Temperature & Humidity - Page 50

Manufacturer: SHANGHAI QUALITYWELL Brand: Reed Instruments Model: 314FC-NIST

The REED surface thermometer is specifically designed to be used on horizontal or ferrous non-horizontal surfaces. It features two alnico magnets that act as the thermometer’s base and hold it in place on ferrous surfaces and the Bimetallic sensor is a specially processed alloy that is preconditioned and pretested for permanent calibration and maximum stability. The sensor is located in a draft shield and is in virtual thermal contact with the surface to be measured which means a relatively quick response time and it reaches sensing equilibrium (stability) within three minutes. It is designed for applications such as: hot plates; griddles; die-cast dies; foundry core boxes; annealing ovens; weld preheats; motors; generators; engines; bearings; boilers, tanks, and drums.

Manufacturer: M&A INSTRUMENTS INC Brand: M&A INSTRUMENTS INC Model: MC7825G

Application: Used for fast and accurate measurement of moisture in the process of allotment, acquisition, storage, machining of packed grains, feedstuff, powder. Features: * Able to measure grains up to 36 species. * Two presentations, digital display and color coded LED indication. * Use the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement. It can obtain automatically the temperature corrected moisture value. * Use "USB data output" and "RS-232 data output" to connect with PC. * Provide "Bluetooth TM data output" choice. Specifications: *Grains:36 Species *Measuring Range:6~30 % *Accuracy:Moisture: ±(0.5%n+1) *Resolution: 0.1 * Display: 4 Digits, 10 mm LCD, With Color Coded LED Indicator 1. Green LED represents a safe, air-dry state 2. Yellow LED represents a borderline state 3. Red LED represents a damp state *Calibration:Automation *Battery Indicator:Low Battery Indicator *Data Output:USB, RS-232, Bluetooth *Operating Conditions:Temperature: 0~50 %°C, Humidity: < 90 %RH *Power Supply:4 x 1.5 AAA Size (UM-4) Battery * Dimensions:Unit:165 x 62 x 26 mm; Sensor: 368 x 44 x 25 mm *Weight:334 g (Not Including Batteries) Standard Accessories: 1. Main Unit 2. Probe 3. Carrying Case 4. Operation Manual Optional accessories: 1. USB, RS-232C data cable with software 2. Bluetooth data out put with software

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: T197619

FLIR iSeries thermal imaging carrying case is rugged, protects your FLIR iSeries camera from damages and organizes your IR equiptment for the next use.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4015

The Thomas Traceable Total-Range Thermometer is used in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. The thermometer measures temperature from -200 to 1370 degrees C (-328 to 2498 degrees F), with an accuracy of + or -0.2 degrees C. The Type-K thermocouple probe is attached to the base with a four-foot cable. The thermometer has a minimum/maximum temperature memory and a 24-hour countdown timer for long-term monitoring and a hold feature to freeze the display and capture the current reading. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to measure temperature in industrial furnaces, kilns, and freezers SpecificationsPower source(3) AAA batteryTemperature range0 to 50 degrees C (22 to 122 degrees F)Temperature accuracy (-50 to 1000 C)+ or - 2 degrees CTemperature resolution0.1 degree C (-50 to 1000 degrees C), 1 degree outside this rangeStandard metInternational Organization for Standardization (ISO) 17025Weight8oz.Dimensions (H x W x D)7 x 3.25 x 1.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal pieces produces a voltage flow between the sensor end and the open end of each conductor, which can be used to determine the temperature. Different alloys are used for different temperature ranges. Thermocouple thermometers are used in applications that require a large temper...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 4B-23

The Series 4B 1/4 DIN Temperature/Process Controller is designed to accept thermocouple, RTD, current or voltage input and provide dual outputs for control. Available outputs include relay/relay, voltage pulse/relay, current/relay, or linear voltage/relay. The units can be programmed for ON/OFF, PID, auto-tuning, or manual tuning control methods. The PID control is supported by 64 ramp/soak actions. The Series 4B also includes two additional alarm outputs. The second relay output can be reconfigured as a third alarm output. The alarm type can be selected from 13 different preprogrammed alarm functions. The controller features dual LED displays for local indication of process and setpoint values.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 4B-33

The Series 4B 1/4 DIN Temperature/Process Controller is designed to accept thermocouple, RTD, current or voltage input and provide dual outputs for control. Available outputs include relay/relay, voltage pulse/relay, current/relay, or linear voltage/relay. The units can be programmed for ON/OFF, PID, auto-tuning, or manual tuning control methods. The PID control is supported by 64 ramp/soak actions. The Series 4B also includes two additional alarm outputs. The second relay output can be reconfigured as a third alarm output. The alarm type can be selected from 13 different preprogrammed alarm functions. The controller features dual LED displays for local indication of process and setpoint values.

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: PM180-02

The Dual-Cool is Cooper-Atkins' first dual temperature panel thermometer with interchangeable probes, Min/Max alarm settings and Hi/Lo temperature recall. Equipped with user adjustable settings, it can simultaneously measure temperatures within two separate storage environments or two locations inside of the same reach-in, walk-in or hot-holding cabinet. Includes two #2033 Air Probes to monitor the ambient air temperature. Available in three different kits including either two air probes (PM180-02), two solid simulator probes (PM180-03) or one of each (PM180-01), allowing both the ambient air and product temperature to be monitored with a single unit. A high volume audible alarm and jumbo LCD makes temperature monitoring easier than ever.

Manufacturer: Honeywell Brand: Honeywell

Honeywell model T675A1425 Remote Bulb Temperature Control. Spdt switching with 3-12F adjustable differential. Range 55-175 F. 20 Ft. Copper capillary tube length. Used to regulate temperature of air or liquids in ducts, pipes, tanks and boilers.

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: DL379B Color: Multicolored

The new DL379B offers two upgrades to our flagship clamp meter. We've added a dual NCV indicator which alerts to low voltage up to 24V and indicates high voltage above 24V. The DL379B is now rated CAT IV 300V/CAT III 600V instead of the previous CAT III 600V/CAT II 1000V, safely expanding its testing environment.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 4B-53

The Series 4B 1/4 DIN Temperature/Process Controller is designed to accept thermocouple, RTD, current or voltage input and provide dual outputs for control. Available outputs include relay/relay, voltage pulse/relay, current/relay, or linear voltage/relay. The units can be programmed for ON/OFF, PID, auto-tuning, or manual tuning control methods. The PID control is supported by 64 ramp/soak actions. The Series 4B also includes two additional alarm outputs. The second relay output can be reconfigured as a third alarm output. The alarm type can be selected from 13 different preprogrammed alarm functions. The controller features dual LED displays for local indication of process and setpoint values.