Pressure & Vacuum Gauges - Page 160

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 522-AA-02-A(LE)

Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with particulates present. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications. Aluminum body material. Buna-N seal material. 1/4-inches FNPT end connections, 2-1/2-inches uni-directional black and white round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending). 316 Stainless steel, ceramic and acetyl moving components. Two 10-32 mounting holes, spaced 1.75-inches apart by 330-inches deep. One switch in standard enclosure with plug-in connector (DIN43650/IP65-PG11) NEMA 4X. SPST 60W 3.0 Amp 240 VAC/VDC (normally open).

Manufacturer: COLE-PARMER Brand: Ashcroft

A versatile and economic choice for a wide variety of pressure measurement applications. Gauges feature easy-to-use, three-button keypad programming. Cycle life of 108 makes these gauges a great value. Case material is made of PC/ABS. Gauges feature tare, min/max memory, and nine engineering plus one custom engineering units, as well as a bright backlight. Sensor is welded to the socket for added durability. Max pressure indication reduces chances of damage to the unit. Burst pressure rating is 300 to 800% of range. Gauges meet ASME B40.7 safety requirement. Other pressure connections, such as 1/8" NPT(M), are available. Call for assistance. What's Included: two AA batteries. Stainless steel sensor and nine engineering units make this gauge suitable for many applications ±0.5% full-scale accuracy IP67 rated case Easy-to-read, 5-digit display with 20-segment bar graph

Manufacturer: REOTEMP Instrument Brand: REOTEMP Model: SG40ATC15P20

Reotemp’s sanitary pressure gauges are specially designed to meet the demanding sanitary requirements of the brew industry. The quick connecting Tri-clamp design allows for fast removal and installation of instruments. Ideal for clean-in-place applications or equipment washdowns. The SG series is designed to meet 3-A sanitary standards. All welded 316 stainless steel tube, socket, seal, and diaphragm. Accuracy: standard seal: 1.5 percent for ranges 100 psi and above 2 percent for compound and below 100 psi ranges. Fractional seal: ranges 60 psi and above 2.5 percent up scale, up to 4 percent downscale. Made in the USA.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 121-AA-00-O(AA)

Mid-West Instrument piston type differential pressure gauge. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). One reed switch in NEMA 4X/IP65 plastic enclosure with terminal strip (1/2-inches FNPT conduit connection). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 15-95 percent).

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 121-AA-00-O(AA)

Mid-West Instrument piston type differential pressure gauge. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). One reed switch in NEMA 4X/IP65 plastic enclosure with terminal strip (1/2-inches FNPT conduit connection). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 15-95 percent).

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 121-AA-00-O(AA)

Mid-West Instrument piston type differential pressure gauge. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). One reed switch in NEMA 4X/IP65 plastic enclosure with terminal strip (1/2-inches FNPT conduit connection). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 15-95 percent).

Manufacturer: Fluke Corporation Brand: Fluke Model: FL62MAX+/T+PRO/1AC

The rugged Fluke 62 MAX+ IR thermometer teamed with the full featured T+PRO voltage continuity tester and the easy-to-use 1-AC-II non-contact voltage detector, has everything you need to solve problems quickly. Use the IR thermometer to test for overheating in electrical devices, next use the electrical test tools to learn more about the problem safely and conveniently.

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: CME Tools Brand: CME Tools

RADIUS AND ANGLE DRESSER An extremely accurate and versatile unit for use on all O.D. & I.D. surface grinding operations. At no time are the hands near the point of contact easy, fast, accurate radius setting.