|
|
-
3.6 of 5.0 with 46 Reviews
SALE PRICE: $122.81 1% OFF
Manufacturer: Cecomp / API
Brand: Cecomp / API
Manufacturer: Cecomp / API
Brand: Cecomp / API
Technical Specification Item Differential Pressure Gauge Differential Pressure Range 0 to 30 H20 Rated Total Pressure -20 Hg to 15 psi Connection Size 1/8 NPT Dial Size 3-3/4 Body Material Die Cast Aluminum Scale Type Pressure Accuracy +/-2% Dial Material Die Cast Aluminum Diaphragm Material Silicone Rubber Ambient Operating Range 20 Degrees to 140 Degrees F Includes Instructions, (2) 1/8 NPT Plugs, (2) 1/8 NPT to 3/16 I.D. Rubber Tubing Adapters, (3) Mounting Adapters with Screws Manufacturers Warranty Length 2 yr. This listing is for each.
-
3.6 of 5.0 with 19 Reviews
SALE PRICE: $133.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DM-2004
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DM-2004
The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range.
-
3.6 of 5.0 with 2 Reviews
SALE PRICE: $133.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DM-2002
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DM-2002
The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range.
-
3.6 of 5.0 with 21 Reviews
SALE PRICE: $133.00 1% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DM-2005
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: DM-2005
The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range.
-
3.6 of 5.0 with 47 Reviews
SALE PRICE: $139.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 120-AA-00-OO
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 120-AA-00-OO
Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers and for local flow indication and control. Five year limited warranty. Two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending).
-
3.6 of 5.0 with 19 Reviews
SALE PRICE: $145.50 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 105-FE-00-OO
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 105-FE-00-OO
|
Mid-West Instrument bellows type differential pressure gauge. Model 105 System pressure is applied to the internal volume of a bellows and mechanical linkage assembly. As pressure changes, the bellows and linkage assembly move to cause an electrical signal to be produced or to cause a gauge pointer to move. The major components are a two-piece body, multiple diaphragm/bellows sensing element and over-pressure assembly, a torque tube assembly, a range spring and the gauge front assembly. The body halves provide the pressure containment function. They also clamp the sensing element and over-pressure assembly between the halves, isolating the high side and low side pressures of the system. The high side body half also provides a mount for the torque tube assembly and the gauge front assembly. Model 105 assembly incorporates a bi-directional relief valve which provides over-pressure protection in both directions. When over-pressured from the high side, the valve is opened by a mechanical stop as the sensing element deflects to its maximum travel. When over-pressured from the low side, the spring-loaded valve opens when the differential pressure exceeds its maximum rating. The opening of the valve in either direction equalizes the pressure and protects the unit. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT top and bottom connections, 6-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-1 percent full scale (ascending). Shatter resistant acrylic lens.
-
3.6 of 5.0 with 30 Reviews
SALE PRICE: $147.50 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 122-AC-02-OO
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 122-AC-02-OO
Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers and for local flow indication and control. Five year limited warranty. Two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT end connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending).
-
3.6 of 5.0 with 43 Reviews
SALE PRICE: $160.89 1% OFF
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 351130FD25S60#
Manufacturer: Ashcroft Inc.
Brand: Ashcroft
Model: 351130FD25S60#
The Type 1130 uses a piston design where small migration of the process media is permissible.
-
3.6 of 5.0 with 23 Reviews
SALE PRICE: $162.50 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 122-AA-02-O(MA)
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 122-AA-02-O(MA)
Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT end connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending). One reed switch (clamp-on). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 10-100 percent).
-
3.6 of 5.0 with 19 Reviews
SALE PRICE: $164.00 1% OFF
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 120-AC-00-OO
Manufacturer: Mid-West Instrument
Brand: Mid-West Instrument
Model: 120-AC-00-OO
Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers and for local flow indication and control. Five year limited warranty. Two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending).
|
|