAT IV, it is safe to operate in all electrical environments. It is rugged enough for the most demanding work environments and will withstand both dust and water spray with its IP54 rating. It is ergonomically designed and easily used by one hand, including function selection and button pushing even with a glove on. In addition to the standard measurement of volts, amps, frequency, resistance, diode checking and continuity, the Model 601 offers several unequaled functions including: True InRush , Temperature measurement and more. Features: 1000V CAT IV Rated UL 94 flame retardant self-extinguishing IP54 Rated 10,000-count blue electroluminescent backlit display Measures up to 2000VAC (1400V peak), 1000VDC and AC+DC with resolution to 10mV Measures up to 1000AAC Tracks Min/Max and peak values Measures frequency to 20kHz with 0.1Hz Measures temperature in F or C using a K-type Thermocouple True InRush current measurement with 1mS capture Jaw opening up to 2.36 Leads are constructed with a flexible silicone material Applications: General purpose electrical troubleshooting Motor start up analysis Voltage troubleshooting Bond and continuity checking Temperature analysis

Manufacturer: Compliance West Brand: Compliance West

HTT-1R HimA, Function Checker, Ground (Pass 0.025 Fail 0.1 ohm) Leakage (Pass 424k Fail 200kohm) Arcover 750V ± 400V. The HTT-1R was designed to provide a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Bond Testers between calibration cycles, using actual component values which mimic the product being tested. It provides a stringent periodic check of your production line hipot and ground bond testers as required by TUV and others. The HTT-1R functions like our successful HTT-1 tester, but goes a step further by providing component values as the test loads, instead of opens and shorts provided by the HTT-1. By choosing one of our standard configurations conforming to your testing parameters (or custom parameters based on your requirements), the hipot and ground bond tester in use are checked by realistic component values which mimic the characteristics of your production items. The HTT-1R verifies the result of the three failure modes encountered in production hipot and ground circuit testing (open ground, high leakage current, and dielectric breakdown) separately or in any combination to verify proper test equipment operation. A passing test can also be simulated. The HTT-1R is designed to test up to 30A ground bond testers using these values to simulate actual operation. Connections to the Ground Bond Tester will add approximately 0.03Ω to these values.

Manufacturer: Optical Design Manufacturing Brand: Optical Design Manufacturing Model: RP-455-04

Use ODM RP-455-04 to check the output at the patch panel or wall outlet in the premise telecom or broadband market. Connection to the fiber under test is made via the universal 2.5 mm adapter. Additional male or female connector adapter styles are available. ODM 400 Series Power Meter Data Sheet PDF [(FILE SIZE)KB]

Manufacturer: DENT Instruments Brand: DENT Instruments Model: EXC-W-INT

This product is a weather right drop-in enclosure for use in harsh environments. (International Version).

Manufacturer: HP Agilent Brand: Agilent/HP Model: 70100A

HP 70100A Power Meter Manufacturer: Hewlett Packard Model: 70100A Features:100 kHz to 50 GHz Single-channel 1/8th rack-width -70 dBm to +44 dBm Automatic calibration and zeroing Selectable resolution to 0.001 dB HP-IBFull-feature module for the HP 70000 modular system The same flexible feature set and the same accuracy as the HP 437B in only half the rack space Also fully compatible with the HP 8480 series of power sensors l

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N6731B

The Keysight N6731B is a 50 W basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the device under test or to provide power for ATE system resources such as fixture control. This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard with all mainframes. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and power from 20 - 500 W. Accuracy (at 23°C ±5°C): -Voltage programming accuracy: 0.1% + 19 mV -Current measurement (readback) accuracy: 0.15% + 20 mA Ripple & noise (20 Hz to 20 MHz): -Constant voltage rms: 2 mV -Constant voltage peak-to-peak: 10 mv -Constant current rms: 8 mA Basic, single Output, programmable DC Power Module: -For use with the N6700 Series mainframes [LAN (LXI-C), USB, GPIB] : Low profile MPS or DC Power Analyzer -Up-programming and down-programming time with full resistive load (typical): 20 mS -Over Voltage, over current, and over temperature protection for your device under test

