Differential Pressure Gauges - Page 43

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DM-1105

The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 251130FD25S30#

The Type 1130 uses a piston design where small migration of the process media is permissible. It is recommended for high differential and high static pressures, up to 6000 psi.Body materials are available in Aluminum, Brass and Stainless Steel, with Buna, Viton or EPDM seals. 5-year warranty.

Manufacturer: Ashcroft Brand: Ashcroft

Gauge is ideal for use where ambient corrosion is a concern. Designed with stainless steel case and ring that offers excellent resistance to chemical, weather, and corrosion attack. Features 4-1/2" dial for differential low-pressure applications. This listing is for each. Technical Specification Differential Pressure Gauge Type Differential Pressure Gauge Item Differential Pressure Gauge Gauge Nominal Dial Size 5 Basic Gauge Case Material Plastic Basic Gauge Wetted Parts PTFE / Buna-N Differential Gauge Connection Type FNPT Differential Gauge Connection Size 1/8 Gauge Connection Location Back and Side Differential Pressure Range Units In. H2O Differential Pressure Range Value 0 to 0.60 Gauge Accuracy +/-3.00% Body Material Glass Filled Nylon Gauge Primary Range Smallest Graduation 0.02 Diaphragm Material Buna-N Piston Material PTFE Seal Material Buna-N Gauge Operating Temp. Range 0 Degrees to 140 Degrees F Rated Total Pressure 35 psi Dial Material Stainless steel Scale Type Pressure Includes Instructions Manufacturers Warranty Length 5 yr.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616-5

Series 616 Transmitter features an exceptional ±0.25% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 122-AA-02-OO

Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers and for local flow indication and control. Five year limited warranty. Two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT end connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending).

Manufacturer: Cecomp / API Brand: Cecomp / API

Technical Specification Item Differential Pressure Gauge Differential Pressure Range +/-2 H20 Rated Total Pressure -20 Hg to 15 psi Connection Size 1/8 NPT Dial Size 3-3/4 Body Material Die Cast Aluminum Scale Type Pressure Accuracy +/-2% Dial Material Die Cast Aluminum Diaphragm Material Silicone Rubber Ambient Operating Range 20 Degrees to 140 Degrees F Includes Instructions, (2) 1/8 NPT Plugs, (2) 1/8 NPT to 3/16 I.D. Rubber Tubing Adapters, (3) Mounting Adapters with Screws Manufacturers Warranty Length 2 yr. This listing is for each.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 522-AA-02-AO

Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with particulates present. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications. Aluminum body material. 316 Stainless steel/ceramic/acetyl moving components. Buna-N seal material. 1/4-inches FNPT end connections, 2-1/2-inches uni-directional black on white round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending). Two 10-32 mounting holes, spaced 1.75-inches apart by 0.330-inches deep.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 122-AC-02-OO

Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers and for local flow indication and control. Five year limited warranty. Two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT end connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending).

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616D-10B

The Series 616D Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The 616D housing is specifically designed to mount on a 35 mm DIN rail in a panel. This mounting style allows for several units to be mounted closely together reducing required space. A wide range of models are available factory calibrated to specific ranges. The span and zero controls are for use when checking calibration. They are not intended for re-ranging to a significantly different span. Versatile circuit design enables operation in 2-wire current loops.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 668-4

Our low cost Series 668 Differential Pressure Transmitter is capable of measuring low pressures with a ±1% accuracy - ideally suited for proper building pressurization and air flow control. Transmitters can withstand up to 10 psig overpressure with no damage to the unit. Variable capacitance sensor design provides excellent sensitivity and long-term stability. Compact, lightweight design makes installation simple and easy. Units also feature reverse-polarity protection.