Voltage Testers - Page 70

Manufacturer: Greenlee Brand: Greenlee Model: 2010

Greenlee 2010 Specifications:Voltage Measurement: AC V 24-1000Frequency: 50-500Hz Measurement Category: Cat III, 1000VGreenlee 2010 Includes:(1) 9V BatteryGreenlee 2010 Features:Bright LED and audible alarm if voltage is present. Fast, easy, non-contact voltage detection.Adjustable sensitivity.Identifies hot and neutral conductors.Checks individual breakers for power.

Manufacturer: Korins Inc. Brand: Korins Model: CRT3001A3 Color: Black

Features When the MyWatt WIreless Electricity Monitor SEM3000 series receives the data from a Transmitter, the power figure displayed is the total of all the power flowing through all CT Clamps connected to that transmitter. If you wish to see the individual readings, you will require a separate CRT3001 Transmitter and CT Clamp for each cable you wish to monitor. Specifications -Dimension: 111 x 68 x 42mm for transmitter; 55 x 40 x 70mm for CT Clamp; -Internal diameter of the CT Clamp: 25mm; -Electricity measuring accuracy: >97%; -Measuring current: 500mA-200A (each CT Clamp); -Voltage setting: 110VAC; -Transmittersample rate: 6s; -Transmitterrange 433MHz transmission range exceeds 30 meters at sight; -ElectricityMonitor power supply: 3pcs C type battery for transmitter;

Manufacturer: Fluke Corporation Brand: Fluke Model: 4026310

Fluke measurement cable set.

Brand: Open Source Meter Model: LOOP_CALB

The neXCalibrator is a portable calibrator designed for field calibration, testing, and troubleshooting of transducers, transmitters, actuators, and other process and control devices. Unit features a large, 0.59" (15 mm), LCD numerical display, with blue backlighting for use in dimly lit areas. Powered by a readily available standard 9V battery, it also comes with a 120V AC plug-in power supply for bench-top use.

Manufacturer: Yeeco Brand: Yeeco Color: Blue

Temperature gauge parameters: Display Dimension: 34mmx24mmx17.5mm Installation Dimension :30mmx21mm Refresh rate:about 300mS/times Power supply Voltage :DC7-30V Measuring temperature: 32- 257°F Measuring accuracy :0.108°F Overload is lees than 257°F Display color : blue Display ：three digits 0.36 "LED digital tube Sensor： DS18B20 Package includes: 1 X Digital Temperature Meter

Manufacturer: Zareba Systems Brand: Zareba Model: RSVT8

The Zareba 8-Light Voltage Tester checks the voltage of the fence line or the fence charger. This tester is designed for low impedance and standard duty fence chargers. Easy to use. Neon lights indicate voltage levels from 600 to 7,000 volts. To test fence line: Insert probe into ground and hook or touch tester to hot wire. To test fence charger: Touch probe to ground terminal and then touch metal hook to fence terminal. Highest blinking light indicates voltage level.

Manufacturer: Extech Brand: Extech Model: 381676A

Pen DMM with Non-Contact Voltage Detector Extech's pen-style digital multimeter featrues six functions including NCV detector and an auto ranging with rotary dial selector. Features Overview Large 2,000 count high contrast LCD display Non-contact voltage detection (50 to 600 VAC) with visible and audible alarm Auto power off, data hold, and range hold functions Measures AC/DC voltage (600 volts), resistance (20 MΩ), continuity and diode test Tip retracts for storage CAT III-600V safety rating What's in the Box Comes with test lead with alligator clips, two 1.5-volt AAA batteries, carrying case, and user manual. Applications: AC live circuit detectionField Service troubleshooting tool for AC/DC circuitsR&D and circuit board troubleshootingDigital circuitry testing

Manufacturer: Extech Brand: Extech Model: VT30 Color: Multicolor

View larger Multifunction Voltage Tester This voltage/continuity tester and flashlight is designed in a double-molded IP64 housing with large backlit LCD display and bargraph. Additional Features AC/DC voltage indication (0 to 480 VAC /0 to 690 VDC) with DC polarity Phase rotation test Low impedance test for eliminating ghost voltages CAT IV-600V CE approved What's in the Box Comes with two AAA batteries, protective cap, pouch case, and user manual.

Manufacturer: Extech Instruments Brand: Extech Model: DVA30

Detects and pinpoints wide range voltage and current with sensitivity adjust Current function detects live circuits through shielded wires, conduit and metal circuit breaker or junction boxes where voltage detectors cannot work Non-contact detection of AC voltage from 12VAC to 600VAC; detects AC Current from 200mA at 0.2" and larger current at greater distances Sensitivity adjustment increases or reduces sensor trigger threshold Dimensions / Wt: 7.6 x 1.2 x 0.9" (192 x 31 x 24mm) / 2.1 oz (60g) Audible and visual indicator of current or voltage What's Included: four LR44 button batteries and pocket clip.

Manufacturer: Amprobe Brand: Amprobe Model: 5XP-A

The Amprobe 5XP-A digital multimeter with built-in non-contact voltage detector is an average-sensing, manual-ranging meter for measuring current, voltage, and resistance in electrical testing applications. The meter comes with a set of detachable test leads that measure alternating current (AC) and direct current (DC) to 200 milliamp, AC voltage to 750 volts (V), DC voltage to 1,000V, and resistance to 20 megaohms. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in measurements. The battery test feature checks the amount of charge remaining in standard 1.5V and 9V batteries. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. The hold function keeps a reading on the display, even after the meter is disconnected. A low-battery indicator signals when the meter's batteries need to be replaced.This average sensing, or average responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is a manual-ranging meter and required the operator to choose the appropriate operating range for the property being measured. The meter has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category I installations up to 1,000V (which covers protected electrical equipment such as small household appliances), category II installations up to 600V (which covers large household appliances and devices connected to a fixed power supply, such as refrigerators and air conditioners), and category III installations up to 300V (which covers items used with enclosed buildi...