Manufacturer: Dranetz Brand: Dranetz Model: PR1500/SP8

All Current Probes listed here are compatible with Dranetz portable instruments: PowerXplorer, PowerGuide, PowerVisa, PowerGuia, Energy Platform, PP4300, 658 with CA4300 adapter; and Dranetz permanent instruments: Encore 61000 with 61MAC module, Signature System 5513. Adapters are available for use with other instrument configurations; contact us for details. Dranetz recommends only Dranetz-brand probes be used with Dranetz power quality equipment

Manufacturer: Hioki Brand: Hioki Model: 9203

Digital printer provides conventional printing of measurement values and decision results, and also a range of statistical and graphing functions, including maximum value, minimum value, average value, standard deviation, histograms, and process productivity index. Printing of process productivity index (Cp: dispersion, CpK: bias) for production line productivity management. Graph printing function for at-a-glance grasp of measurement changes. Data handing capacity: 99,999 values (maximum 5,000 for histogram and graph printing). Thermal printer for high-speed output. Thermal line printer. Lifetime : At least 2 million lines. Print medium : 9233 recording paper, 58mm × 10m (approximately 3000 lines equivalent). Clock : Real time or elapsed time printing (data printed). Maximum number of printed values : 1 to 99,999. Printed data selection : ALL, IN, HL, VAL (valid data only), OFF. Decision result codes : Hi, IN, Lo, OF, NG. Printing interval : manu/auto. Data handing capacity : 99,999 values. Functions computed : number of values, maximum, minimum, and average values, standard deviation, process productivity index, bias (upper and lower limit settings). Histogram printing: Data handing capacity : 5,000 values (if more than 5,000 present, most recent 5,000 values are used). Withstand voltage : Body to power supply 1.5 kV AC (current sensitivity 20 mA). Insulation resistance : Body to power supply at least 100 Mohm. Operating temperature and humidity range : 0 to 40 degree C, 80 percent R.H. maximum (no condensation). Power supply : 100 to 240 V AC(+/-10 percent, 250V max.), 50/60 Hz. power consumption: 30 VA max. Compatible models: 3227, 3540, 3560, 3550, 3551. Interface: Input: start or stop signal, Output: trigger or error signal, data/centronics. Accessories: Recording paper (1 roll), Power cord (1), Fuse (1), Connection Leads (2). Measures 8-29/64" width by 6-19/6" height by 2-1/8" depth. 1 Year warranty.

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: E3643A

Keysight basic DC power supplies offer essential features for a tight budget. The single & dual output, 30-100 W GPIB E3640 series provide small, compact size for bench and system use; low output ripple and noise; and built-in measurements and basic programmable features. The Keysight 48W, single output E3643A is a stable and reliable power supply for benchtop and basic automated test applications, and enables versatile solutions for tests that require moderate speed and precision with both GPIB and RS232. Output ratings (@ 0°C to 40°C): -Range 1: 0 to 35 V / 1.4 A -Range 2: 0 to 60 V / 0.8 A Programming accuracy (@ 25°C ±5°C), ±(% output + offset): -Voltage:

Manufacturer: Siemens Brand: Siemens

Technical Specification Item Power Meter Display No Display Mounting DIN Rail Input Voltage 80/346VAC Amps 4000 Accuracy +/- 0.20% Measures Voltage, Amps, Kwh, Kw, Kvarh, Kva, Kvah, Power Enclosure Rating Not Enclosed Hz 50/60 Meter Range 30 to 780A Operating Temp. Range 20 Degrees to 140 Degrees F Height 3.30 Width 9.50 Depth 1.60 Standards UL Listed, UL Standard 61010-1, IEC 61010-2-030 cUL Certified, CAN-CSA Standard C22.2 No. 61010-1 Features BACnet Modbus Compliance and Restrictions None This listing is for each.