Oscilloscopes & Accessories - Page 37

Manufacturer: Zokop Brand: Zokop

Features: 1. New and high quality materials 2. Smooth surface is comfortable in hand feel 3. Solid structure and high strength 4. High sensitivity, excellent performance and reliable function 5. Injection molding ground wire to ensure its service life 6. Easy to operate 7. Low power consumption and energy-saving Specifications: 1. Model: P6020 2. Weight: 1.76oz / 50g 3. Cable Length: 38.98" / 99cm 4. Dimensions: (6.81 x 0.63)" / (17.3 x 1.6)cm (L x W) 5. Color: Gray 6. System Bandwidth: 1X: DC-6MHz; 10X: DC-20MHz 7. Input Voltage: 1X: ≤300VDC; 10X: ≤600VDC 8. Compensation Range: 15pF - 45pF 9. Input Capacitance: 1X:85pF - 135pF; 10X:18.5pF - 22.5pF 10. Input Resistance: 1MΩ/ 10MΩ 11. Attenuation Ratio: 1X/ 10X Conversion 12. Relative Humidity: ≤85% 13. Storage Temperature: -10℃ - 50℃ 14. Working Temperature: -20℃ - 75℃ 15. Rise Time: 1X: ≤58ns; 10X: ≤17.5ns Package Includes: 1 x Oscilloscope Probes 1 x Screwdriver 2 x Tip Locating Sleeves 6 x Marker Bands 1 x Manual

Manufacturer: Hantek Brand: Hantek

Useable with oscilloscopes having bandwidth up to 60 MHz, Modular Construction ,Coaxial Design with Coaxial Reed Switch, Accessory Pack included ,1 Screw driver ,8 Marker bands ,4 Tip locating sleeves ,2 Mini Alligator Clips and Ground leads ,2 Interchangeable Probe Clip Tips

Manufacturer: Fluke Corporation Brand: Fluke Model: TP2

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals. Hard stainless steel probe tips. 2mm diameter tip for electronics work. Also compatible with AC72 CAT IV 600V, CAT III 1000V, 10 A rating. UL listed. 1 Year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: TL175 Color: Black/Red

Twist Guard test leads offer adjustable length test tips for use in different measurement environments. Includes removable 4mm lantern tips that thread onto the lead tip. Fluke TL175 are the only test leads as tough as your meter. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement. Double Insulated Silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures. Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure. Universal input plugs are compatible with all instruments that accept standard 4mm shrouded banana plugs. Probes always show correct category rating for tip being used. Exposed probe tip length: 19mm to 4mm (0.75" to 0.16"). Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6,562'). Conforms to EN61010-031. 1 year warranty.

Manufacturer: Hantek Electronic Co.,Ltd Brand: hantek Model: PP 200

Useable with oscilloscopes having bandwidth up to 200 MHz, Modular Construction ,Coaxial Design with Coaxial Reed Switch, Accessory Pack included ,1 Screw driver ,8 Marker bands ,4 Tip locating sleeves ,2 Mini Alligator Clips and Ground leads ,2 Interchangeable Probe Clip Tips

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT2675A

General purpose series 200 MHz, 1x/10x switchable probe with additional REF switch position. The REF position grounds the input tip allowing for convenient trace leveling. 200 MHz (-3 dB) bandwidth. High impedance input (10 MO/14 pF - 10x position). 10-35 pF compensation range. 300 V CAT II. REF switch position. Snap-locking sprung hook. Easily replaceable tip. Large accessory set. Meets IEC 61010-031. RoHS compliant. Accessories included: 15 cm ground lead, replacement tip, black snap-on sprung hook, tip insulator, IC tip, BNC adapter, probe tip ground, trimmer tool and identifier rings. The high performance family is a high quality, general purpose set of 5mm passive voltage oscilloscope probes. They are excellent replacement probes for all makes and models of oscilloscopes. Type: 5 mm passive voltage. Bandwidth: 10/200 MHz. Attenuation: 1x/10x/REF. Input impedance: 1/10 mohm. Input capacitance: 90/14 pF. Output impedance: 1 mohm. Risetime: 35/1.8 ns. IEC rating: 300 V CAT II. Compensation: 10-35 pF. Cable length: 1.2 m. Operating temperature: 0 degree to +50 degree C. Humidity: 85 percent RH or less (at 35 degree C). RoHS (2002/95/EC) compliant.

Manufacturer: Hantek Brand: Hantek HT312

The LAN Interface PCB uses a High Impedance Transceiver (HIT) for signal transceiving in order to utilize a bus topology on the LAN. This board is factory installed on oscilloscopes as an optional interface and should require no futher connections to be made to it.

Manufacturer: Fluke Corporation Brand: Fluke Model: TP82

Flexible and formable 1-1/4" pin provides an easy connection past weather pack seals to connector conductors. Tested to over 60 VDC, these pins are a must-have for fuel injectors, TPS and MAP sensors, as well as for any underhood or under vehicle connector with weather pack seals. The bright yellow body stands out in an engine compartment to ensure they are not left behind. Easily connects to test leads that have removable ends. Banana jack accepts all DMM and banana jack leads.

Manufacturer: Fluke Corporation Brand: Fluke Model: TP82

Flexible and formable 1-1/4" pin provides an easy connection past weather pack seals to connector conductors. Tested to over 60 VDC, these pins are a must-have for fuel injectors, TPS and MAP sensors, as well as for any underhood or under vehicle connector with weather pack seals. The bright yellow body stands out in an engine compartment to ensure they are not left behind. Easily connects to test leads that have removable ends. Banana jack accepts all DMM and banana jack leads.

Manufacturer: Fluke Corporation Brand: Fluke Model: TP81

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. The TP81 connects to banana jack leads. Banana jack accepts all DMM and banana jack leads. Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead. For use with test leads with 4mm banana plugs. Tested to 60V DC.