Pressure & Vacuum Gauges - Page 140

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPG-109

Replace your outdated analog gauges with the new Series DPG-000 Digital Pressure Gauge. The Series DPG-000 possesses a ±0.5% full-scale accuracy sensor. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gauges. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button keypad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, Tare or auto zero and conversion of the pressure units.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 16A34B18A4BC

Technical Specification Item Filter/Regulator/Lubricator Pipe Size 1/2 NPT Max. Flow 90 cfm Filter Rating 5 micron Max. Pressure 250 psi Adjustment Range 0 to 125 psi Max. Temp. 175 Degrees F Bowl Size 4.4 oz. Bowl Material Die Cast Zinc Adjustment Knob Non Rising Number of Pieces 3 Drain Type Manual Gauge Port Size 1/4 NPT Overall Height 7.93 Overall Width 9.45 Includes Gauge Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616WL-22

The Series 616WL Differential Pressure Transmitter senses very low pressures of air and non-combustible, compatible gases and sends a standard 4-20 mA output signal. All models, including those featuring the 3 digit LCD digital read-out, are factory calibrated to specific ranges as listed in the chart below. Positive, negative and differential pressures can be measured within a full span accuracy of ±0.50%. This weatherproof unit is enclosed in a polycarbonate case, designed to meet (IP66/NEMA 4X). Internal digital push button zero and span allow for quick and simple field calibration.

Manufacturer: Ashcroft Brand: Ashcroft

Technical Specification Item Pressure Gauge Gauge Type Test Dial Size 2-1/2 Range 0 to 30 psi Connection Size 1/4 NPT Connection Location Lower Smallest Graduation 0.2 psi Graduations 5 psi Accuracy +/-1% Case Material Stainless Steel Case Color Silver Socket Material 316 Stainless Steel Tube Material 316 Stainless Steel Lens Material Polycarbonate Ring Material Stainless Steel Operating Temp. Range -40 Degrees to 150 Degrees F Characteristics PLUS Performance Series 1009 Includes Seal Manufacturers Warranty Length 5 yr. Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 4300-1KPA

The Dwyer Capsuhelic series 4000 differential pressure gauge with an aluminum case has a circular 4" (100 mm) dial, and four female 1/4" NPT rate connections, and measures pressure with single scale in inch water column (WC), mm WC, cm WC, psid, or kPa with a display accuracy of + or - 3 or 4%. The die-cast aluminum case with impregnated hard coating is for measuring air and compatible gases and oil-based liquids. The circular dial is 4" in diameter and measures pressure with a single scale in inch water column (WC), mm WC, cm WC, psid, or kPa. The pressure being measured is held within a capsule in the gauge, which permits the use of the gauge on system pressures of up to 500 psig, even with differentials less than 0.1 in WC. The gauge accuracy is + or - 3% of full scale at 70 degrees F (21.1 degrees C) with + or - 4% of full scale on some models. The pressure limits are -20" Hg. to 500 psig. The temperature limit is 20 to 200 degrees F (-6.67 to 93.3 degrees C). Four female connections with 1/4" NPT (National Pipe Thread) rate provide for vertical mounting of the gauge. The connections are paired with one high and low pressure pair of taps on top for air and gas and one high and low pressure pair on bottom for liquids. This gauge is suitable as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks, and other applications involving pressure, vacuum, or differential pressure. The gauge comes with two 1/4" NPT plugs for duplicate pressure taps, four flush mounting adapters with screws, and four surface mounting screws.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another referenc...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 4300-500PA

The Dwyer Capsuhelic series 4000 differential pressure gauge with an aluminum case has a circular 4" (100 mm) dial, and four female 1/4" NPT rate connections, and measures pressure with single scale in inch water column (WC), mm WC, cm WC, psid, or kPa with a display accuracy of + or - 3 or 4%. The die-cast aluminum case with impregnated hard coating is for measuring air and compatible gases and oil-based liquids. The circular dial is 4" in diameter and measures pressure with a single scale in inch water column (WC), mm WC, cm WC, psid, or kPa. The pressure being measured is held within a capsule in the gauge, which permits the use of the gauge on system pressures of up to 500 psig, even with differentials less than 0.1 in WC. The gauge accuracy is + or - 3% of full scale at 70 degrees F (21.1 degrees C) with + or - 4% of full scale on some models. The pressure limits are -20" Hg. to 500 psig. The temperature limit is 20 to 200 degrees F (-6.67 to 93.3 degrees C). Four female connections with 1/4" NPT (National Pipe Thread) rate provide for vertical mounting of the gauge. The connections are paired with one high and low pressure pair of taps on top for air and gas and one high and low pressure pair on bottom for liquids. This gauge is suitable as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks, and other applications involving pressure, vacuum, or differential pressure. The gauge comes with two 1/4" NPT plugs for duplicate pressure taps, four flush mounting adapters with screws, and four surface mounting screws.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another referenc...

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 15H1PA18A2NEC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 06A14A15A4BC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 07G41A13A2BD

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MP-010

Differential pressure switch/gage combines the time proven Minihelic II differential pressure gage with two SPDT switching set points. The Mini-Photohelic switch/gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. Switching status is visible by LED indicators located on the front and rear of the gage. Set points are adjusted with push buttons on back of unit. This extremely compact switch/gage is ideal for fume hoods, dust collection, pneumatic conveying and clean room applications.