Oscilloscopes & Accessories - Page 92

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-53-2 B 60HZ

The Fluke 50 Series II digital thermocouple thermometer is used for applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. This thermometer measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe. It comes with one or two Type K bead thermocouple probes with 40" cables that measure from -40 to +260 degrees C (-40 to +500 degrees F). It can store up to 500 points of data for analysis and monitoring, and it has an infrared communication port for exporting data to a computer for analysis. This thermometer provides the relative time of minimum, maximum, and average temperature measurements for monitoring. It has an offset function that allows the operator to compensate for thermocouple errors and increase accuracy. The thermometer body protects against splashing water and dust, and it comes in a holster that absorbs impact to help protect against damage if dropped. The thermometer enters sleep mode after 20 minutes of inactivity to help preserve battery life. It conforms to National Institute of Standards and Technology (NIST) standards for compliance with regulations. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives, and CSA mark indicates compliance with applicable Canadian Standards Association directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in industrial and manufacturing environments. Specifications Type K temperature range -200 to +1372 degrees C (-328 to +2501 degrees F) Type J temperature range -210 to +1200 degrees C (-346 to +2192 degrees F) Type T temperature range -250 to +400 degrees C (-418 to +752 degrees F) Type E temperature range -150 to +1000 degrees C (-238 to +1832 degrees F) Type N temperature range -200 to +1300 degrees C (-328 to +2372 degrees F) Type R and Type S temperature range 0 to 1767 degrees C (32 to 3212 de...

Manufacturer: SparkFun Brand: SparkFun

An oscilloscope can be a very handy instrument to keep on your workbench and this digital storage oscilloscope will help you take your circuit analysis and troubleshooting to the next level. This 2-channel, 100MHz digital scope has a 500 MSa/s real-time sampling rate and comes with everything you need to get up and running. Each of the two included probes features an attenuation switch which will limit the bandwidth to 10MHz. USB-host functionality allows the scope to save waveforms to any USB flashdrive and USB-device functionality (accessible via the USB-A port on the back) allows the scope to communicate with the included software so you can import waveforms and data to the computer as well as software-control the scope. The scope also supports PictBridge compatible printers. The color TFT display and on-screen menu system make it easy to access all of the features of the scope. 2-Channel, 100MHz 5.7" LCD Screen 500MSa/s Real-time Sampling Rate Edge, Pulse,Video, Slope and Alternative Trigger Functions Digital Filter and Waveform Recorder Functions Pass/Fail Function Save and Recall Setup/Waveform/CSV data on USB Flashdrive Save or Print Waveform Image Captures On-Screen Menu System RS-232 Connector PC Remote-Control with Included Software Input Voltage - 100-240VAC

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: 10073D

The Keysight 10073D passive probe is our most rugged 500 MHz probe. With a 10:1 attenuation ratio and high 2.2 M ohm input impedance, it is ideal as a general purpose, high bandwidth passive probe for the Keysight 300 MHz - 1 GHz 6000 series, 7000, 8000 and 9000 Series oscilloscopes. The probe identification feature automatically configures the oscilloscope for the probe attenuation. The following accessories are included: retractable hook tip; orange, white, blue and green identification tags; ground bayonet, IC probing tip, adjustment tool and an alligator clip ground lead. -Bandwidth: 500 MHz -System risetime (calculated):

