Temperature & Humidity - Page 48

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9092/001

The set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification. Cable length is 0.5m. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs.

Manufacturer: Suposun Brand: suposun

●Model:Suposun ●Display: LCD Screen with Backlight ●Measuring Temperature Range: -50℃- 850℃(-58℉-1562℉) ●Temperature Resolution: 0.1℃/0.1℉ ●Response Time: 0.15 sec. ●Emissivity: Adjustable 0.1-1.0 ●Field of View: D/S=12:1 ratio(D=Distance S=spot of laser) ●Diode Laser: Output < 1mW, Wavelength: 630-670nm, class 2 laser produce ●Spectral Response: 6-14um ●Power Off: Automatic shut off after 7 sec. ●Operating Temp.: 0℃- 50℃(32℉-122℉) ●Storage Temp: -10℃-60℃(14℉-140℉) ●Relative Humidity: 10%-90%RH;

Manufacturer: Fluke Corporation Brand: Fluke Model: L215

SureGrip kit with probe light and probe extender. L200 probe light. Tp280 20cm test probe extenders. TP220 SureGrip test probes. TL224 SureGrip silicon test lead set. Foldable soft pouch with six pockets and hook-and-loop.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: TS-13010 Color: Black, Red

The TS Digital Temperature Switch is designed to regulate many heating and cooling applications. Easy programming via the tactile front keypad enables quick setup of the 12 parameters for simple, reliable operation. The user can define set point, heating/cooling regulation, hysteresis, cycle time, ambient probe adjustment and defrosting time. The unit features error or alarm messaging and password protection. View probe temperature on the bright red, 3-digit LED display. Select between temperature display in °F or °C, and 110 VAC, 230 VAC, or 12 VDC power supplies. The Series TS includes a thermistor with 5 ft (1.5 m) cable, fitting clips for panel mounting, gasket, rear terminal cover, and instruction manual.

Manufacturer: Testo AG Brand: Testo Model: 0563 0104

The Testo 0563 0104 waterproof folding food thermometer is a triple-range digital thermometer for use in monitoring temperatures in liquid, semi-solid, and paste food products, and for diagnostic measurements in medical applications. It can be set to measure temperatures according to the Fahrenheit, Celsius, or Rankine scales. It measures temperature from -58 to +527 degrees F (-50 to +250 degrees C) with an accuracy of + or - 0.9 degrees F (+ or - 5 degrees C) from -22 to +211.82 degrees F (-30 to +99.9 degrees C) and + or - 1.8 degrees F (+ or - 1 degree C) outside this range. The folding stem-style probe has a thermistor sensor in the penetration tip for taking measurements while immersed in liquid or semi-solid substances. It records the minimum and the maximum temperature readings. The automatic data hold feature records the final temperature reading for later review and recording. The rubber-coated thermometer body provides non-slip handling. The unit operates on two AAA batteries and turns off automatically after 60 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. This thermometer is Ingress Protection certified IP65 for dust and penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. This thermometer is compliant with EN 13485 and Hazard Analysis of Critical Control Points (HACCP) standards. SpecificationsTemperature range-58 to +527 degrees F (-50 to +250 degrees C)Display resolution0.1 degree F (0.1 degree C)Accuracy+ or - 0.9 degrees F (+ or - 5 degrees C) from -22 to +211.82 degrees F (-30 to +99.9 degrees C) and + or - 1.8 degrees F (+ or - 1 degree C) outside this rangeResponse time10 secondsIP ratingIP65Standards metEN 13485, HACCPPower supply(2) AAA batteriesWeight2.82oz./80gDimensions (fully extended)1.34 x 8.46 x 0.75 inches (48 x 265 x 19mm) (H x W x D)H i...

Manufacturer: TitanOwl Brand: TitanOwl

Everything is ready to go, just switch on and connect the coil to heat up. Easy to connect to popular coils with DIN connector available in market. The range of temperature varies and depends on the type of coil, if you use K type it can go up to 1372C, with Cu50 Thermo Resistor up to 1500C. and with R coil up to 1768C, very easy to operate. Manufactured by TitanOwl

Manufacturer: REOTEMP Instrument Brand: REOTEMP Model: LL0901F69

Reotemp all-angle thermometer can be adjusted to almost any angle for flexible installation, 360 rotation, and 180 flex for easy temperature monitoring. All stainless steel welded construction. Standard external reset, easy to calibrate reset screw. Silicone fillable for vibration. Easy to read dial from any angle, standard glass lens. Corrosion resistant to most chemicals. 1/2" NPT Standard connection thread. 1/4" Standard stem diameter. Accuracy 1 percent full scale (ASME B40.3). Hermetically sealed (ASME B40.3). Made in the USA.

