Oscilloscopes & Accessories - Page 36

Manufacturer: Fluke Brand: Fluke Model: 4542273

The Fluke Series Battery Analyzer is ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications.

Manufacturer: Fluke Corporation Brand: Fluke Model: SCC190EFG

C190 Protective hard shell carrying case for 190 series ScopeMeter. OC4USB Optically isolated USB adapter/cable. SW90W/034EFG FlukeView software for Windows. English, French and German language.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-787CAL120

Fluke 787CAL120 USA Calibration Module The Fluke 787CAL module permits users and service facilities to perform automated MET/CAL verifications and calibrations of the Fluke 787 ProcessMeter. Application: The calibration module provides a 9 volt dc supply to the 787. At the same time, it facilitates RS232 communication from the PC running MET/CAL to the 787 over the battery leads of the 787. Note: An installation of MET/CAL Calibration Software plus appropriate calibration hardware must be provided by the user.

Manufacturer: Fluke Corporation Brand: Fluke Model: I3000S FLEX-36

The i3000s Flex is an ac current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas. Three ranges: 30A, 300A and 3000A, 1, 10 or 100 mV/A output. Ideal for current measurement on thick and hard to reach conductors without breaking the circuit. Maximum conductor diameter 178mm. CAT III 600V safety rating. Output sensitivity (AC-coupled): 100 mV, 10 mV, 1 mV per A. Load impedance: 100 kilo ohm minimum. Accuracy at +25 degree C: +/-1 percent of range (45 Hz to 65 Hz). Linearity 10 to 100 percent of range: +/-0.2 percent of reading. Noise: 8 mV AC rms (30 A), 2 mV AC rms (300A, 3000A). Frequency range: 10 Hz to 50 kHz (-3 dB). Phase error: less than +/-1 degree (45 Hz to 65 Hz), +/-10 degree (at 20 kHz). Position sensitivity with cable greater than 25 mm from the coupling: +/-2 percent of range. External field with cable greater than 200mm from the head: +/-1 percent of range. Power supply: 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply. Temperature Coefficient: +/-0.08 percent of reading per degree C. Working voltage: 600V AC rms or DC. Head circumference: 915mm. Head cable diameter: 14.3mm. Head bend radius: 38.1mm. Cable length (head to electronics): 2m. Output connection: 0.5m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter. Operating temperature range: -20 to +90 degree C (-4 to 190 degree F) (head), -20 to +85 degree C (-4 to 185 degree F) (electronics). Storage temperature range: -40 to +105 degree C (-40 to 221 degree F) (head), -20 to +85 degree C (-4 to 185 degree F) (electronics). Operating humidity: 15 to 85 percent (non-condensing).

Manufacturer: Rigol Brand: Rigol Model: DP821

Dual Output, 140 W Power Supply     Remote Controls Methods User-defined Programming You can program and control the instrument using the SCPI (Standard Commands for Programmable Instruments)   Send SCPI Commands via the PC Software You can control the power supply remotely by sending SCPI commands via the PC software (Ultra Sigma) provided by RIGOL.. SCPI Command Overview SCPI (Standard Commands for Programmable Instruments) is a standardized instrument programming language that is built upon the standard IEEE488.1 and IEEE 488.2 and conforms to various standards (such as the floating point operation rules in IEEE754 standard, ISO646 7-bit coded character for information interchange (equivalent to ASCII programming)). This section introduces the syntax, symbols, parameters and abbreviation rules of the SCPI commands. SCPI Status Registers All the SCPI instruments execute the status register operations in the same way. The status system records the various instrument states into three register sets: status byte register, standard event register and questionable status register sets. The status byte register records the advanced summary information reported by other register sets. The SCPI status systems of the DP800 series multi-channel models. Build Remote Communication You can build the remote communication between DP800 and PC over USB, LAN, RS232 or GPIB (option, can be extended via the USB-GPIB interface converter) interface.   OVERVIEW   The DP800 Series Power Supplies combine the ability to source, analyze, and coordinate over time in a powerful new package. The DP800 Series is a family of linear power supplies systems with 3 outputs and up to 195 Watts in total. With one channel isolated users can reconfigure instruments into any number of systems or applications

Manufacturer: Vetus Brand: Hantek Color: Grey

Feature 4 Channel Oscilloscope+8 Channel Logic Analyzer + 25MHz Arb. Waveform Generator(MSO5074FG). Abundant Trigger type: Video, Edge, Slope, Pluse Width, Overtime, Alternative, Code-type, Duration, Queue, Repeat trigger. Large 7 inch 64K color Display, WVGA: 800*480. USB host and device connectivity, standard. Ultrathin desigh, handy volume, easily portable. Oscilloscope 1Gsa/s Real Sample Rate; 4 Channels Oscilloscope; 70MHz Bandwidth, 1MRecord Length; 32 automotive measurement and FFT Analysis for Simplified Waveform Abalysis. Logic Analyzer 8 Channles Logic Analyzer; 500MHz Sample Rate 1MRecord Length Arb. Waveform Generator 25MHz Arb. Waveform Generator Output(Sine wave up to 75MHz) 200MSa/s Sample Rate; 12bit Pattern Generator 50MHz Frenquery Counter