Manufacturer: Hantek Brand: Hantek Color: 100MHZ

Note: Hantek DSO5102P Digital Oscilloscope is for 3 years Warranty！ Please read the instruction manual data CD carefully to avoid injury and prevent damage to this product.Specifications: Material: ABS Bandwidth: 70MHz / 100MHz (Optional) Plug Type: US Oscilloscope Probe Model: PP-80/150/200 Length of the Powerline: Approx. 150cm / 59.1in  Length of the USB Line: Approx. 107cm / 42.1in Length of the Probe Line: Approx. 130cm / 51.2in Size of the Oscilloscope Body: Approx. 31.5 * 13 * 15.2cm / 12.4 * 5.1 * 6.0in (L * W * H) Oscilloscope Weight: 2.00kg/ 4.4lb Sample Rate Range    500MS/s--1GS/s SEC/DIV Range    4ns/div to 40s/div Delay Time Accuracy    ±50ppm(at over any ≥1ms time interval) Position Range    20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s Sample interval = s/div ÷ 200 Position Range    2mV/div to 10V/div Bandwidth    100MHz Rise Time at BNC( typical)    3.5ns Trigger Source    CH1, CH2, EXT, EXT/5, AC Line Trigger Modes    Auto, Normal, Single Coupling Type    DC, AC, Noise Reject, HF Reject, LF Reject     Temperature    Operating: 32℉ to 122℉ (0℃ to 50℃); Nonoperating: -40℉ to 159.8℉ (-40℃ to +71℃) Cooling Method    Convection Humidity    +104℉ or below (+40℃ or below): ≤90% relative humidity; 106℉ to 122℉ (+41℃ to 50℃): ≤60% relative humidityPackage List: 1 * Digital Storage Oscilloscope 2 * Oscilloscope Probe 1 * Oscilloscope Powerline 1 * Hantek Data CD 1 * USB Line

Manufacturer: Hantek Brand: Hantek Model: DSO3062AL

General Description: 60MHz bandwidth; 2 channels oscilloscope; Models with many extra functions like arb. waveform generator, logic analyzer to select; USB 2.0 interface, LAN optional. Detailed Description: 8--36V wide range of input voltage, suitable for vehicle power test. USB 2.0 interface, LAN optional. More than 20 kinds of automatic measurement function, PASS/FAIL Check function, is suitable for engineering application. Excellent industrial design,similar interface with bench oscilloscope. Easy to use. Software support: Windows NT, Windows 2000, Windows XO, VISTA, Windows 7. Supply DEMO code(VC, VB, LABIEW) and technical support. Analog Channels-2 ,Arb. Waveform Generator-YES ,Logic Analyzer-YES

Manufacturer: Cal Test Electronics Brand: Elditest Model: CT4068-EU

Differential probes allow for safe, accurate measurements between two Voltage points where neither point is referenced to ground. CT4068-EU CT4068 features 10x/100x attenuation settings, 35 MHz bandwidth and ±800 V maximum Differential - all in a compact, Safety yellow housing. Compatible with oscilloscopes from all major manufacturers, the probe is ideal where high sensitivity and dynamic range is needed. Select either product modifier -EU for European Style power adapter or -NA for North American Style power adapter.

Manufacturer: Test Products International, Inc Brand: TPI Model: 440

The TPI 440 is a handheld electrical test device that combines a 1MHz, single-channel digital oscilloscope for viewing low-bandwidth electrical signals with a true RMS digital multimeter for measuring AC voltage to 750V, DC voltage to 1,000V, AC and DC current to 10 amp, resistance to 30MΩ, capacitance to 400μF, and frequency to 2MHz. The oscilloscope has a maximum real-time sample rate of 20MS/s and record length of 256 pixels for viewing industrial power signals such as motor controls, UPS, switching power supplies, and PLC controls. Spikes in signals can be found with the glitch capture trigger. The 4,000-count, true RMS (root mean square) multimeter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating range. The relative function allows a measurement to be set as a reference value and displays subsequent measurements as a positive or negative deviation from that value, and the record function captures maximum, minimum, and average values for parameter. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit’s diodes are working properly. The unit's component test checks voltage-current signatures on resistors, capacitors, and semiconductors, its logic test indicates transitions up to 2 MHz, and its frequency counter measures low-frequency signals from 1Hz to 2MHz, displaying duty cycle, pulse width, and period. Additional specifications include a sweep speed of 1μs to 1s and various triggering features. The unit has a 3" x 3" LCD with a resolution of 160 x 240 pixels that can simultaneously show a waveform and a reading, and has a backlight for visibility in low light. A multimeter is an electrical testing tool for measuring multiple properties of an electrical circuit to verify proper operation or diagnose problems.The unit operates on a rechargeabl...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-54-2 B 60HZ

