Oscilloscope Accessories - Page 32

Manufacturer: Fluke Brand: Fluke Model: 4636967

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Fluke Corporation Brand: Fluke Model: 80I-110S

The 80I-110s is compatible with any fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter. It also compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter. It is designed to provide you with safe, high accuracy measurements for a wide range of applications. The specially designed built-in safety features such as the 600 V rms rating at the input jaws, output cable, and BNC connector enhance work safety in industrial and commercial power distribution systems. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems. Safety rating: IEC 1010 and CSA-C22.2 No. 1010-1 installation category II, working voltage 600V. Output signal: 10A range: 100mV/A; 100A range: 10mV/A. Bandwidth: 1Hz to 20kHz. 10 A, AC/DC, 100 A, AC/DC Nominal current range. 0.1A - 10A AC/DC and 1A - 100A AC/DC Continuous current range. 140 A - 2 kHz Maximum non-destructive current. 3 percent + 50 mA (at 10 A) basic accuracy. DC - 100 kHz Useable frequency. 600 V maximum voltage. 9 V, 55 h battery life. 11.8mm conductor diameter. 1.6m output cable length. 1 year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1630

Earth ground loop resistance measurements for commercial, industrial, and utility applications. The clamp-on ground testing technique used by the Fluke 1630 simplifies ground loop testing and enables non-intrusive leakage current measurement. The compact and rugged design makes the Fluke 1630 easy to use in small places and harsh environments, while the ‘display holdâ€TM and the continuity testing with an audible alarm function ensures convenience in use. The novel technique means that earth ground loop testing and continuity testing can be completed without breaking the circuit.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-TI-TRIPOD3

Fluke FLK-Ti-TRIPOD3 Tripod Mount Base Accessory/Holder for Fluke Ti200, Ti300, and Ti400 Thermal Infrared Camera Series

Manufacturer: Test Products International, Inc Brand: TPI Model: NC6GY Color: Gray

Nano Clip Kit. It includes 6 gray clips, 3 lead sets (3 black and 3 red), ground lead and hold bar. It can access 0.3mm pitch leads that allows you to attached the clip to a lead on the smallest of surface mount IC's for testing the input and/or output of the IC. Normal oscilloscope lead tips are too large and the probe handle is too heavy to access these leads. It ensure minimal signal loss and constant contact with highly conductive gold plating. High Durability with Fluorine Resin coated barrel extension: The barrel of the clip is fully insulated eliminating the chance of the clip shorting to adjacent nano clips, IC leads or components; Fluorine Resin if very rugged and will last the lifetime of the clip. Each nano clip set (excludes individual clips) comes with an exclusive hold bar that connects the clips to together while measuring multiple leads on the same IC. Hot and ground leads are included in each set (excludes individual clips) for easy connection between the nano clip and the tip of the oscilloscope probe. This allows the tip of the oscilloscope probe to be placed outside the measurement area so it does not interfere with the circuitry. Maximum Voltage: 25VDC. Maximum Amperage: 300mADC.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-CNX-v3000-KIT

The CNX v3000 AC Voltage Kit is part of the Fluke team of wireless test tools.Connect the CNX v3000 AC Wireless Voltage Module to your test point and view the results up to 20 meters away on the CNX Wireless Multimeter. You’ll save time with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems, use as a stand-alone measurement tool, or combine with other CNX modules as a system for multiple measurements. From short distances you can even view readings from modules through closed electrical panels.  Plus, using the optional PC adapter, there will be no more writing down data as the CNX remote modules capture up to 65,000 sets of time stamped min/max/avg readings. CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery with only the measurement module in harm’s way.Using the optional PC adapter, the CNX wireless troubleshooting system can track up to 10 measurement modules simultaneously with results sent to a PC for further analysis.Fluke CNX V3000 Kit includes Multimeter, Voltage Module, and accessories.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS410-II-R

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3024449

Fluke 4 phase mini current clamp set for power quality logger. 5A/50A Current.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3313059

Fluke Norma 4000 19-inches rack mount kit with handles.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3313067

Fluke Norma 5000 19-inches rack mount kit with handles.