Pressure Gauges - Page 97

Manufacturer: Winters Brand: Winters Model: PFQ111

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: COLE-PARMER Brand: Ashcroft

Hand Jack Set works on all 21Ú2'' to 12'' diameter gauges. Remove or reassemble pointers without damaging your gauge. Simply slide hand jack over pointer to the movement pinion and screw down to lift pointer. Set includes a gauge-pointer remover and driver; driver features two holes to reassemble single and duplex gauges.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2320

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 4375242

The WIKA differential pressure gauge has stainless steel 316L wetted parts which resist corrosion against chloride, and a dial that is enclosed in a thermoplastic case for increased durability in low temperature environments. The gauge measures pressure up to 100 pounds per square inch differential (psid) and 400 inches of water (inH2O), and is accurate to + or - 2 percent of span over the entire range of the gauge. The female connection is mounted on the back of the gauge and has a 1/4" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in applications that require measuring high differential and static process pressures. Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization for Standardization (ISO) standards for ...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2000-00AV

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: Winters Instruments Brand: Winters Model: PLT35

Winters low pressure test kit with gauge, case, tube nipple, hose, and clamp. Application: Test kit for low pressure gas installations. Dial: 2.5". Case/Ring: Steel, painted black. Lens: Polycarbonate. Connection: Brass hose barb (1/4")(gear clamp included). Diaphragm Element: Phosphor bronze. Movement: Engineering plastic upper and lower plate with brass pinion and sector, with zero adjustment. Ambient Temperature: -40-150 F/C. Accuracy: +/- 3-2-3% ASME Grade B. Enclosure Rating: IP52. Pressure Range: 0-35" Water & 0-20 oz/in2. Tube Nipple: Rubber, 0.256" ID x 0.472" OD x 1.339". Protective Case Material: Plastic blow molded 5.75" x 7.56". Hose Tube: Rubber, 3' in length; 0.197" ID x 0.315" OD. Accessories: Pressure fitting with easy to install clamp.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 251009SW02LXLL100#

Ashcroft is pleased to reintroduce the 1009SW Duralife pressure gauge. This gauge has been upgraded with many new features outlined above while maintaining the tried and true performance and quality you have come to expect. Duralife 1009SW gauges provide significant features and benefits. New features include a ventable plug that can be sealed or vented depending on your environment and a patent pending through-dial recalibration that reduces recalibration time. The combination of features including the patented PowerFlex movement and optional PLUS! Performance dampening system in the 1009SW is the finest gauge technology for vibration, shock and pulsation applications. Available in pressure ranges from vacuum to 15,000 psi, including compound and metric ranges.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9833867

The WIKA process pressure gauge has stainless steel wetted parts, which are corrosion resistant against chloride, and a circular dial that is enclosed in a thermoplastic case for increased durability, particularly in low temperature environments. The gauge measures pressure from 15 pounds per square inch (psi) to 30,000 psi. Up to 20,000 psi, the gauge has an accuracy of + or - 0.5 percent of span, or American Society for Mechanical Engineering (ASME) B40.100 Grade 2A accuracy class. For pressure above 20,000 psi, the gauge has an accuracy of + or - 1.0 percent of span, or ASME B40.100 Grade 1A accuracy class. The male connection is available as either a lower mount or a lower back mount, and comes with a choice of a 1/4" or 1/2" National Pipe Thread (NPT) rate. This gauge is suitable for use in corrosive environments in process industries, such as chemical or petrochemical applications, mining applications, and power stations.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure ...

Manufacturer: Uniweld Products, Inc. Brand: Uniweld Model: QAL5SMEZ

Uniweld QAL5SMEZ 2-Valve Brass Manifold features a patented forged brass body and is manufactured with reseatable Teflon valve stem packing for durability and leak-proof reliability. It has extended valve stems for ample knuckle clearance and metal hand wheels. For convenience it has easy access front hose holders and the 2 1/2” steel case NPF gauges with 3 refrigerants (R-134A, R-22, R-404A) are easy to read and come with color coded protective gauge boots. It comes with a set of 5 ft. high-pressure Soft Magic Barrier Hoses with EZ-Turn anti-blowback fittings. Replacement gauges are available under Part# G29LD for RED and Part#G30LD for BLUE.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 1223-M1000-D

These inexpensive manometers measure positive, negative and differential pressures. Dwyer Flex-Tube U-Tube Manometers combine the inherent accuracy of the simple "U" Tube with the durability of tough, long-lasting plastic construction. Columns are of .375" O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility.