Pressure & Vacuum Gauges - Page 130

Manufacturer: Dwyer Instruments Brand: Dwyer

From our inventory we are selling a Dwyer Photohelic Gauge. Specifications: Model #: 3220 More Information: Range: 0-20 lbs/sq-in Max Pressure: 35 PSIG Ports: 1/8" NPT

Manufacturer: CME Brand: CME Tools

Accuracy 0.0012" to 0.0039" MADE OF HARDENED TOOL STEEL AND GROUND FOR HIGH ACCURACY. PRECISION AND HIGH QUALITY NEEDLE BEARINGS FOR ACCURACY. PARTS ARE SEALED CONCENTRICITY: 0.0002"

Manufacturer: Winters Brand: Winters Model: PFQ1551

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: Winters Brand: Winters Model: PFQ780R1

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: Winters Brand: Winters Model: PCC1024C

The Winters PPC series pressure gauge with brass wetted parts has a liquid-fillable circular dial enclosed in a PBT case and a lower mount male connection with 1/4" NPT rate, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with an accuracy of + or - 1%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The chemical-resistant PBT (polybutylene terephthalate) case is color-coded for ease of process identification. The case comes in four different colors that are UV resistant and will not fade. The case is Ingress Protection certified IP65 for protection against solid objects including dust or liquids. The circular dial is 4" (100 mm) in diameter and liquid-fillable to protect against vibration and pulsation. The dial has an aluminum anodized black pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a dual scale of either psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection is mounted on the bottom of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The ring for the gauge is also PBT and the bourdon tube is phosphor bronze. The movement consists of OT59 brass gears and stainless steel 304 plates. The welding is a tin/copper alloy for pressures below 600psi (4,147kPa), and is a silver alloy for pressures 600psi (4.147kPa) and above. The over-pressure limit is 25% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for machinery, process lines, compressors, and hydraulics with heavy vibration and pulsation.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments,...

Manufacturer: Winters Brand: Winters Model: PFP671

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 41313

Forged body is solid brass for durability. Full porting maximizes capacity. Metal valve handles are full size for easy operation. Hose anchors are forged into back of body at 45°.

Manufacturer: CME Tools Brand: CME Tools

Spindle hardened and ground to 0.0004" T.I.R. Base ground parallel to spindle socket. Hardened and ground indexing plate with 36 ground holes for direct indexing in 10 degree incresements and graduations in 5 degree incresments. 10 vernier hole for 1 degree indexing. Center Height: 2-3/4" Weight: 15 lbs Tailstck weight 6 lbs

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 52295699

The Wika low pressure differential pressure gauge is designed to measure dry, clean non-aggressive gases and air. This instrument is ideally suited to measure differential pressure in filtration systems, pressure monitoring for HVAC, air handlers and ventilation systems and for pressure monitoring of clean rooms, gas scrubbers and dust collection systems. 4-1/2-inches diameter. Case: high-impact polycarbonate. Wetted parts: silicone rubber, polycarbonate. Window: polycarbonate. Dial: white aluminum. Pointer: black aluminum. Accuracy: + 3 percent of span. Mounting: 3 self-tapping mounting screws (standard). Applications: for dry, clean, non-aggressive gases, usually air, fan and blower monitoring, differential pressure monitoring in filters and overpressure monitoring in cleanrooms.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 52216837

The Wika low pressure differential pressure gauge is designed to measure dry, clean non-aggressive gases and air. This instrument is ideally suited to measure differential pressure in filtration systems, pressure monitoring for HVAC, air handlers and ventilation systems and for pressure monitoring of clean rooms, gas scrubbers and dust collection systems. 4-1/2-inches diameter. Case: high-impact polycarbonate. Wetted parts: silicone rubber, polycarbonate. Window: polycarbonate. Dial: white aluminum. Pointer: black aluminum. Accuracy: + 3 percent of span. Mounting: 3 self-tapping mounting screws (standard). Applications: for dry, clean, non-aggressive gases, usually air, fan and blower monitoring, differential pressure monitoring in filters and overpressure monitoring in cleanrooms.