The Fluke 50 Series II digital thermocouple thermometer is used for applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. This thermometer measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe. It comes with one or two Type K bead thermocouple probes with 40" cables that measure from -40 to +260 degrees C (-40 to +500 degrees F). It can store up to 500 points of data for analysis and monitoring, and it has an infrared communication port for exporting data to a computer for analysis. This thermometer provides the relative time of minimum, maximum, and average temperature measurements for monitoring. It has an offset function that allows the operator to compensate for thermocouple errors and increase accuracy. The thermometer body protects against splashing water and dust, and it comes in a holster that absorbs impact to help protect against damage if dropped. The thermometer enters sleep mode after 20 minutes of inactivity to help preserve battery life. It conforms to National Institute of Standards and Technology (NIST) standards for compliance with regulations. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives, and CSA mark indicates compliance with applicable Canadian Standards Association directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in industrial and manufacturing environments. Specifications Type K temperature range -200 to +1372 degrees C (-328 to +2501 degrees F) Type J temperature range -210 to +1200 degrees C (-346 to +2192 degrees F) Type T temperature range -250 to +400 degrees C (-418 to +752 degrees F) Type E temperature range -150 to +1000 degrees C (-238 to +1832 degrees F) Type N temperature range -200 to +1300 degrees C (-328 to +2372 degrees F) Type R and Type S temperature range 0 to 1767 degrees C (32 to 3212 de...

Manufacturer: GW Instek Brand: GW Instek Model: GDS-1102-U

The Instek GDS-1000-U series is a two-channel, portable digital oscilloscope with a maximum real-time sample rate of 250MS/s, a record length of 4 kpts, auto-set function, advanced triggering, two basic math functions and FFT, 19 measurement parameters, an internal memory for data storage, data logging, and USB connectivity for electronics applications such as such as product design, assembly lines, repair and servicing, and electrical engineering, among others. The sample rate and record length enable long capture times for displaying detailed waveforms. An auto-set function automatically configures the optimum settings for displaying waveforms by selecting the horizontal and vertical scales, positioning the waveform horizontally and vertically, and selecting and activating the trigger source channel. In addition to an edge trigger, the unit has pulse width and video triggers for isolating a specific signal. Two basic math functions—add and subtract—plus FFT (fast fourier transform) and 19 measurement parameters such as average, frequency, and peak-to-peak allow an in-depth analysis of waveforms. A go/no go test function promptly indicates when a signal falls outside user-defined settings, and a zoom function magnifies details of waveforms. Up to 15 waveforms or 15 setups can be stored in the internal memory of the oscilloscope. A data logging function tracks data at user-defined timed intervals for up to 100 hours, logging the data on a USB flash drive (sold separately). Additional specifications include a rise time of 7ns for the 50MHz model, 5ns for the 70MHz model, and 3.5ns for the 100MHz model, and various triggering features. The oscilloscope has a 5.7" color TFT (thin film transistor) LCD with a resolution of 320 x 234 pixels and can show simultaneously show up to two live and two stored waveforms. The oscilloscope has a USB host port for connecting a flash drive (sold separately) to store data and a USB device port for connecting to a PC for storing data and remote operation. The unit meet...

Manufacturer: GW Instek Brand: GW Instek Model: GDS-2072A

The GW Instek GDS-2000A series digital storage oscilloscope (DSO) has Waveform Search and Segmented Memory for electronics applications such as product design and debugging, repair and servicing, and electrical engineering education. It has a vertical sensitivity to 10mV per division for the full bandwidth and 1mV per division when the gain control is engaged for capturing low-level signals. The series has bandwidth range from 70 to 300MHz and two to four channels with a single-channel sample rate range of up to 2GS/s. Events captured and saved into Segmented Memory can be divided into 2,048 sections for observation, increasing memory usage efficiency. Waveform Search mode marks waveform sections that comply with a user-defined search condition and threshold level. Triggers include Edge, Pulse Width, Video, Runt, Slope, Alternate, Event-Delay, and Time-Delay. The oscilloscope has an 8" color TFT-LCD (800 x 600 pixels) with an internal 8 x 10 division grid for viewing waveforms. This digital storage oscilloscope is European Conformity (CE) approved and CAT I 300V safety rated.Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has continuous waveform display, typically in a luminous phosphor. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. Oscilloscopes may provide real-time intensity grading. Some oscilloscopes have the ability to adjust frequency of display. A constant image will display if a signal is shown at a high frequency. Oscilloscopes can be powered with batteries or...