Oscilloscopes & Accessories - Page 122

Manufacturer: Hantek Brand: MUW Model: MUWHT25COP-US

This coil-on plug and signal probe can catch the ignition waveform of automobile engine easily. The ignition waveform is a window, through which we can see what happened in the engine combustion chambers. It determines whether the ignition plug needs to be replaced or clean. Does fuel injector in electronic fuel injection system wok well? Is there any problem in the leakproofness of air cylinder? Does the gap between ignition plugs get larger? Does the electrode shape of ignition plug become sharp? Is there too much oil pollution or carbon deposition on the ignition plugs? Does the insulating property of ignition plug get worse? Is there any problem in the power supply system of storage battery? It can be used with normal oscilloscope. Special anti-interference design, high accuracy of measurement. Ergonomic design, can be arbitrary curved. Highlight LED which is convenient to operate at night or in dark condition. Directly measure on the ignition coil easily. Do not need to add extension cable It can be used with normal oscilloscope. Special anti-interference design, high accuracy of measurement. Ergonomic design, can be arbitrary curved. Highlight LED which is convenient to operate at night or in dark condition. Warning To avoid injury keep the probe away from moving parts, such as the alternator drive belt and cooling fans. To present electric shock do not use if the probe's sensor plate's insulation shows signs of damage. One Year Manufacturer Warranty

Manufacturer: Fluke Brand: Fluke Model: VPS41

VPS41 voltage probe set 40 MHz 600V cat IV VPS41, voltage probe set 40 MHz 600V cat IV. Works with the Fluke 120B Series portable oscilloscopes

Manufacturer: B&K Precision Brand: B&K Precision

All purpose demodulator probe, usable with most oscilloscopes. Features light weight design and 48" (1.2m) coaxial cable.100KHz to 950MHz Bandwidth +3dB Accuracy 200V Max input voltage 50VeffHF Voltage 250mV Actuating voltage 5pF Input capacitance Cable Length: 1.2 meters

Manufacturer: Probe Master Brand: Probe Master Model: 5905-1

Passive Voltage Probe, 500MHz, 10X, 600V, 3.5ft

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV200

' Infrared Window, Crystal Insert Size 50mm dia., Viewing Aperture Size 45mm dia., Window Thickness 2mm, NEMA Rating 4, 12, IP Rating 67, Gasket Maximum Temperature 232 Degrees C (450 Degrees F), Body Maximum Temperature 232 Degrees C (450 Degrees F), Optic Maximum Temperature 232 Degrees C (450 Degrees F), Voltage Range Any, Components CV200, ClirVu(R) Infrared Window, Body Material Zinc/Aluminum Alloy, Includes Hand Turn Door, Manufacturers Warranty Length Limited Lifetime '

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3290RA-PRO

One of cal test highest frequency passive probe at 500 MHz. This compact probe is an excellent replacement for probes used with high frequency scopes. Complete accessories supplied with this model. IEC rating: 300 V CAT II. RoHS (2002/95/EC) compliant. Attenuation: 10x. Input impedance: 10 mega ohms. Input capacitance: =8 pF. Output impedance : 1 M ohms. Risetime: 0.7 ns. Compensation: 8-18 pF. Cable length: 1.3 m. Readout actuator. Operating temperature: 0 degree to +50 degree C. Humidity: 85 percent RH or less (at 35 degree C).

Manufacturer: Fluke Brand: Fluke

Set of NiMH batteries designed for use with Fluke ScopeMeter 190 and 190C Series, as well as in the Fluke 430 Series. The battery pack has to be charged in the instrument. Features: Nominal Voltage: 7.2V Capacity: 3,500 mAh

Manufacturer: UNI-T Brand: UNI-T

1¡¢Dual analog channels width range 1mV/div~20V/div;2¡¢7 inches widescreen LCD displays;3¡¢Special Print Scree Feature;4¡¢Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;5¡¢USB drive system software upgrade;6¡¢Storage of waveforms setups and interfaces waveforms and setups reproduction;7¡¢Automatic measurement of 28 waveform parameters;8¡¢Unique waveform recording and replay function;9¡¢Multilingual menu displays.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-700BCW

This Fluke 700BCW barcode wand has an 8.2' (2.5 m) serial cable and can be used to scan and decode linear one-dimensional (1D) barcodes. The wand is made of polycarbonate and has a sapphire tip to resist scratches and wear. An LED indicator lights up to indicate a successful swipe. The serial cable connects the barcode wand to a computer or host system (not included) to transmit barcode data. The barcode wand is pen-shaped for comfort, weighs 5.7 oz., and measures 6-5/16" (160 mm) long and 7/8" (23 mm) in diameter. It is suitable for scanning Codabar, Code 11, Code 39, Code 93, Code 128, EAN-8, EAN-13, Interleaved 2 of 5, MSI, UPC-A, and UPC-E barcode symbologies.Barcode scanners, also known as barcode readers, can be used to scan and decode barcodes and to transmit barcode data to a computer or another host system. Barcode readers with a single-line laser can be used to scan linear, one-dimensional (1D) barcodes. Some lasers can produce light in an omnidirectional pattern to allow scanning of barcodes from different angles. Other barcode readers contain CCD (charge-coupled device) light sensors instead of a laser for accuracy and wear resistance. Barcode scanners with raster scanning, area imaging, and other scanning technologies can allow scanning of two-dimensional (2D) or Portable Document Format 417 (PDF417) barcodes, among other types. Some barcode readers provide onboard flash memory to allow the storage of barcode data before transmitting it to a computer or host system through a USB cable or wireless WLAN or Bluetooth connection. Many barcode readers have a handle for handheld use and come with a stand or a charging cradle for fixed position applications, while others are designed for stationary use on a counter or another flat surface. Some portable readers are small enough to be carried in a pocket or attached to a lanyard. Barcode readers are used at retail checkout counters and other points of sale (POS) locations and in warehouses and shipping facilities.Fluke Corporation manufactures electrical tes...

Manufacturer: Fluke Brand: Fluke Model: 4359377

Needed to perform 3-Pole Fall-of-Potential testing (Stake testing). Used with both the Fluke 1623-2 and Fluke 1625-2. This is a subset of what is included in the Fluke 1625-2 Kit.