Oscilloscopes & Accessories - Page 124

Manufacturer: Velleman, Inc Brand: Velleman Model: APS230

Adjustable trigger level and slope. Peak measurements: Max, min. And PK to PK. Measurements: rms, db(rel), dbv, dbm and dbg. Direct audio power measurements. x1 and x10 probe Calculation option. Several display modes. Stereoscope mode for audio measurement. X and Y position shift. Battery Pack included, fast charge possible.

Manufacturer: Owon Brand: OWON

The Owon SDS7102E is a 2+1 Channel Digital Storage Oscilloscope with 100 MHz bandwidth, 1 GS/s sample rate, and 8 inches (800x600) color TFT-LCD screen all in an ultra-thin body. Includes AutoScale function to simplify the operation. The Owon SDS7102E includes 2 probes, USB cable, software CD, probe adjust pen, power adapter and user manual.

Manufacturer: Hantek Brand: Hantek DSO4102C

General Introduction for DSO4000C series: 2 Channel Digital Oscilloscope.1 Channel Arbitrary/Function Waveform Generator. The Keys for osilloscope and waveform generator is seperated for convenient to operate it simultaneously. Oscilloscope:70MHz Bandwidth, 1GSa/s Sample Rate.25MHz Arbitrary waveform generator, 12 bits resolution,200MHz DDS,7 inch 64K color LCD display, Resolution 800x480. Parameters: *Model:DSO4072C 1.Oscilloscope *Sample Rate:Sampling Rate Range:1GSa/s;Equivalent Sample Rate:25GSa/s 2.Acquisition Modes *Normal:Normal data only *Peak Detect:High-frequency and randon glith capture *Average:Wavefom Average, selectable 4,8,16,32,64,128 3.Horizontal *Sample Rate Range:1GS/s *Waveform Interpolation:(sin x)/x *Record Length:40K *SEC/DIV Range:4ns/div to 40s/div 4. Vertical *Vertical Resolution:8-bit resolution,all channel sampled simultaneously *Bandwidth:70MHz *Rise Time at BNC(typical):5ns 5.Trigger System *Trigger Types:Edge,Video,Pulse,Slope,Over time, Alternative *Trigger Source:CH1,CH2,EXT,EXT/5,AC Line *Trigger Modes:Auto, Normal, Single 6.Signal Source Mode *Waveform Impedance:DC-25MHz *Sample Rate:200MHzDDS *Output Waveform:Arbitrary wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC *Frequency Resolution:0.1% *Waveform Depth:4KSa *Frequency Stability:＜30ppm

Manufacturer: Owon Technology Co., Ltd Brand: OWON

The Owon VDS3104 4+1 Channel Virtual Oscilloscope is an oscilloscope that can connect directly with PCs through a USB connection. Accommodates users with 100 MHz of bandwidth, 1 GSa/s real-time sample rate, and multiple trigger modes - edge, video, slope, pulse, and alternate. Its USB powering facilitates mobile tests under powerless conditions. The VDS3104 comes included with a power cord, software disc, 2 probes and an adjustment tool, usb cable, power adapter, silicon gel case, and a users manual. Multi-trigger option: edge, video, slope, pulse, and alternate USB isolation - less signal inference, more PC protection USB bus powering Ultra-thin body design, easy portability

Manufacturer: Hioki Brand: Hioki

Sensor Extension Cable for CM7290 10m.

Manufacturer: Hioki Brand: Hioki

Hioki CT7631 AC/DC Current Sensors (100A DC-10kHz) Hioki clamp on meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CT7631 is a 100 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 to capture instantaneous waveforms that can be output to a Hioki memory recorder or logger for further analysis. AC/DC Auto-Zero Current Sensor Frequency band: DC to 5 kHz Perform measurement without shifts in the zero-point, even during extended waveform recording or in locations where the temperature varies during measurement. AC/DC Current Sensor Frequency band: DC to 10 kHz Use to observe instantaneous waveforms and make short- term measurement in locations without temperature variations.   AC/DC Auto-Zero Current Sensors Take measurements without shifts in the zero-point, even during extended recording with temperature variations Normal Sensor × New Auto-Zero Sensor × Offset Current × Because measured values acquired using standard sensors exhibit shifts in the zero-point caused by temperature variations, their use in recording data over extended periods of time has required regular zero-adjustment. This issue is caused by the effects of the Hall elements used in the sensor's detection circuitry. Hioki's new auto-zero sensors feature a new, switching-based offset cancellation circuit that was developed to address this issue. This circuit minimizes shifts in the zero-point to enable extended recording without constant zero-adjustment.

Manufacturer: Fluke Corporation Brand: Fluke Model: SCC290

Full version of FlukeView software. Includes hard protective C290 carrying case for 190 series II ScopeMeters.

Manufacturer: Hioki Brand: Hioki

Hioki CT9691-90 100A AC/DC Clamp Sensor with Power Supply Hioki AC/DC clamp sensors are best-in-class current sensors for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT9691 and CT9691-90 with sensor unit attachment is a DC to 10kHz/100A sensor, ideal for capturing current signals from solar power generation systems, UPS and batteries. Note: To use the CT9691/ CT9692/ CT9693 sensor with the Hioki PW3198 Power Quality Analyzer or the Hioki Memory HiCorder series, it must be connected and powered via the Sensor Unit CT6590. Note: The CT9691/ CT9692/ CT9693 sensor may also be used with the Clamp on AC/DC HiTester 3290/ 3290-10 (without the Sensor Unit CT6590). Parts Name

Manufacturer: Zhangzhou Eastern Intelligent Meter Co. LTD Brand: all-sun Model: EM1230 Color: Blue

Your Wise Choice --- all-sun EM1230 Handheld Digital Oscilloscope EM1230 Handheld Digital Oscilloscope is a 25MHz digital storage oscilloscope, 6,000-count True RMS Digital Multimeter functions integrated multifunctional handheld instrument, ideal for field use. The main function. 2-channel, 25MHz digital storage oscilloscope True 6000 words RMS digital multimeter Features. 100MSa / s real-time sampling rate, 25MHz real-time bandwidth Automatic tracking measurement: automatic tracking based on external input signal to adjust the vertical amplitude \ horizontal time base and trigger stalls, without human intervention. Large dynamic measurement range: no extended probe leads directly measure range from 10mV/div to 500V/div Screen can display 4 measurement parameters. The user can choose RMS, peak, average, frequency, period .etc in more than 10 kinds of parameters as needed. Two kinds of cursor measurement mode selection. 320 * 240 dot TFT LCD Built-in battery, AC and DC Power adapter Recorder --- continuous track record up to 24 hours of event Standard USB interface, easily communicate with a computer for data analysis and test results archive through the PC software. Technical Specifications. See Display Pictures Package Checklist. Oscilloscope x1; 3.7V lithium battery x1; AC/DC Power Adapter x1; Oscilloscope Probes x 2; Multimeter Test Leads 2 (red, black); USB Cable x1; User Manual x1. PLEASE NOTE: Contact customer service: [email protected] if you have any questions or after-sale problem.

Manufacturer: Tektronix Brand: Tektronix Model: DPO2COMP

Computer Serial Triggering and Analysis Module. Enables triggering on packet-level information on RS- /UART buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time stamp information.