|
|
-
4.1 of 5.0 with 47 Reviews
SALE PRICE: $243.97 5% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 616WL-12-LCD
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 616WL-12-LCD
The Series 616WL Differential Pressure Transmitter senses very low pressures of air and non-combustible, compatible gases and sends a standard 4-20 mA output signal. All models, including those featuring the 3 digit LCD digital read-out, are factory calibrated to specific ranges as listed in the chart below. Positive, negative and differential pressures can be measured within a full span accuracy of ±0.50%. This weatherproof unit is enclosed in a polycarbonate case, designed to meet (IP66/NEMA 4X). Internal digital push button zero and span allow for quick and simple field calibration.
-
4.1 of 5.0 with 37 Reviews
SALE PRICE: $260.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 121-AA-00-O(AA)
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 121-AA-00-O(AA)
Mid-West Instrument piston type differential pressure gauge. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). One reed switch in NEMA 4X/IP65 plastic enclosure with terminal strip (1/2-inches FNPT conduit connection). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 15-95 percent).
-
4.1 of 5.0 with 25 Reviews
SALE PRICE: $260.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 121-AA-00-O(AA)
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 121-AA-00-O(AA)
Mid-West Instrument piston type differential pressure gauge. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). One reed switch in NEMA 4X/IP65 plastic enclosure with terminal strip (1/2-inches FNPT conduit connection). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 15-95 percent).
-
4.1 of 5.0 with 48 Reviews
SALE PRICE: $450.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 142-SA-00-OO
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 142-SA-00-OO
|
Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Over range protection to full rated working pressure. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Five year limited warranty. Total separation of high and low pressures by a Convoluted Elastomer Diaphragm. Sensor magnetically coupled to the indicating pointer and optional switches. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Two times rated working pressure at ambient temperature. 316 Stainless steel body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings.
-
4.1 of 5.0 with 18 Reviews
SALE PRICE: $553.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 4616B
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 4616B
|
The Dwyer Capsuhelic series 4000 differential pressure gauge with a brass case has a circular 4" (100 mm) dial, and four female 1/4" NPT rate connections, and measures pressure with a single scale in inch water column (WC), psid, or kPa with a display accuracy of + or – 3 or 4%. The forged brass case is for measuring air and compatible gases and water-based liquids. The circular dial is 4" in diameter and measures pressure with a single scale in inch water column (WC), psid, or kPa. The pressure being measured is held within a capsule in the gauge, which permits the use of the gauge on system pressures of up to 500 psig, even with differentials less than 0.1 in WC. The gauge accuracy is + or - 3% of full scale at 70 degrees F (21.1 degrees C) with + or - 4% of full scale on some models. The pressure limits are -20" Hg. to 500 psig. The temperature limit is 20 to 200 degrees F (-6.67 to 93.3 degrees C). Four female connections with 1/4" NPT (National Pipe Thread) rate provide for vertical mounting of the gauge. The connections are paired with one high and low pressure pair of taps on top for air and gas and one high and low pressure pair on bottom for liquids. This gauge is suitable as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks, and other applications involving pressure, vacuum, or differential pressure. The gauge comes with two 1/4" NPT plugs for duplicate pressure taps, four flush mounting adapters with screws, and four surface mounting screws.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relati...
-
4.1 of 5.0 with 15 Reviews
SALE PRICE: $679.00 1% OFF
Manufacturer: Bac-Flo Unlimited, Inc
Brand: Bac-Flo Unlimited, Inc.
Model: BAC-FLO-5
Manufacturer: Bac-Flo Unlimited, Inc
Brand: Bac-Flo Unlimited, Inc.
Model: BAC-FLO-5
Only test kit with Official laminated USC 10th edition test procdures. Industry best 5-year warranty, full 1-year certification and Made in USA. Gauge body is made of rigid thermoplastic. Comes ready to use.
-
4.0 of 5.0 with 11 Reviews
SALE PRICE: $40.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Manufacturer: Dwyer Instruments
Brand: Dwyer
From our inventory we are selling a Dwyer 1900 G1910-1-GC Pressure Switch 1A 125VAC. Specifications: Model #: G1910-1-GC More Information: Max Pressure 45 IN W.C. Surge Pressure 10 PSI Max Temperature 110F-43C 14AWG 1A 125VAC Vertical Diaphragm
-
4.0 of 5.0 with 5 Reviews
SALE PRICE: $58.10 1% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 50676857
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 50676857
|
The WIKA differential low pressure gauge has a circular dial that is 4" in diameter and is enclosed in a thermoplastic case with a polycarbonate window for increased durability in low temperature environments. The gauge measures pressure from 0.02 to 50 inch water column (inWC) and is accurate to + or - 3 percent of span over the entire range of the gauge. The female connection is a hosed barb that is made of plastic for increased durability. The gauge can be mounted and dismounted easily without the use of tools. The low pressure gauge is suitable for measuring differences of pressure in isolation chambers and for monitoring blowers and ventilators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards...
-
4.0 of 5.0 with 21 Reviews
SALE PRICE: $69.95 1% OFF
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
Manufacturer: Dwyer Instruments, Inc.
Brand: Dwyer
2025, Dwyer Instruments, Inc., 0-25 Magnehelic Diff. Pressure Gauge
-
4.0 of 5.0 with 28 Reviews
SALE PRICE: $71.00
Manufacturer: DWYER
Brand: Dwyer
Manufacturer: DWYER
Brand: Dwyer
ONE-TOUCH DIFFERENTIAL PRESSURE TRANSMITTER, W.C:0-10", VOLTS:20-28 VAC OR 16-35 VDC, MAX PRESSURE:2 PSIG, PORTS:2, WARM UP TIME:30 MINUTES, DIMENSIONS:3-1/4"H X 2-1/2"W X 1-1/8"D, WEIGHT:2.0 OUNCES, IN BAGS, MADE IN USA
|
|