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 2532B

The B&K Precision 2530 and 2540 series digital storage oscilloscopes (DSO) have advanced triggering, automatic measurements, FFT, and deep waveform memory for electronics applications such as product design and debugging, repair and servicing, and electrical engineering education. It has a vertical sensitivity to 10mV per division for the full bandwidth and to 2mV per division when the gain control is engaged for capturing low-level signals. An ALT triggering function displays the signal from both channels simultaneously and a hold-off function stabilizes complex signals. The 2530 series has 25 and 40MHz bandwidths with a single-channel sample rate of 500MS/s. The 2540 series has 60 and 100MHz bandwidths with a single-channel sample rate of 1GS/s. The oscilloscopes have USB, RS232, and LAN interfaces for connecting to a computer to view waveforms and readings, and collect data.The 2530 series additional specifications include a rise time of 8.8ns, and the 2540 series additional specifications include a rise time of 3.5ns. Educators can disable the Auto button that would automatically set up the scope to display a signal, requiring the user to learn how to set up scope parameters manually. The oscilloscope has a 5.7" color TFT-LCD with an internal 8 x 12 division grid for viewing waveforms.Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has continuous waveform display, typically in a luminous phosphor. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. Oscilloscopes may provi...

Manufacturer: Pico Brand: Pico

.da-1-4 { width: 23%; } .da-img { max-width: 100%; height: auto; margin: auto; } .da-ProdBody{ padding: 2%; margin: 0 auto; } .cr-list { list-style-image: url(/assets/1/7/850c3d3a3b4b40e68a2a2327508d61531.png); } .da-sm-img{ box-shadow: 1px 2px 3px #eeeeee; border-radius: 5px; } .da-sm-img:hover{ box-shadow: 1px 1px 2px 1px #aaa; transition: all 0.5s ease-in-out; } .da-overlay { position: fixed; top: 0; bottom: 0; left: 0; right: 0; background: rgba(0, 0, 0, 0.7); transition: opacity 50ms; visibility: hidden; opacity: 0; z-index: 1000; } .da-overlay:target { visibility: visible; opacity: 1; } .da-popup-img { margin: 70px auto; padding: 20px; background: #fff; border-radius: 5px; width: 50%; position: relative; transition: all 0.5s ease-in-out; max-width: 800px; } .da-popup-img h2 { margin-top: 0; color: #333; font-size:14px; } .da-popup-img .da-close { position: absolute; top: 0px; right: 10px; transition: none; font-size: 30px; font-weight: bold; text-decoration: none; color: #333; } .da-popup-img .da-close:hover { color: #888888; } .da-popup-img .da-content { max-height: 30%; overflow: auto; }

Manufacturer: Rigol Brand: Rigol Model: DM3058

The Model DM3058 DMM gives reliable, cost effective, full DMM capabilities measuring DCV, ACV, DCI, ACI, Resistance (2 & 4 Wire), Capacitance, Diode Test, Frequency, and Temperature. These DMMs are designed for simple and efficient bench top use, but include software options for datalogging and remote programming from almost any interface. The DM3058 is a great bench tool for basic, reliable measurements regardless of your application or need. A high quality digital tabletop multimeter of the DM3050 series with a sampling rate of max. 120 Sa/s. These Rigol multimeters have a very sophisticated and easy to use interface and provides plenty functions for all measurement tasks. The use of the menu navigation is very intuitional and the device will provide precise results in its many application areas. With the help of a computer you can perform long running monitoring tasks too. The LC-Display is with its 256x64 pixels easy to read and provides a very good overview over all features. The display has a resolution of 5½ digits (max. count 240.000). Math Function Max, Min, Average, Standard Deviation, Pass/Fail, dBm, dB, Relative Measurement and Vertical chart Double Display Mirror Image Configuration   Double Display function makes your measurements achieve maximum results with little effort. It can display two performances of a signal simultaneously instead of two multimeters or measurements in the past. All the configurations (system and sensor configuration) of DM3058 can be cloned into other DM3058 on product line via U-disc to improve work efficiency.   Preset Mode Pass/Fail   Based on Preset Mode, the worker operation on product line could be greatly simplified. Besides, 10 groups of Preset Configuration are available to be stored and recalled

Manufacturer: Owon Brand: OWON Model: HDS3102M-N

The Owon HDS3102M-N is a handheld electrical test device that combines a 100 MHz, two-channel, handheld digital oscilloscope for viewing electrical signals with a manual- and auto-ranging digital multimeter for measuring AC and DC voltage to 400V, AC and DC current to 10 amp, resistance to 40 MΩ, and capacitance to 100 μF. The oscilloscope has a maximum real-time sample rate of 500 MS/s and a record length of 6,000 points per channel for acquiring detailed waveforms. Its four math functions—add, subtract, multiply, and divide—plus FFT (fast Fourier transform) and 20 automatic measurements such as period, frequency, and peak-to-peak enable an in-depth analysis of waveforms. Up to four waveforms can be stored in the internal memory. The multimeter has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating range. The delta relative function allows a measurement to be set as a reference value and displays subsequent measurements as a positive or negative deviation from that value, and the data-hold function freezes a reading on the display to aid documentation. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. Additional specifications include a rise time of 3.5 ns and various triggering features. The unit has a 3.7" color TFT (thin film transistor) LCD with a resolution of 640 x 480 pixels for viewing waveforms and measurements. An oscilloscope is used for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. A multimeter is an electrical testing tool for measuring multiple properties of an electrical circuit to verify proper operation or diagnose problems.The unit has a USB host port and connection cable for storing data on a flash drive (sold separately), a USB device port and an RS-232 port for transferring data to a PC, and includ...