Oscilloscope Accessories - Page 39

Manufacturer: Fluke Corporation Brand: Fluke Model: 3024692

Fluke LG cables for high current shunt.

Manufacturer: GW Instek Brand: GW Instek Model: GUG-001

GPIB to USB adaptor for GDS-3000 oscilloscope and PSW series programmable DC power supply

Manufacturer: Fluke Brand: Fluke Model: 4359389

Needed to perform 3- and 4-Pole Fall-of-Potential testing (Stake testing). Used with both the Fluke 1623-2 and Fluke 1625-2. Already included in the Fluke 1625-2 Kit.

Manufacturer: Fluke Corporation Brand: Fluke Model: SCC290

Full version of FlukeView software. Includes hard protective C290 carrying case for 190 series II ScopeMeters.

Manufacturer: Tektronix Brand: Tektronix Model: DPO2COMP

Computer Serial Triggering and Analysis Module. Enables triggering on packet-level information on RS- /UART buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3685

DSO active differential probe with 100x attenuation and voltage measurements up to +/-700V. Bandwidth to 50 MHz. Powered by 9V DC mains adapter. Applications include: precise power semiconductor device measurements, switching power supply design, precise measurement of power converters, precise measurement of motor derived. Features: Up to +/-700V differential. 50 MHz bandwidth (-3 dB). High accuracy +/-1 percent. Safety certified. Small size. Good CMRR. Accessories: Spring loaded hook probes, 9V DC adapter, manual. Reference SI-50. Bandwidth: 50 MHz. Attenuation(s): 100x. Accuracy: +/-1 percent. Rise Time: 7 ns. Input Impedance: 4 Mohm/7 pF. Input Voltage: Differential Voltage (DC+Peak AC): +/-700V or 600 Vrms. Common-Mode Voltage (DC+Peak AC): +/-1400V or 600 Vrms. Absolute Max. Voltage (DC+Peak AC): +/-1400V or 600 Vrms CAT II. Output Voltage: Swing: +/-7V (into 50 kohm load). Offset (Type): +/-1 mV. Noise (Type): 0.3 mVrms. Source Impedance (Type): 50 kohm. CMRR (Type): -90 dB at 60 Hz; -60 dB at 1 MHz. Operating Temperature/Humidity: -10 to +40 degree C / 25 to 85 percent RH. Storage temperature/humidity: -30 to +70 degree C / 25 to 85 percent RH. 125cm Cable length. 50cm Input leads length. 2002/95/EC RoHS compliant. Measures: 111mm length by 22mm width by 14mm height.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3684

DSO active differential probe with 10x attenuation and voltage measurements up to +/-70 V. Bandwidth to 50 MHz. Powered by 9V DC mains adapter. Applications include: precise power semiconductor device measurements, switching power supply design, precise measurement of power converters, precise measurement of motor derived. Features: Up to +/-70 V differential. 50 MHz bandwidth (-3 dB). High accuracy +/-1 percent. Safety certified. Small size. Good CMRR. Accessories: Spring loaded hook probes, 9V DC adapter, manual. Reference SI-50. Bandwidth: 50 MHz. Attenuation(s): 10x. Accuracy: +/-1 percent. Rise Time: 7 ns. Input Impedance: 1.6 Mohm/7 pF. Input Voltage: Differential Voltage (DC+Peak AC): +/-70V or 70 Vrms. Common-Mode Voltage (DC+Peak AC): +/-700V or 600 Vrms. Absolute Max. Voltage (DC+Peak AC): +/-700V or 600 Vrms CAT II. Output Voltage: Swing: +/-7V (into 50 kohm load). Offset (Type): +/-2 mV. Noise (Type): 0.7 mVrms. Source Impedance (Type): 50 kohm. CMRR (Type): -95 dB at 60 Hz; -60 dB at 1 MHz. Operating Temperature/Humidity: -10 to +40 degree C / 25 to 85 percent RH. Storage temperature/humidity: -30 to +70 degree C / 25 to 85 percent RH. 125cm Cable length. 50cm Input leads length. 2002/95/EC RoHS compliant. Measures: 111mm length by 22mm width by 14mm height.

Manufacturer: Fluke Corporation Brand: Fluke Model: I3000S

Fluke current clamps are the ideal tools to extend the current ranges of Fluke tools. The i3000s is a clamp-on AC current clamp for use with oscilloscopes and multimeters with banana input using the supplied dual banana to BNC adapter. The clamp is optimized for measurement on power distribution systems. Nominal current range: 30A, 300A, 3000A. Continuous current range: 1A - 30A, 1A - 300A, 1A - 3000A. Maximum non-destructive current: 4000A. Lowest measurable current: 1A. Basic accuracy: 2 percent + 2 A (48-65 Hz) (percent reading + floorspec). Useable frequency: 10 Hz - 100 kHz. Output levels: 10 mv/A, 1 mv/A, 0.1 mv/A. Maximum voltage: 600V. Maximum conductor diameter: 64mm. Output cable length: 2.1m.

Manufacturer: Fluke Corporation Brand: Fluke Model: L200

Small, rugged light easily attaches to any Fluke test probe. Bright white LED illuminates contact area. Frees both hands for work. 120 hours of battery life. Uses 2 3-volt watch batteries.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2648355

Fluke IR smart battery charger for thermal imagers.