Pressure Gauges - Page 96

Manufacturer: Enerpac Brand: Enerpac Color: Silver

Enerpac Hydraulic Pressure Gauges are essential to safely monitor your hydraulic system and include a glycerin filled design to protect the gauge from noisy systems.  The GF-5P is compatible with most Enerpac Hydraulic Pumps, Enerpac Cylinders up to 5 tons and Enerpac Gauge Adaptors.

Manufacturer: Winters Brand: Winters Model: PLP353V

The Winters PLP series pressure gauge with stainless steel 316 wetted parts and a lower mount connection has a circular dial enclosed in a steel case, and measures pressure with a single or dual scale with an accuracy of + or - 1.6%. The stainless steel 316 wetted parts provide corrosion resistance. The stainless steel 304 case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 2.5" (63 mm) or 4" (100 mm) diameters. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The lens ring is steel. The gauge measures pressure with a single water vacuum scale or a dual scale of psi/kPa or water/oz. The gauge is accurate to + or - 1.6% of full scale value. The male connection is mounted on the bottom of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The welding is tungsten inert gas (TIG) for strength. The over-pressure limit is 30% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for vacuum pumps, air compressors, air filters, gas burners, vacuum ovens, suction regulators, and respirators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid ...

Manufacturer: PIC Gauges Brand: PIC Gauges Model: LP2-SS-254-60

These gauges have been designed and built with the contractor in mind. With a price that makes this the most attractive gauge for use on any project.

Manufacturer: SSI Brand: SSI

Digital Pressure Gauge, 5PSI MG-MD, Dial Size 3 In., Range 0-5, Connection Size 1/4-18 NPT W/22 MM HEX 316L Stainless Steel, Connection Location Bottom, Accuracy Full Scale +- 1.0 %, 304L Stainless Steel Socket Material, ABS Thermoplastic Case Material, Black Case Color, 4 Digit LCD Display, PSI, BAR and MPA Display Units, Powered By 12Vdc, Agency Compliance ROHS, Operating Temp. Range (F) -10 Degrees C TO +60 Degrees C/+14 Degrees F TO +140 Degrees F, MG-MD Series, Availabe Separately Calibra

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-71X-TRAP

FLUKE FLUKE-71X-TRAP LIQUID & DIRT TRAP, PRESSURE CALIBRATOR

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 07B46A18A2BD

This Parker 07B46A18A2BD compact 3-piece filter/pressure regulator/lubricator combination is part of the Prep-Air II series for pneumatic systems. The filter removes oil, water, and particulate as small as 40 micron; the regulator is a relieving type for venting excess pressure from the line; and the lubricator delivers oil over a wide range of air flows, with an adjustable delivery rate. The regulator and lubricator have polycarbonate bowls for resistance to oil, gas, and impact, with metal guards for protection. The regulator has an auto float drain, and the lubricator has a fill plug. This modular element/regulator/lubricator unit has an operating pressure range of 2 to 125 pounds per square inch gauge (psig) and a high-flow 3/4" National Pipe Thread (NPT) port for a flow rate of 90 standard cubic feet per minute (scfm). Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 840098

Automatically log up to 12,000 readings with date and time stamps and download them to your computer or manually record and review 99 readings on the meter’s display. Features a user friendly menu, backlit dot matrix display, auto power off and a tripod screw. This portable meter is ideal for measuring low differential pressure in clean rooms, test and balance, medical equipment, HVAC, pneumatic systems and computer peripherals. Reads gauge and differential pressure in 11 units of measure. Comes in a hard shell carrying case complete with 4 standard AAA batteries, pressure connection hose, instructions, RS232 to USB adaptor cable and software. N.I.S.T. traceable certificate of calibration available. Dimensions: 6¾" × 2¾" × 1½" (208 × 70 × 40 mm). Weight: 9 oz (255 g).

Manufacturer: Winters Brand: Winters Model: PETM213

Economical pressure gauge and valve body assembly used for pressure testing. Swivel hose adaptor on the water test gauge. Black steel case. 5 year warranty. Dual scale (psi/kpa). CRN registered. Applications: residential and commercial pressure testing of gas, air and water lines. Case: steel painted black. Lens: polycarbonate. Ring: steel, painted black. Bourdon tube: phosphor bronze. Movement: brass. Pointer: aluminum, black. Maximum pointer: available on water test gauge only. Welding: #50 tin solder. Working pressure maximum 75 percent of full scale value. Accuracy +/-3-2-3 percent ANSI/ASME Grade B. Enclosure Rating IP52. 0-160 psi/kPa. 2.5" Dial display. Connection: 3/4" Female swivel hose. Ambient/process temperature: -40/150 degree F. Water Test: 32/150 degree F.

Manufacturer: Miljoco Brand: Miljoco Model: LP2507L300

The Miljoco low pressure diaphragm gauge offers the pinnacle in both performance and accuracy for pressure and vacuum applications up to and including 10 PSI. Such uses include gas-draft indication, air flow & filtration, leak detection, etc. The LP2507L is constructed from a single beryllium-copper diaphragm affixed to a precision-machined brass plate. This advanced design, coupled with a high-precision, milled-teeth brass movement and nickel-silver pinion and bearing surface, provides the user with a low pressure instrument that is without equal.