Oscilloscope Accessories - Page 36

Manufacturer: Fluke Brand: Fluke Model: 4112745

Models covered: • Fluke 568 Infrared and Contact Thermometer • Fluke 568 Ex Intrinsically Safe Infrared Thermometer.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2650136

Fluke 400 AMP AC current clamp for 1750/B 3 Phase basic power recorder.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530855

Fluke sensor mounting pad. Used for 810 model handheld vibration tester.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3743

This kit has everything the CT3742 kit contains plus the addition of a switchable 2 position, 100 MHz oscilloscope probe. Kit is ideal for schools where accessories seem to disappear and replacements are commonly needed. Kit includes 1 coax adapter female-male-female tee, 1 oscilloscope probe x1/x10/R 100 MHz-HiPro, 1.2m, 1 BNC female adapter-4mm banana plugs black color, 1 BNC male cable assembly-RG-58 C/U, 40" length, black color, 1 BNC male terminator DC to 500 MHz, 50 ohm +/-1 percent, 1 cable, BNC-miniP Clips-50 ohm, 40" length, black color. 100 MHz bandwidth. Enhanced connector grade. 50 ohm impedance. Temperature range 0 to 80 degree C. 2002/95/EC RoHS compliant.

Manufacturer: LeCroy Corporation Brand: LeCroy Model: PP016

Recommended for WaveAce Series (200MHz) Oscilloscopes. Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MO. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input. Each passive probe is recommended for a certain oscilloscope. Bandwidth (probe only): 300 MHz/10 MHz. Input resistance: 10 MO/1 MO. Input capacitance: 12 pF/46 pF. Maximum input voltage: 600 V. Attenuation: 10:1/1:1. Coupling: AC 1 MO, DC 1MO, Ground. Operating temperature: 5 to 40 degree C (41 to 122 degree F). Humidity: 80 percent maximum from 5 to 31 degree C. Storage temperature: -20 to 70 degree C (-4 to 160 degree F). 2000 Meter maximum altitude. 5 Millimeter probe diameter. 1.2 Meter cable length. BNC Interface. Attenuation sense pin.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530819

The Fluke 810T noncontact tachometer attachment measures from 6 to 99,999rpm with accuracy to +/-0.05%, uses a laser beam, and has a 50cm cable. This noncontact tachometer is for with the Fluke 810 vibration tester, to measure the speed of motors, conveyor belts, and other moving and rotational systems. It measures from 6 to 99,999rpm with accuracy to + or - 0.05 percent. Its optical sensor is a laser beam that works at a distance of 1 to 100cm for user safety. Its integral 50cm cable connects the tachometer to the vibration tester for power and measurement data recording. It carries the CE mark to indicate compliance with applicable EU directives. This tachometer is suitable for measuring rotational speed in conjunction with vibration testing in mechanical or industrial engineering environments.Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachometers come with a range of attachments that can be used to measure speed on different kinds of rotary systems, which may include tips used for measuring shafts with a central hole or flat end surfaces, and rotary wheels for measuring conveyor belts. Noncontact tachometers take measurements from a distance using a beam of infrared light, and provide highly accurate measurements. Contact tachometers are an excellent choice for dirty and dusty environments; noncontact tachometers only calculate rpm but are considered safer because they do not require the operator to be in close contact with the moving surface. Contact/noncontact tachometers, also known as dual, or combination tachometers, can be used to take contact and noncontact measurements. Some tachometers can also take other types of measurements, such as count or frequency, while others can output data to a computer for analysis. Tachometers are used in applications such as automobile maintenance, mechanica...

Manufacturer: Fluke Corporation Brand: Fluke Model: PT12

Pitot tube for 922 airflow meter. Pressure sensitive to aid in measurement and data gathering. 12" Length.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530837

Fluke quick disconnect cable.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS510-R Color: Red

ScopeMeter Compact Probe for electronic applications, red, 10:1, 500 MHz, 300 V CAT III.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS420-R

Voltage probe set for Fluke ScopeMeter 190 Series II. Ruggedized high working voltage probe. 100:1 attenuation value. 150 MHz bandwidth. 1000V CAT III / 600V CAT IV, working voltage (voltage between probe tip and reference lead): 2000V CAT III / 1200V CAT IV. Red/black color.