Oscilloscopes & Accessories - Page 62

Manufacturer: LeCroy Corporation Brand: LeCroy Model: WSXS-RACK

This rack mount accessory is compatible with WaveSurfer MXs-B and MSO MXs-B oscilloscopes.

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Sensor for Irradiation, Temperature and Inclination Sensor for measuring the irradiation, temperature and inclination angle of photovoltaic systems per VDE 0126-23/EN 62446. The sensor is connected with the test instrument via the terminal located at the PROFITEST PVSUN whereas the measured values are issued via the PROFITEST PVSUN display. Application Sensor for measuring the irradiation, temperature and inclination angle of photovoltaic systems per VDE 0126-23/EN 62446. The sensor is connected with the test instrument via the terminal located at the PROFITEST PVSUN whereas the measured values are issued via the PROFITEST PVSUN display.

Manufacturer: Hantek Brand: Hantek DSO

DSO8060 Five-in-one Handheld Oscilloscope. Oscilloscope/DMM/ Spectrum Analyzer/Frequency Counter/Arbtrary Waveform generator. High Bandwidth 60MHz Oscilloscope, and 6000 COUNTS high precision DMM. Seperated GND Reference. Hardware Frequency Counter. Arbitrary Waveform Generator: 25Mz arbitrary waveform output, (sine wave can deliver up to 75 Mz) 200 MSa/s DDS, 12 bits of vertical resolution. FFT , + , - , * , / ,X-Y, 22 kinds of auto measurements, PASS/FAIL Check, easy to use on production line. High refresh rate; High Real-time Sample Rate 150MSa/s-2GSa/s; 50GSa/s Equivalent-time Sample Rate. Multiform trigger mode, 2 separate time base in ALT trigger mode, easy to see 2 signal with different frequency. 1000 waveforms save and record. Excellent Industrial Design. Direct key for Each Channel, time base, Trigger and DMM, easy to operate. Large 5.7 inch TFT Color LCD Display, LED backlight, Display clearly. USB Host/Device 2.0 full-speed interface, support removeable disk, LAN Option; Easy to control by PC or long-distance. Battery Power Operation (Installed) Industrial Design. Save waveform in the following: jpg/bmp graphic file, MS excel/word file. Dimensions (mm):240(L)x165(W)x50(H), be carried easily. Labview\VB\VC Second Design instance.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540445

Fluke a clip-on current transformer. Measuring range selectable per software: 0.01 A to 1 A and 0.1 A to 10 A. Peak current for sinusoidal currents: 3.7 A and 37 A. Intrinsic error: 0.5 percent. Frequency range: 40 Hz to 10 kHz. Operating voltage: 300 V CAT IV. Phase error: 0.5 degree. Jaw opening: less-than 15-millimeters diameter or 15-millimeters by 17-millimeters bus bars.

Manufacturer: SIGLENT Brand: Siglent Model: SDS1202CNL+

SIGLENT SDS1202CNL+ Digital Oscilloscope is a compact desktop dual-channel digital oscilloscope with a 200 MHz bandwidth. 7-inch TFT color liquid-crystal display of the oscilloscope ensures bright and vivid waveform representation and backlit buttons ensure user comfort. SIGLENT SDS1202CNL+ has a multi-language user interface and online help. SIGLENT SDS1202CNL+ Digital Oscilloscope is a good choice for industrial control and measurements, R&D, electronic circuit design and testing and all other applications involving testing and troubleshooting, as well as education and training. Technical Specifications: Bandwidth 200 MHz Channels 2 + 1 ext. ch. Real time sample rate 2 GSa/s Equivalent sample rate 50 GSa/s Memory depth 18 Kpts Vertical sensitivity range 2 mV/div - 5 V/div Vertical resolution 8 bits Rise time ≤3.5 ns Time base range 2.5 ns/div - 50 s/div Input impedance 1 MΩ || 17 pF Cursor measurements Manual, Track, Auto measure Math Add, Subtract, Multiply, Divide, FFT Trigger modes Edge, Pulse, Video, Slope, Alternate Storage Internal: 20 setups, 20 waveforms (storage/recall), 2 reference waveforms External (USB): BMP, CSV, waveforms and setups Input coupling DC, AC, GND General Characteristics Display 7" (178 mm) TFT color LCD (480 × 234) Interface USB Host, USB Device, RS-232, P/F output Power source AC 100 ~ 240 V, 45 ~ 440 Hz, 50 VA Max Max. input voltage 1 MΩ 17 pF 400 V (DC + PK-PK) CATI, CATII Weight 2.5 kg Dimensions 305 × 133 × 154 mm Multi-language display (12 languages): English, French, Spanish, Portuguese, German, Italian, Russian, Arabic, Japanese, Korean, Simplified Chinese, Traditional Chinese

Manufacturer: Micsig Brand: Micsig

Overview: Micsig Handheld oscilloscope TO1102 is the hobbyists' favorite on line shop because of super cost effective. It uses double injection plastic mould making oscilloscope high IP level and giving you better handling experience; And it weighs light so that you won't feel tired to use it. Besides, exclusively detachable battery design makes you no any worry in field testing. What's worth mentioning that it uses 8 inches 800*600 pixels industry TFT LCD touch screen & supports button, touch and scroll wheels operation mode; Integrating scope, meter & recorder in one unit and unique scroll wheel & touch designs making handheld operation more convenient; Rapid response of operation system & online built-in helping menu making your testing work really easy & high efficient. Features:    •Model: TO1102    •Bandwidth:100MHz    •Input Channel: 2    •Sample rate: 1GSa/S    •Memory depth: 28Mpts    •Max capture rate: 80,000 wfm/s    •Bandwidth limitation: 20MHz, high pass, low pass    •Interface: Wifi, LAN, HDMI,USB Host, USB Device, GND, DC Power, Trigger out    •Screen 8 inches TFT LCD 800*600 pixels display resolution，14*10 display range    •Dimension: 250*210*55mm    •Battery: 8,000mAh Li-ion battery Package list: 1x TO1102 oscilloscope 1x Battery 1x Carry Strap 1x Screen Mask

