Pressure Gauges - Page 92

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument

Mid-West Instrument quick connect test cock adapter kit includes (3) 1/4-inches NPT by 1/4-inches flare, (3) 1/2-inches NPT by 1/4-inches FNPT, (3) 3/4-inches NPT by 1/4-inches FNPT quick connect fittings. Includes 3 spare o-rings per size packaged in a convenient plastic storage tube. Designed for hand tight connection of differential pressure test gauges to backflow prevention assemblies. Set includes all fittings required to test any size backflow device. No wrenches or Teflon tape required.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: P33EA94EGABNGP

This Parker P33EA94EGABNGP filter/pressure regulator combination or "piggy-back" is part of the P33 Standard series for high moisture removal in a pneumatic system. The filter removes oil, water, and particulate as small as 5 micron, and the regulator is a relieving type for venting excess pressure from the line. It has a polycarbonate bowl for resistance to oil, gas, and impact, a guard for protection, auto drain, and a pressure gauge. This element/regulator has an operating pressure range of 0 to 125 pounds per square inch gauge (psig) and a high-flow 1/2" National Pipe Thread (NPT) port for a flow rate of 191 standard cubic feet per minute (scfm). Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Winters Brand: Winters

PPC Standard Process Gauges are used where operator safety is a must. Applications are suited for process, chemical and petroleum industries especially with highly corrosive media. PPC Add-On Options Features: Solid phenolic front and polypropylene pressure relief back safety case Field liquid-fillable (bottom|Connection only) ±0.5% accuracy Stainless steel full rotary movement for longer life Micrometer pointer for ease in calibration Under and overload stops 316L stainless steel, brass or Monel wetted parts Restricted orifice standard on dual scale (optional on single scale) ASME B40.100 compliant RoHS compliant (SS and Monel internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Winters Brand: Winters

PPC Standard Process Gauges are used where operator safety is a must. Applications are suited for process, chemical and petroleum industries especially with highly corrosive media. PPC Add-On Options Features: Solid phenolic front and polypropylene pressure relief back safety case Field liquid-fillable (bottom|Connection only) ±0.5% accuracy Stainless steel full rotary movement for longer life Micrometer pointer for ease in calibration Under and overload stops 316L stainless steel, brass or Monel wetted parts Restricted orifice standard on dual scale (optional on single scale) ASME B40.100 compliant RoHS compliant (SS and Monel internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Dosatron Brand: Dosatron Model: 709018

Pressure reducing valves are devices which, when installed on water systems, decrease the pressure from incoming water lines. 3/4 in NPT female Inlet & outlet, working pressure: 15-87 PSI, max incoming pressure: 230 PSI. Max Temp: 140 Degree. chrome plated brass body with 2 in face.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3530819

The Fluke 810T noncontact tachometer attachment measures from 6 to 99,999rpm with accuracy to +/-0.05%, uses a laser beam, and has a 50cm cable. This noncontact tachometer is for with the Fluke 810 vibration tester, to measure the speed of motors, conveyor belts, and other moving and rotational systems. It measures from 6 to 99,999rpm with accuracy to + or - 0.05 percent. Its optical sensor is a laser beam that works at a distance of 1 to 100cm for user safety. Its integral 50cm cable connects the tachometer to the vibration tester for power and measurement data recording. It carries the CE mark to indicate compliance with applicable EU directives. This tachometer is suitable for measuring rotational speed in conjunction with vibration testing in mechanical or industrial engineering environments.Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Contact tachometers take measurements through direct contact with the moving surface, and can measure both rpm and surface speed. Typically, contact tachometers come with a range of attachments that can be used to measure speed on different kinds of rotary systems, which may include tips used for measuring shafts with a central hole or flat end surfaces, and rotary wheels for measuring conveyor belts. Noncontact tachometers take measurements from a distance using a beam of infrared light, and provide highly accurate measurements. Contact tachometers are an excellent choice for dirty and dusty environments; noncontact tachometers only calculate rpm but are considered safer because they do not require the operator to be in close contact with the moving surface. Contact/noncontact tachometers, also known as dual, or combination tachometers, can be used to take contact and noncontact measurements. Some tachometers can also take other types of measurements, such as count or frequency, while others can output data to a computer for analysis. Tachometers are used in applications such as automobile maintenance, mechanica...

Manufacturer: AMETEK Brand: Ametek

NEW AMETEK 1404 133252 SOLFRUNT 0-2000PSI 4-1/2 IN 1/4 IN NPT GAUGE D525524

Manufacturer: Indian Machine Tools Brand: AG Precision Model: NTD 400

These Nozzle testers are used to adjust the injector nozzle opening pressure, nozzle seat tightness and to carry out leakage tests, spray pattern atomization repetition tests and chatter characteristic tests. The nozzle tester consists of :- 1. Aluminum Cast Injection pump operated by a hand lever. 2. Semi Transparent fuel container with a 5 micron genuine Bosch filter. 3. Three way shut off valve. 4. Brass Bourdon tube Pressure gauge - 100 mm Dial, 3/8 " BSP thread Dual Scale Gauge:- Ranges: 0 - 400 Bar & 0 - 6000 PSI (See image 2 Above) 5. Packaged in export worthy thermocole and corrugated box. 6. Standard accessories:- - 1 handle with grip - 2 High pressure pipes 'A' and 'B' type with m.m. size nuts (12 X 1.5) and (14 X 1.5) for connections - 2 O-rings- 1 flat ring 7. Fitted with Original Bosch plunger and delivery valve. - We also provide the Operation Manual explaining the details and operation of the injector nozzle tester and the different tests it performs in the package. Excellent high quality testers that come with a warranty of 1 year. Note: These diesel injector nozzle testers are suitable for all kinds of diesel injectors except common rail (CRDI) diesel injectors. Important: Before shipping out, all our testers are thoroughly tested at our manufacturing facility for proper performance and functioning. They undergo pressure build up test, fuel leakage test, pressure gauge accuracy test etc. This is done to ensure that our quality standards are always met. They are tested with diesel fuel under the same conditions as they would be under normal use. We are the manufacturers and exporters of diesel fuel injection products for the last 35 years and have an expertise in this field, our products are highly reliable and dependable. We believe in offering excellent service to our customers.

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada