Oscilloscopes & Accessories - Page 65

Manufacturer: nLabs Brand: nLabs Color: Black

nScope is a USB-powered oscilloscope, function generator, and power supply that turns any laptop into an electronics workbench. We designed nScope around four basic principles:Easy Electronics can be easier. The startup cost for equipment is huge, even just probes for an oscilloscope can be prohibitively expensive for hobbyists. We wanted to change that. nScope plugs right into a breadboard, no need for special probes. It puts a dual power supply on the rails, no fussing with a bench supply. It runs on PC, Mac, and Linux, so just download the software, and build your electronics. Affordable Our goal is to provide accessibility to electronics, and this means that everyone should have a workbench. We've experimented for years, pouring over datasheets for hours looking to get the most out of each and every component we've used on the nScope. The result is a small and efficient design, providing impressive capability at a great price point. Safe Beginners in electronics are always worried about burning something up, or shorting the power supply. But even we experienced tinkerers appreciate the constant power supply monitoring. nScope automatically cuts power and notifies the user when too much current is pulled. Extendable What good would a tool be if it weren't hackable? It's why we're releasing nScopeAPI for C, python, and Matlab, and inviting you to use nScope to create anything and everything.

Manufacturer: Pomona Electronics Brand: Pomona Model: 6491

Featuring a new, compact, ergonomically designed probe handle, these modular general purpose passive voltage probes are ideal for use with a wide variety of oscilloscopes. They also feature a spring-loaded, pogo-pin replaceable tip. The fine tip probes are perfectly suited for probing high-density chip leads with less than 0.060in (1.52mm) spacing. Modular in design, the probe handle is capable of receiving a variety of spring-loaded and fixed tips, providing greater testing versatility. An affordable, versatile probe for many uses.

Manufacturer: Probe Master Brand: Probe Master Model: 4906-1KRA

Oscilloscope probe with readout actuator, 300MHz, 10X, 600V, 3.5ft, DELUXE KIT

Manufacturer: Fluke Corporation Brand: Fluke Model: 3460611

Fluke C-Range IR window for indoor medium voltage applications. Increase the safety and speed of electrical thermography. Inspect your indoor switchgear safely with the latest IR Window from Fluke. If you are concerned about arc-flash or electrocution risk, this latest C-Range IR Window can help increase the safety of your personnel and reduce the cost of predictive maintenance, in compliance with indoor switchgear codes. Impact resistant viewing pane compliant to ANSI C37.20.2 for indoor switchgear up to 72 kV. Certified by UL and CSA as suitable for Type 1 (Indoor) environment in North America, these C-Range windows are tested to withstand the long term aging effects of UV exposure. The Quadraband optic is IR-Fusion compatible, allowing the thermographer to see potential problems in visual light and thermographic mode. The CLKTO IR Window incorporates a revolutionary, impact resistant viewing pane compliant with indoor switchgear regulations C37.20.2. For the first time, your Fluke IR Window allows visual inspection of your switchgear even with the cover closed. Identification plate attached for unique, onsite numbering for rapid location confirmation and faster repairs. Each infrared window comes complete with a security access key, installation instructions and self-adhesive drilling template. Crystal insert diameter: 75-millimeters (2.96-inches). Viewing aperture diameter: 68-millimeters (2.7-inches). Viewing aperture area: 3632-millimeters square (5.63 square inch). Thickness: 2-millimeters (0.08-inches). Shortwave IR, Midwave IR, Longwave IR, Ultraviolet (UV) capable: Yes. Maximum temperature: Gaskets: 250 degrees C (482 degrees F), body: 659 degrees C (1219 degrees F), optic: 1400 degrees C (2552 degrees F). Viewing pane: 150 degrees C (302 degrees F). Gaskets: Low smoke and fume (LSF) compliant silic1. Pull-out strength: Up to 630 kg (1388 lb). Warranty: lifetime replacement against manufacturing defects.

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N4836A

The N4836A is a dual-lead adaptor for use with N2870A-76A 2.5 mm passive probes. The package contains two adaptors.

Manufacturer: Fluke Brand: Fluke Model: 4542299

Provides power cord operation and charging for Fluke Series Power Quality Analyzers.

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N2827A

The N2827A passive probe cable is for use with Keysight's N2820A 2-channel high-sensitivity current probe. Use this cable as a replacement for the secondary cable in the N2820A current probe. This cable cannot be used with the N2821A 1-channel high-sensitivity current probe.

Manufacturer: LeCroy Corporation Brand: LeCroy Model: PP010-1

Recommended for WaveJet(A) Series (

Manufacturer: Kuman Brand: Kuman Model: DS203 Color: DSO203

2016 NEWEST VERSION: The oscilloscope easily suffice common electronic engineering tasks. It's based on ARM cortex M3 (STM32VCT6), providing 72Mhz analog bandwidth with integrated FPGA and high speed ADC. Internal 8MB USB disk could be used to store waveform, user application and upgrade firmware. This is the newest version with the software upgraded to lib 2.25 app2.6 Feature: 3" 240 ¡Á 400 widescreen color TFT LCD screen 4 inputs & 4 tracks (Two 72Mhz analog channels and two digital channels) A custom waveform output (including the built-in sine, square, triangle) Built-in 2M USB disk 2 probe connectors Signal Generator; Auto Measurement;Various Triggering Option Open source Specification: Analog channel * 2:[CH_A] [CH_B] Digital channel * 2:[CH_C] [CH_D] Vertical Scale:20mV-10V/div (1-2-5 step) on x1 probe / 200mV -100V/div (1-2-5 step) on probe Vertical resolution:8 bit Input coupling:AC/DC Max input voltage:80Vpp (x1 probe) / 400Vpp (x10 probe) Storage:4K per channel / 8K on single channel Software trigger type:edge, pulse, level (to be added) Hardware trigger type:edge Trigger source:CH1/CH2/EXT Trigger mode:Auto, Normal, Single, SCAN, None Test Signal generater:10Hz to 8Mhz 2.8Vpp Square Wave, duty circle 10~90% adjustable / 10Hz to 20Khz 2.8Vpp Sin, Square, Saw, Triangle wave Storage:Build-in 2MB USB disk, BMP, DAT file Auto measure:Vmax, Vmin, Vpp, Vavr, Vrms, Freq, Period, Pulse, Duty Cursor measurement:Level, Voltage Display mode:CH1, CH2, EXT, CH1+CH2, CH1-CH2, CH1*CH2 Sampling mode:real time Sampling rate:30S/s - 72MS/s Power:950mAh build in battery Dimension:98 * 60 * 14.5 (mm) 355g Package Include: 1 x DSO203 2 x Probe 1x/10x 1 x Mini USB Cable

Manufacturer: Fluke Brand: Fluke Model: FLK-T3000 FC KIT

' Temperature Module, Wireless Temperature Monitoring, K Thermocouple, -328 Degrees to 2501 Degrees Temp. Range (F), Probe Connector Mini, Wire Length 3 ft., -200 Degrees to 1372 Degrees Temp. Range (C), Accuracy 0.50 Percent +/-0.5 Degrees C, For Use With FC 3000 Series Multimeter or PC3000 Series Adapter, Calibration Certificate Available Separately, Includes Bead Probe, Magnet Strap, Information Pack, Manufacturers Warranty Length 3 yr. '