Pressure & Vacuum Gauges - Page 100

Manufacturer: OMRON Brand: Omron

This item is used and in working condition.

Manufacturer: IFM Brand: Ifm

IFM PA3024 ELECTRONIC PRESSURE SENSOR 9.6-32VDC, 4-20MA, G 1/4 PORT SIZE

Manufacturer: Cecomp / API Brand: Cecomp / API

Technical Specification Digital Differential Pressure Gauge Type Digital Differential Pressure Gauge Item Digital Differential Pressure Gauge Gauge Nominal Dial Size 5 Basic Gauge Case Material Plastic Basic Gauge Wetted Parts Plastic Differential Gauge Connection Type Smooth Barb Differential Gauge Connection Size 13/64 Gauge Connection Location Back Differential Pressure Range Units In. H2O Differential Pressure Range Value -8 to 0 to 8 Digital Gauge Accuracy +/-1.00% Display LED Number of Display Digits 3 Case Material Glass Filled Nylon Digital Gauge Display Units in. H2O, cmH2O, mmH2O, kPa, Pa Powered By 24 to 240VAC/DC, 50/60 Hz Gauge Operating Temp. Range -10 Degrees to 140 Degrees F Includes Instructions, Panel Mount Gasket, Panel Mounting Screw Kit Manufacturers Warranty Length 2 yr. This listing is for each.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 142-AC-00-OO

Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Over range protection to full rated working pressure. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Five year limited warranty. Total separation of high and low pressures by a Convoluted Elastomer Diaphragm. Sensor magnetically coupled to the indicating pointer and optional switches. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Two times rated working pressure at ambient temperature. Aluminum body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings.

Manufacturer: LANG TOOLS Brand: Lang Tools

Allows Quicker And More Accurate Testing Of Exhaust Blockages In Catalytic Converters, Mufflers, Etc.; Hose Is 6&Apos;, Enough For Technician To Test From Drivers Seat.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF1000-675-500-ST

ACCUVAC TECHNOLOGY Zero Length Reducer.The manufacturer is ISO registered supplier. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: Z300DGC-5

Migration: no migration; zero leakage from high to low port. First marking on the scale: 15 percent of FSD. Sensing element: diaphragm. Wetted parts: diaphragm, body material, SS spring, ceramic magnet. Case material: engineered polymer. Dial size: 2.5 (square), 4.5" (round). Mounting: direct, front flange, 2" pipe and surface mounting. Maximum working pressure: 1500 psi / 100 Bar. Maximum process temperature: 200 degree F. Seals: Buna-N. Lens: Plexiglass (acrylic). Connection: 1/4" NPT(F) Std. Porting: In-line. Over range protection: Up to the maximum from high and low side. Protecting for gauge and switch: NEMA-4/IP65. Applications includes: Filter monitoring, pump performance, level measurement, Flow, flow direction, pressure monitoring, Flow rate, strainer monitoring, condition monitoring of heating/cooling system, Air filter and collector/bag filter monitoring, collector/bag filter monitoring, blower performance.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 120-SA-00-OO

Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers and for local flow indication and control. Five year limited warranty. Two times rated working pressure at ambient temperature. 316 Stainless steel body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending).

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 45-660-30-vac

Dial indicating process pressure gauge. Brass gauges are specifically designed for demanding applications in the chemical and petroleum processing industries. 4-1/2" Dial size bottom connected; single scale. +/-0.5 Percent full scale ASME grade 2A accuracy. Working pressure limitations: for dynamic pressure, the working pressure should be limited to 60 percent of the dial range. Static pressure: the working pressure, when no sharp fluctuations occur, should be limited to 90 percent of the dial range. -4 to 150 degree F Ambient temperature. -4 to 150 degree F Media temperature. Used is chemical petroleum and petrochemical refineries, utilities, food processing plants, paper mills, power generating stations, water treatment plants, wherever accuracy, safety, readability and reliability are crucial.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 06B34A18A4BCA

Compressed Air Filter, Removes Particulate, Metal Bowl with Sight Gauge, Manual Drain, 40 Micron, 80 scfm, 3/8" NPT, P MAX = 250 PSI (1700 kPa), T MAX = 175F (80C), Made in USA