Manufacturer: Testo AG Brand: Testo Model: 0560 6053

Testo thermohygrometer with duct holder. Rugged humidity stick providing fast and accurate humidity, temperature wet bulb and dewpoint readings. Dewpoint calculation from -4 to 122 degree F. Testo's exclusive long-term, stable humidity sensor. Ideal for measurements in ducts. Easily read data from any angle with rotating display. Air moisture, air temperature and dewpoint. Storage temperature: -4 to 158 degree F. Battery type: 3 AAA batteries. Battery life: Approximately 1000 hours. Weight 2.7 oz. Measures 7" length by 1.5" width by 1.4" height. Probe type NTC. Measurement range 32 to 122 degree F. Accuracy: +/- 0.5 degree F. Resolution: 1.8 degree F. Probe type humidity sensor, cap. Measuring range 5 to 95 percent RH. Accuracy: +/- 3 percent RH. Resolution: 0.1 percent RH.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 16B-53

The Dwyer Love Series 16B 1/16 DIN panel-mount temperature and process controller has two output controls and a four-digit, dual-line LED. This controller accepts input from DC voltage, DC current, thermocouple probes, or RTD probes for controlling and monitoring industrial processes or temperature applications. Its two output controls allow direct or reverse dual loop control. The four-digit dual-line LED presents the process value in red and the set point in green, and indicates output status, engineering scale, auto tuning, and alarm status. It includes on/off, proportional-integral-derivative (PID), self-tune, and manual tune control methods as well as two configurable alarms and 13 built-in alarm functions. It can output data to a PC or PLC (programmable logic controller) via the RS-485 interface for analysis and process integration.The panel is Ingress Protection certified IP56 for protection against dust and water jets, and it conforms to 1/16 DIN size for industry-standard mounting. The European Conformity (CE) marking indicates compliance with applicable European Union directives, and it is compliant with Restriction of Hazardous Substances (RoHS) standards.SpecificationsInput sensor typesThermocouple: K, J, T, E, N, R, S, B, L, U, TXK3-wire platinum RTD: Pt100, JPt100Analog: 0 to 5V, 0 to 10V, 0 to 20 mA, 0 to 50 mVInput voltage100 to 240VAC 50/60 Hz or 24VDC (depending on model)Operation voltage range85% to 110% of rated voltagePower consumption5VA max.Control outputRelay output: SPDT (SPST: 1/16 DIN and 1/32 DIN size), Max. load 250 VAC, 5 amp resistive loadVoltage pulse output: DC 14V, Max. output current 40 mA. Current output: DC 4 to 20 mA output (Load resistance: Max. 600Ω)Linear voltage output: 0 to 5V, 0 to 10VCommunicationRS-485Standards metCE, RoHS, UL, cULWaterproofingIP56Weight4 oz./114 gH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dwyer Instruments manufa...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 16B-33

The Dwyer Love Series 16B 1/16 DIN panel-mount temperature and process controller has two output controls and a four-digit, dual-line LED. This controller accepts input from DC voltage, DC current, thermocouple probes, or RTD probes for controlling and monitoring industrial processes or temperature applications. Its two output controls allow direct or reverse dual loop control. The four-digit dual-line LED presents the process value in red and the set point in green, and indicates output status, engineering scale, auto tuning, and alarm status. It includes on/off, proportional-integral-derivative (PID), self-tune, and manual tune control methods as well as two configurable alarms and 13 built-in alarm functions. It can output data to a PC or PLC (programmable logic controller) via the RS-485 interface for analysis and process integration.The panel is Ingress Protection certified IP56 for protection against dust and water jets, and it conforms to 1/16 DIN size for industry-standard mounting. The European Conformity (CE) marking indicates compliance with applicable European Union directives, and it is compliant with Restriction of Hazardous Substances (RoHS) standards.SpecificationsInput sensor typesThermocouple: K, J, T, E, N, R, S, B, L, U, TXK3-wire platinum RTD: Pt100, JPt100Analog: 0 to 5V, 0 to 10V, 0 to 20 mA, 0 to 50 mVInput voltage100 to 240VAC 50/60 Hz or 24VDC (depending on model)Operation voltage range85% to 110% of rated voltagePower consumption5VA max.Control outputRelay output: SPDT (SPST: 1/16 DIN and 1/32 DIN size), Max. load 250 VAC, 5 amp resistive loadVoltage pulse output: DC 14V, Max. output current 40 mA. Current output: DC 4 to 20 mA output (Load resistance: Max. 600Ω)Linear voltage output: 0 to 5V, 0 to 10VCommunicationRS-485Standards metCE, RoHS, UL, cULWaterproofingIP56Weight4 oz./114 gH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dwyer Instruments manufa...