Airflow & Air Quality - Page 53

Manufacturer: Testo AG Brand: Testo Model: 0560 5128

The Testo 512 Series digital manometer/anemometer measures differential pressure and air velocity of non-corrosive gases for evaluation and maintenance of HVAC systems. The meter has an accuracy of + or - 1 digit or 0.5% of full scale. It measures air velocity in m/s and fpm, and pressure in kPa, hPa, Pa, mm H2O, mmHg, psi, inch H2O, inch Hg. The two-line LCD displays pressure and air velocity simultaneously. Min/max display provides comparative data, and the display hold retains last reading when the display cannot be seen during testing. An infrared interface provides connection to a printer to print test results (printer sold separately).SpecificationsPressure typesDifferential and air flowMedia typeNon-corrosive gasCase materialABSPressure unitskPa, hPa, Pa, mm H2O, mmHg, psi, inch H2O, inch HgFlow velocity unitsm/s, fpmDisplay2-line LCDAuto Off10 minutesWeight300gDimensions202 x 57 x 42mm (H x W x D)Power9V battery, 6F22H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are composed of columns of liquid, and they use gravity and the liquid's density to calculate pressure. Because they have no moving parts, analog manometers do not require re-calibration. Digital manometers have pressure sensors that are connected to a system with a hose to provide a digital readout of the amount of pressure present in a system. They use microprocessors to calculate pressure, and t...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1230-36-D

SERIES NO. 1230 MANOMETERS (wall mounting type), Have mounting holes for easy installation. They may also be used as portable manometers and can be hung or attached to any vertical steel surface by magnetic mounting clips. All parts are fully visible and readily accessible for cleaning.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1230-36-D

SERIES NO. 1230 MANOMETERS (wall mounting type), Have mounting holes for easy installation. They may also be used as portable manometers and can be hung or attached to any vertical steel surface by magnetic mounting clips. All parts are fully visible and readily accessible for cleaning.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 490-1

The Dwyer Series 490 wet/wet digital manometer provides positive and differential pressure measurements, and is used to balance hydronic heating or cooling loops, evaluate pump or chiller performance, and determine pressure head loss from valves and pipe reduction. The wetted parts are composed of 316L stainless steel (SS) for use with compatible gases and liquids. It has an accuracy of + or - 0.5% of full scale at 60 to 78 degrees F, and + or - 1.5% full scale at 32 to 60 and 78 to 104 degrees F. The extruded aluminum case provides durability. The backlit four-digit LCD displays the pressure measurement. User-selectable measurement units include inH2O, ftH2O, bar, mbar, psi, inHg, mmHg, and kPa. Field-adjustable damping provides display averaging as it corresponds to fluctuation level. The unit can store up to 40 readings for later recall, and audible and visual alarms indicate out-of-range measurements. The zero function nulls minor pressure differences before measuring, and display hold retains last reading when the display cannot be seen during testing. The meter is powered by a 9V battery (included) and automatically shuts off after 20 minutes to preserve battery life. SpecificationsPressure typesPositive and differentialWetted partsType 316L SSMedia typeLiquid and gasCase materialExtruded aluminumPressure unitsinH2O, ftH2O, bar, mbar, psi, inHg, mmHg, kPaDisplayFour-digit LCDCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline batteryAgency approvalsCEH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressur...

Manufacturer: FLIR Systems Brand: Extech Model: CO210

The CO210 is a desktop indoor air quality CO2 monitor/datalogger that datalogs up to 5333 points (Carbon dioxide, air temperature or humidity).

Manufacturer: Wohler Brand: Wohler Model: DM2000

The Wohler 7006 DM2000 portable differential manometer has + or - 800.00 inches WC measuring range and 0.01 resolution, and is used to troubleshoot and balance HVAC systems, including measuring draft and differential pressure in gas line and manifold applications. The accuracy is the greater of + or - 3%, or + or - 0.02 inches WC. An IrDA provides data output to an IrDA-compatible device (sold separately). It is powered by two AA batteries (included) and includes a 5ft. hose. SpecificationsPressure typesDifferentialMedia compatibilityGas line and manifoldPressure range+ or - 800.00 inches WCAccuracyGreater of + or - 3%, or + or - 0.02 inches WCResolution0.01 inches WCEngineering unitsWCData outputIrDAPower requirementsTwo AA batteriesDimensions6.6 x 2.2 x 2.1 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are composed of columns of liquid, and they use gravity and the liquid's density to calculate pressure. Because they have no moving parts, analog manometers do not require re-calibration. Digital manometers have pressure sensors that are connected to a system with a hose to provide a digital readout of the amount of pressure present in a system. They use microprocessors to calculate pressure, and they require periodic calibration to help ensure accuracy.What's in the Box?Wohler DM2000 differential manometer5 ft. hose(2) AA batteriesInstructions

