Oscilloscopes & Accessories - Page 94

Manufacturer: Fluke Brand: Fluke Model: 4636967

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

The AC / DC current probes have been designed for reliable and accurate, contactless measurement of AC, DC and complex waveform currents. Their special characteristics make these current probes high-performance instruments for the measurement of inverters, switched-mode power supply units, industrial control systems and other applications which require current measurement or waveform analysis.

Manufacturer: Fluke Corporation Brand: Fluke Model: 80I-110S

The 80I-110s is compatible with any fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter. It also compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter. It is designed to provide you with safe, high accuracy measurements for a wide range of applications. The specially designed built-in safety features such as the 600 V rms rating at the input jaws, output cable, and BNC connector enhance work safety in industrial and commercial power distribution systems. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems. Safety rating: IEC 1010 and CSA-C22.2 No. 1010-1 installation category II, working voltage 600V. Output signal: 10A range: 100mV/A; 100A range: 10mV/A. Bandwidth: 1Hz to 20kHz. 10 A, AC/DC, 100 A, AC/DC Nominal current range. 0.1A - 10A AC/DC and 1A - 100A AC/DC Continuous current range. 140 A - 2 kHz Maximum non-destructive current. 3 percent + 50 mA (at 10 A) basic accuracy. DC - 100 kHz Useable frequency. 600 V maximum voltage. 9 V, 55 h battery life. 11.8mm conductor diameter. 1.6m output cable length. 1 year warranty.

Manufacturer: SIHLENT Brand: Subay

The Siglent SHS806 is a 60MHz handheld, two-channel digital oscilloscope for viewing electrical signals and has a 6,000-count multimeter mode for measuring AC and DC voltage. The oscilloscope has a real-time sample rate of 1GS/s and a record length of 2Mpts for acquiring detailed waveforms. Four math functions plus FFT (fast fourier transform), and automatic and cursor measurements allow an in-depth analysis of waveforms. Edge, Pulse, Video, Slope, and Alternative triggers allow isolation of specific signals. The oscilloscope's automatic triggering recognizes signal patterns and optimizes triggering, timebase and amplitude settings. The oscilloscope has a recorder that captures up to 18 hours of waveforms. Specifications Bandwidth 60MHz Channels Two Display 5.7" TFT-LCD (320 x 234 pixels) Power 100 to 240V power adapter, 7.4V 5000mAh battery pack Weight 1.5kg Dimensions (H x W x D) 260 x 163 x 53 mm H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. What's in the Box? SHS806 handheld oscilloscope (2) Oscilloscope probes (2) Multimeter probes Multimeter pen USB cable Power cord User manual Software

Manufacturer: Rigol Brand: Rigol Model: DS1074Z-S Plus

Rigol DS1074Z-S Plus 70 MHz Digital Oscilloscope       Best Selling Oscilloscope The DS1074Z-S Plus is a high quality 4 channel 70 MHz oscilloscope. Since it is an "S" model, it comes with a built in 2 channel 25 MHz signal generator. This scope also includes a 7" WVGA intensity graded color display for easy viewing. The DS1074Z-S Plus features an easily accessible source control button and 4 easy to access analog channel ports. With an industry leading 12 Mpts memory (upgradeable to 24 Mpts) and a waveform capture rate of up to 30,000 wfms/s, the DS1074Z-S Plus is a great solution for nearly any application. *Image shown is with Optional MSO Add-on Kit: RPL1116 DS1074Z-S Plus Features 70 MHz Analog Bandwidth Total of 4 Analog Channels Expandable to 16 total digital channels with optional upgrade Built in 25 MHz 2 Channel Waveform Generator Maximum Waveform Capture Rate of up to 30,000 wfms/s Includes 4 RP2200 150 MHz Passive HighZ Probes Low noise floor USB Host for Thumb Drive Large 7" Display 12 Mpts of Memory - upgradeable to 24     What makes the "Plus" so special? The new Rigol DS1074Z-S Plus now features a digital logic connection next to the USB port. Simply by purchasing the MSO Upgrade Package, users will now have the equivalent of Rigol's MSO scopes. This connection allows users to unlock an additional 16 digital channels on their oscilloscope. What does the "S" Mean? On all -S models in the DS1000Z series, Rigol has added a built in 2 channel 25MHz waveform generator. UltraVision Rigol's innovative UltraVision technology provides a deeper memory depth of 12Mpts standard and is upgradeable to 24 Mpts (with purchase of MEM-DS1000Z). The DS1074Z-S Plus also provides the ability to quickly focus in on certain piece of a recorded waveform

Manufacturer: Siglent Technologies Brand: Siglent Technologies Model: SDS1204CFL

The Siglent SDS1204CFL is a 200MHz, four-channel, digital storage oscilloscope with a 1GS/s per channel sample rate, a 12kpts per channel record length, and advanced triggers for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. It has Edge, Pulse, Video, Slope, and Alternative triggers and its math functions include FFT (fast fourier transform). Additional specifications include a rise time of 1.8ns and vertical sensitivity to 2mV per division for capturing low-level signals. Operating menus and help display in Simplified Chinese, Traditional Chinese, English, Arabic, French, German, Russian, Portuguese, Spanish, Japanese, Korean, and Italian languages. The oscilloscope has RS232 and USB ports for communication, and a 7" color TFT-LCD (480 x 234 pixels) with an internal 8 x 18 division grid for viewing waveforms.SpecificationsBandwidth200MHzChannelsFourDisplay7" color TFT-LCDPower100 to 240V, 50WWeight4.5kgDimensions (H x W x D)118 x 358 x 156 mmH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has continuous waveform display, typically in a luminous phosphor. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. Oscilloscopes may provide real-time intensity grading. Some oscilloscopes have the ability to adjust fr...

Manufacturer: Tektronix Brand: Tektronix Model: TDS2012C

Benchtop Oscilloscopes DIGITAL STORAGE 100 MHz 2 GS/s 2-Ch

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1630

Earth ground loop resistance measurements for commercial, industrial, and utility applications. The clamp-on ground testing technique used by the Fluke 1630 simplifies ground loop testing and enables non-intrusive leakage current measurement. The compact and rugged design makes the Fluke 1630 easy to use in small places and harsh environments, while the ‘display holdâ€TM and the continuity testing with an audible alarm function ensures convenience in use. The novel technique means that earth ground loop testing and continuity testing can be completed without breaking the circuit.

Manufacturer: Tektronix Brand: Tektronix Model: TCP0150

TCP0150 is a high performance and easy-to-use 150 A AC/DC current probe designed for use and direct connection to the TekVPI probe interface.

Manufacturer: Brand-new Brand: Brand-new

Specifications: Band Width: 100MHz Rise Time: 3.5ns Attenuation Ratio: 1X / 10X Input Resistance: (1MΩ/10MΩ)±2% Input Capacitance: 1X: 70pF-120pF 10X: 13-17pF Maximum Input: 1X: 200 Working Voltage(Vp-p) 10: 600 Working Voltage(Vp-p) Compensation Range: 10-35pF Operating Temperature: 0-50°C Operating Humidity: 0-80%RH Item Length: 14cm