Manufacturer: Micsig Brand: Micsig Model: TO202I

If you want to find a super cost effective digital oscilloscope, Tablet Oscilloscope tBook TO**I series are your first choice. As an oscilloscope hobbyist, it is absolutely what you can't miss. tBook redefines oscilloscope operation experiences; It'll perfectly measure and display waveform in your tablet oscilloscope with touching or sliding by finger gesture; Opening 31 auto measurements in one time; Saving waveforms in one shortcut icon; Swiping downward with three fingers to rapidly open ZOOM & with four fingers instantly to get a screenshot; Built-in 4GB hard disk, Supporting waveform to be viewed locally; Positioning waveform will rapidly be adjusted as the fingers move and all of those will bring you completely new oscilloscope experience. 200MHz bandwidth; 1GSa/s sample rate; Up to 3.6Mpts memory depth; Up to 50,000wfm/s capture rate; 2 or 4 input channels; 1024*600 pixels display resolution; 10.1 inches full touch capacitive screen.

Manufacturer: Micsig Brand: Micsig Model: MS420IT

Micsig Handheld oscilloscope MS400 series are the hobbyists' favorite on line shop because of super cost effective. It uses double injection plastic mould making oscilloscope high IP level and giving you better handling experience; And it weighs only 1.67KG so that you won't feel tired to use it. Besides, exclusively detachable battery design makes you no any worry in field testing. What's worth mentioning that it uses 5.7 inches 640*480 pixels industry TFT LCD & supports button, touch and scroll wheels operation mode; Integratig scope, meter & recorder in one unit and unique scroll wheel & touch designs making handheld operation more convenient; Rapid response of operation system & online built-in helping menu making your testing work really easy & high efficient. Micsig Handheld multi-functional oscilloscope includes oscilloscope, multimeter and recorder in one unit and has top quality and best price with below features: 1,5.7 inch TFT LCD touch screen and 640*480 high resolutions. 2, 200MHZ bandwidth model 3,1G real time sample rate ,240kpt memory depth . 4,Free Scopesuite PC Software, Support upgrade online and remote oscilloscope 5,31 types auto measurement in one page, you can choose any ones at one time just touch . 6:support indoor and outdoor display model 7: debugged Li-ion battery design 6000mAh Lion

Manufacturer: Hantek Brand: Hantek MSO5074FG

Specifications: 1.Horizontal •Model:MSO5074F •Bandwidth:70MHz •Channel:4 •Sampling Rate Range:1GSa/s •Memory Depth(Sample Points):1M •SEC/DIV Range:4ns/div-40s/div •Sampling Rate and Delay Time Accuracy:±50ppm in any ≥1ms time intervals 2.Vertical •A/D Converter:8-bit resolution,each channel sampled simultaneously •VOLTS/DIV Range:2mV/div-5V/div at input BNC •Position Range: ±400mV(2mV/div-20mV/div);±2V(50mV/div-200mV/div) ±40V(500mV/div-2V/div);±50V(5V/div) •Optional Analog Bandwidth LImit(typical):20MHz •Low Frequency Response(-3db):≤10Hz at output BNC •Rise Time:≤5ns •Vertical Gain Accracy: ±3% for sample or average acquistion mode,5V/div to 10mV/div ±4% for sample or average acquistion mode,5mV/div to 2mV/div 3. Trigger •Trigger Type:Video,Edge,Pluse Width,Slope,Overtime, Code-type,Duration,Queue,Repeat,Alternate •Trigger Sensitivity(Edge Trigger Type): •Trigger Level Range: CH1,CH2,CH3,CH4:±8 divisions from center of screen;EXT:±1.2V;EXT/5:±1.2V 4. Input •Input Coupling:DC,AC or GND •Input Impedance,DC coupled:1MΩ±2% for 20pF±3pF •Probe Attenuation:1X,10X •Supported Probe Attenuation Factor:1X,10X,100X,1000X 4. Logic Analyer •Sampled Channels:8 •Max.Input Impedance:200K(C=10p) •Input Voltage Range:0-3V •Logic Threshold Range:0-3V •Max.Sample Rate:500MSa/s •Sample Depth:1M 5. Arb.Waveform Generator •Frequency:DC-25MHz •DAC Clock:2K-200MHz adjustable •Waveform Resolution:0.1% •Depth:4KSa

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1587 T

The Fluke 1587 digital insulation multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter insulation resistance, current, voltage, and resistance for testing line insulation in telecommunications applications. The insulation test voltage settings of 50V, 100V measure resistance from 0.01 to 100 megohms. The meter also measures capacitance, frequency, and resistance. Temperature is measured using a K-type thermocouple (included). A diode test detects correct functioning of a circuit's diodes. A low-pass filter provides accurate AC voltage and AC frequency measurements on inverters and variable-frequency motor drives by blocking unwanted voltages. Live circuit detection increases user safety by preventing insulation tests when voltages exceed 30V, and auto-discharge of capacitive voltage increases user protection. An audible continuity sensor confirms a circuit conducts electricity. The LCD is backlit for readability in low light. A Hold function freezes the reading on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 20 minutes of nonuse to conserve battery life or can be disabled for extended readings, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter included a set of detachable test leads, a remote probe, alligator clips, a hard case, and instructions. This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The display has a 6,...