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 490-6

The Dwyer Series 490 wet/wet digital manometer provides positive and differential pressure measurements, and is used to balance hydronic heating or cooling loops, evaluate pump or chiller performance, and determine pressure head loss from valves and pipe reduction. The wetted parts are composed of 316L stainless steel (SS) for use with compatible gases and liquids. It has an accuracy of + or - 0.5% of full scale at 60 to 78 degrees F, and + or - 1.5% full scale at 32 to 60 and 78 to 104 degrees F. The extruded aluminum case provides durability. The backlit four-digit LCD displays the pressure measurement. User-selectable measurement units include inH2O, ftH2O, bar, mbar, psi, inHg, mmHg, and kPa. Field-adjustable damping provides display averaging as it corresponds to fluctuation level. The unit can store up to 40 readings for later recall, and audible and visual alarms indicate out-of-range measurements. The zero function nulls minor pressure differences before measuring, and display hold retains last reading when the display cannot be seen during testing. The meter is powered by a 9V battery (included) and automatically shuts off after 20 minutes to preserve battery life. SpecificationsPressure typesPositive and differentialWetted partsType 316L SSMedia typeLiquid and gasCase materialExtruded aluminumPressure unitsinH2O, ftH2O, bar, mbar, psi, inHg, mmHg, kPaDisplayFour-digit LCDCompensated temperature limits32 to 104 degrees F/0 to 40 degrees CDimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)Power9V alkaline batteryAgency approvalsCEH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressur...

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM200LS-DN2000

The Meriam M200LS-DN2000 Lab Standard digital manometer has a non-isolated differential sensor to compare the pressure between two sources. The meter has a measuring range of 0 to 2000 inches of water. NIST traceable accuracy of + or - 0.01% includes all effects of linearity, repeatability, hysteresis, and temperature from 59 to 86 degrees F (15 to 30 degrees C). The 1/8" female NPT connection is composed of 316L stainless steel and brass parts and has Viton O-rings for use with clean, dry, non-corrosive gases. Engineering units include inches of water, psi, mm of Hg, inches of Hg, mbar, bar, kPa, kg/cm2, cm of H2O, and user-selectable scaling. The meter can be field-recalibrated for zero, span, and linearity with one- or five-point calibration. Leak test feature allows users to view Min/Max pressure values and calculate the leak rate per minute in pressure units when pressure testing pneumatic systems. Exponential damping has a user-selectable time constant from 0.1 to 25 seconds to minimize the effect of pulsating pressures.The keypad has a sealed membrane to protect the instrument from contamination, and five dome contact-style buttons to ease operation. The two-line LCD shows 5 significant digits, and has contrast adjustment for use in a variety of lighting situations. The two-stage backlight provides visual indication of over-range measurements. The display can read out in any of eleven pressure units, or can be linearly scaled for user-selectable scaling. The meter has a square root flow function to display flow rate in user-defined units. An adjustable damping feature minimizes the effects of pulsating pressures. A Min/Max function captures the extremes of pulsating or varying pressure signals, and a Hold function freezes the display at any point of interest. Auto Record retains up to 240 readings for future recall. The meter has automatic shut-off at user-selectable times of 10, 20, 30, 45 or 60 seconds to extend battery life. The polycarbonate case is permanently static dissipative to provide ESD protec...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1235-24-D

Dwyer 1235 series well-tube type manometer uses red gauge fluid, or mercury or green color concentrate to provide direct reading of positive, negative, and differential pressure measurement for determining velocity and static pressures, leakage, fan and blower efficiency, filter resistance, and gas pressures. The manometer is calibrated in inH2O or mmH2O using water and is available in W/M-style for use with fluorescein green concentrate or mercury (sold separately), or D-style for use with red gauge fluid. The water column has 1/10" divisions for inch scales or 2mm for metric units. The scales have a positive mechanism to speed adjustments. Units are silkscreened in black on a white background to ease reading, and sealed with mylar to resist wear. Well assemblies are machined from solid acrylic plastic for durability and are permanently bonded to shatterproof clear plastic tubing to provide leak-proof joints. Visible wells and glands allow operators to inspect the manometer, and overpressure traps prevent fluid loss. The manometer has magnetic clips to mount on vertical surfaces and a clamp bar to prevent slipping. Magnets are removable to customize mounting.SpecificationsPressure typesStatic, vacuum, and differentialMedia typeAir and gasWetted parts materialAcrylic plasticCase materialVinyl tubingScaleInches of water, inches of mercuryFluid typeRed or green gauge fluid, or mercuryConnection1/8"MountMagnetic clipsMaximum pressure100psi, intermittentlyMaximum vacuum5 inHg (10 inHg absolute), intermittentlyMaximum temperature130 degrees FH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of press...

Manufacturer: Extech Instruments Brand: Extech Model: PS101-NIST

Differential pressure manometer that features a 1psi measurement range. This product is NIST Certified which indicates that the product is traceable to standards provided by the National Institute of Standards and Technology (NIST).