Differential Pressure Gauges - Page 31

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 120-SA-00-OO

Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers and for local flow indication and control. Five year limited warranty. Two times rated working pressure at ambient temperature. 316 Stainless steel body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending).

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 4002B

The Dwyer Capsuhelic series 4000 differential pressure gauge with a brass case has a circular 4" (100 mm) dial, and four female 1/4" NPT rate connections, and measures pressure with a single scale in inch water column (WC), psid, or kPa with a display accuracy of + or – 3 or 4%. The forged brass case is for measuring air and compatible gases and water-based liquids. The circular dial is 4" in diameter and measures pressure with a single scale in inch water column (WC), psid, or kPa. The pressure being measured is held within a capsule in the gauge, which permits the use of the gauge on system pressures of up to 500 psig, even with differentials less than 0.1 in WC. The gauge accuracy is + or - 3% of full scale at 70 degrees F (21.1 degrees C) with + or - 4% of full scale on some models. The pressure limits are -20" Hg. to 500 psig. The temperature limit is 20 to 200 degrees F (-6.67 to 93.3 degrees C). Four female connections with 1/4" NPT (National Pipe Thread) rate provide for vertical mounting of the gauge. The connections are paired with one high and low pressure pair of taps on top for air and gas and one high and low pressure pair on bottom for liquids. This gauge is suitable as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks, and other applications involving pressure, vacuum, or differential pressure. The gauge comes with two 1/4" NPT plugs for duplicate pressure taps, four flush mounting adapters with screws, and four surface mounting screws.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relati...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2-5010

Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DM-2013-LCD

The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range.

Manufacturer: Sierra Instruments, Inc. Brand: Sierra Instruments, Inc. Color: White, Black

Specifications -Most gases; check compatibility with wetted materials -Accuracy: +/- 1.5% of full scale -Repeatability: +/- 0.5% of full scale -Nylon version to 50 slpm (nlpm) maximum -Aluminum version to 175 slpm (nlpm) maximum -Stainless-steel version 500 slpm (nlpm) maximum -Response time: 800ms time constant -Pressure: Stainless-steel version to 500 psig (34.5 barg) maximum; Aluminum and Nylon versions to 150 psig (10 barg) maximum -Gas/ambient temperature 32 to 176°F (0 to 80°C), all versions -15 VDC, 24 VDC power supply -Wetted materials: 10% glass-filled Nylon® 6/6; 316 stainless-steel -Seals: Viton, Neoprene, Kalrez, Teflon -Analog signals included: 4-20 mA; 0-5 VDC -CE approved

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 140-SA-00-O(EA)

Mid-West Instrument diaphragm type differential pressure gauge. Over range protection to full rated working pressure. Weather resistant construction standard. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Proof pressure: two times rated working pressure at ambient temperature. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. 316L Stainless Steel body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings. One reed switch in NEMA 4X/IP66 aluminum enclosure, division 2 hazardous locations (2)(3). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 15-90 percent).

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DM-2007-LCD

The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range.

Manufacturer: Ashcroft Brand: Ashcroft

Gauge is ideal for use where ambient corrosion is a concern. Designed with stainless steel case and ring that offers excellent resistance to chemical, weather, and corrosion attack. Features 4-1/2" dial for differential low-pressure applications. This listing is for each. Technical Specification Differential Pressure Gauge Type Differential Pressure Gauge Item Differential Pressure Gauge Gauge Nominal Dial Size 5 Basic Gauge Case Material Plastic Basic Gauge Wetted Parts PTFE / Buna-N Differential Gauge Connection Type FNPT Differential Gauge Connection Size 1/8 Gauge Connection Location Back and Side Differential Pressure Range Units In. H2O Differential Pressure Range Value 0 to 20 Gauge Accuracy +/-3.00% Body Material Glass Filled Nylon Gauge Primary Range Smallest Graduation 0.5 Diaphragm Material Buna-N Piston Material PTFE Seal Material Buna-N Gauge Operating Temp. Range 0 Degrees to 140 Degrees F Rated Total Pressure 35 psi Dial Material Stainless steel Scale Type Pressure Includes Instructions Manufacturers Warranty Length 5 yr.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DM-1111

The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.

Manufacturer: Cecomp / API Brand: Cecomp / API

Technical Specification Item Differential Pressure Gauge Differential Pressure Range 0 to 8 H20 Rated Total Pressure -20 Hg to 15 psi Connection Size 1/8 NPT Dial Size 3-3/4 Body Material Die Cast Aluminum Scale Type Pressure Accuracy +/-2% Dial Material Die Cast Aluminum Diaphragm Material Silicone Rubber Ambient Operating Range 20 Degrees to 140 Degrees F Includes Instructions, (2) 1/8 NPT Plugs, (2) 1/8 NPT to 3/16 I.D. Rubber Tubing Adapters, (3) Mounting Adapters with Screws Manufacturers Warranty Length 2 yr. This listing is for each.