|
|
-
3.7 of 5.0 with 2 Reviews
SALE PRICE: $242.48 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 616D-6B
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 616D-6B
The Series 616D Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The 616D housing is specifically designed to mount on a 35 mm DIN rail in a panel. This mounting style allows for several units to be mounted closely together reducing required space. A wide range of models are available factory calibrated to specific ranges. The span and zero controls are for use when checking calibration. They are not intended for re-ranging to a significantly different span. Versatile circuit design enables operation in 2-wire current loops.
-
3.7 of 5.0 with 46 Reviews
SALE PRICE: $247.95
Manufacturer: Cecomp / API
Brand: Cecomp / API
Manufacturer: Cecomp / API
Brand: Cecomp / API
Technical Specification Digital Differential Pressure Gauge Type Digital Differential Pressure Gauge Item Digital Differential Pressure Gauge Gauge Nominal Dial Size 5 Basic Gauge Case Material Plastic Basic Gauge Wetted Parts Plastic Differential Gauge Connection Type Smooth Barb Differential Gauge Connection Size 13/64 Gauge Connection Location Back Differential Pressure Range Units In. H2O Differential Pressure Range Value -40 to 0 to 40 Digital Gauge Accuracy +/-1.00% Display LED Number of Display Digits 3 Case Material Glass Filled Nylon Digital Gauge Display Units in. H2O, cmH2O, mmH2O, kPa, Pa Powered By 24 to 240VAC/DC, 50/60 Hz Gauge Operating Temp. Range -10 Degrees to 140 Degrees F Includes Instructions, Panel Mount Gasket, Panel Mounting Screw Kit Manufacturers Warranty Length 2 yr. This listing is for each.
-
3.7 of 5.0 with 9 Reviews
SALE PRICE: $260.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 121-AA-00-O(AA)
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 121-AA-00-O(AA)
Mid-West Instrument piston type differential pressure gauge. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). One reed switch in NEMA 4X/IP65 plastic enclosure with terminal strip (1/2-inches FNPT conduit connection). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 15-95 percent).
-
3.7 of 5.0 with 11 Reviews
SALE PRICE: $265.00
Manufacturer: Dwyer Instruments
Brand: Dwyer
Manufacturer: Dwyer Instruments
Brand: Dwyer
From our online store inventory, we are selling a Dwyer Mercoid DRW-33-2L-1 Brass Bourdon Tube Pressure Switch 0.125-15PSIG. Specifications: Model #: DRW-33-2L-1 More Information: Pressure Range: 0.125 to 15 PSIG Housing: Flanged with Bottom Connection Contacts: 1 NC, SPST Reset: Manual Reset Increase Pressure Bourdon Tube Material: Brass Switch Type: Tilt Enclosure: Weatherproof Enclosure Rating: NEMA 3S, 4, 4X
-
3.7 of 5.0 with 32 Reviews
SALE PRICE: $265.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 120-SA-00-OO
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 120-SA-00-OO
Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers and for local flow indication and control. Five year limited warranty. Two times rated working pressure at ambient temperature. 316 Stainless steel body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending).
-
3.7 of 5.0 with 46 Reviews
SALE PRICE: $281.92 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 616D-2
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 616D-2
The Series 616D Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The 616D housing is specifically designed to mount on a 35 mm DIN rail in a panel. This mounting style allows for several units to be mounted closely together reducing required space. A wide range of models are available factory calibrated to specific ranges. The span and zero controls are for use when checking calibration. They are not intended for re-ranging to a significantly different span. Versatile circuit design enables operation in 2-wire current loops.
-
3.7 of 5.0 with 3 Reviews
SALE PRICE: $285.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 140-AC-00-OO
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 140-AC-00-OO
|
Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Over range protection to full rated working pressure. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Five year limited warranty. Total separation of high and low pressures by a Convoluted Elastomer Diaphragm. Sensor magnetically coupled to the indicating pointer and optional switches. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Two times rated working pressure at ambient temperature. Aluminum body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings.
-
3.7 of 5.0 with 48 Reviews
SALE PRICE: $389.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 4000-15CM
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 4000-15CM
|
The Dwyer Capsuhelic series 4000 differential pressure gauge with an aluminum case has a circular 4" (100 mm) dial, and four female 1/4" NPT rate connections, and measures pressure with single scale in inch water column (WC), mm WC, cm WC, psid, or kPa with a display accuracy of + or - 3 or 4%. The die-cast aluminum case with impregnated hard coating is for measuring air and compatible gases and oil-based liquids. The circular dial is 4" in diameter and measures pressure with a single scale in inch water column (WC), mm WC, cm WC, psid, or kPa. The pressure being measured is held within a capsule in the gauge, which permits the use of the gauge on system pressures of up to 500 psig, even with differentials less than 0.1 in WC. The gauge accuracy is + or - 3% of full scale at 70 degrees F (21.1 degrees C) with + or - 4% of full scale on some models. The pressure limits are -20" Hg. to 500 psig. The temperature limit is 20 to 200 degrees F (-6.67 to 93.3 degrees C). Four female connections with 1/4" NPT (National Pipe Thread) rate provide for vertical mounting of the gauge. The connections are paired with one high and low pressure pair of taps on top for air and gas and one high and low pressure pair on bottom for liquids. This gauge is suitable as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks, and other applications involving pressure, vacuum, or differential pressure. The gauge comes with two 1/4" NPT plugs for duplicate pressure taps, four flush mounting adapters with screws, and four surface mounting screws.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another referenc...
-
3.6 of 5.0 with 41 Reviews
SALE PRICE: $15.25 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-497
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: A-497
|
The Dwyer A-497 surface mounting bracket is used to surface mount the Dwyer Minihelic II differential pressure gauge (not included). Pre-drilled holes ease installation. The steel bracket has a black satin finish for durability. Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to a reference measurement. Gauge pressure measures the pressure of something relative to ambient air. For example, a tire pressure gauge or a blood pressure gauge measures the air in a tire or blood flowing through veins relative to ambient air. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, for example, an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and they display results on a dial with varying increments of measure across a given range.Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. The company, founded in 1931, is headquartered in Michigan City, IN.
-
3.6 of 5.0 with 46 Reviews
SALE PRICE: $19.75 1% OFF
Manufacturer: uxcell
Brand: uxcell
Manufacturer: uxcell
Brand: uxcell
This magnetic base is convenient and flexible, can adjust any direction and location.When you do the processing, measuring and testing, it can be fixed flexibly in any part of the machine tool ,all you need to do is to pull the knob tight. With high stability, it will be your ideal tool in the measurement of precision piece field.Â
|
|