Pressure & Vacuum Gauges - Page 180

Manufacturer: Fluke Brand: Fluke Model: A3001 FC - Fluke

A true-rms current clamp meter that wirelessly relays measurements to other Fluke ConnectTM enabled master units, listed below.  Fluke 3000 FC DMM Fluke Ti200/300/400 Infrared Camera PC via optional pc3000 FC Adapter  Fluke Connect Mobile app The iFlexTM Wireless Current Module allows you to measure around awkward sized conductors or get into tight spaces and makes wire access easier.    Fluke Connect See it. Save it. Share it. All the facts, right in the field. Fluke Connect with ShareLive TM video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android TM and iOS and works with over 20 different Fluke products-the largest suite of connected test tools in the world. And more is on the way. Go to the Fluke website to find out more. Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity. Supported smart phones: AndroidTM 4.3 & up iPhone® 4s & later

Manufacturer: Fluke Brand: Fluke Model: 4637005

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 16A34A13A4BC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 6004-4RCH-GF

A quality yet affordable 6"Dial Size all stainless steel gauge. This gauge is fillable, repairable and calibratable for versatility for use in broad commercial and industrial markets.application. We can make custom dials, supply in metric ranges and much more. Suitable for air, water, oil, gas or any other media not corrosive to stainless steel. Other connection locations, mounting styles and accessories available.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 451279SSL04L30#

The Ashcroft Duragauge 1279 type pressure gauge is the finest production gauge on the market for industrial use where precise indications are required. The product line offers a wide variety of case styles, Bourdon tubes and pressure ranges to meet your application needs. With the component combinations available in the Duragauge gauge line, over ten million variations are possible to serve the needs of all types of industries, including process, power, nuclear, aerospace and cryogenics.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 522-AA-02-A(LE)

Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with particulates present. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications. Aluminum body material. Buna-N seal material. 1/4-inches FNPT end connections, 2-1/2-inches uni-directional black and white round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending). 316 Stainless steel, ceramic and acetyl moving components. Two 10-32 mounting holes, spaced 1.75-inches apart by 330-inches deep. One switch in standard enclosure with plug-in connector (DIN43650/IP65-PG11) NEMA 4X. SPST 60W 3.0 Amp 240 VAC/VDC (normally open).

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MP-020

Differential pressure switch/gage combines the time proven Minihelic II differential pressure gage with two SPDT switching set points. The Mini-Photohelic switch/gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. Switching status is visible by LED indicators located on the front and rear of the gage. Set points are adjusted with push buttons on back of unit. This extremely compact switch/gage is ideal for fume hoods, dust collection, pneumatic conveying and clean room applications.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MP-5PSI

Differential pressure switch/gage combines the time proven Minihelic II differential pressure gage with two SPDT switching set points. The Mini-Photohelic switch/gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. Switching status is visible by LED indicators located on the front and rear of the gage. Set points are adjusted with push buttons on back of unit. This extremely compact switch/gage is ideal for fume hoods, dust collection, pneumatic conveying and clean room applications.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 522-AA-02-A(LE)

Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with particulates present. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications. Aluminum body material. Buna-N seal material. 1/4-inches FNPT end connections, 2-1/2-inches uni-directional black and white round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending). 316 Stainless steel, ceramic and acetyl moving components. Two 10-32 mounting holes, spaced 1.75-inches apart by 330-inches deep. One switch in standard enclosure with plug-in connector (DIN43650/IP65-PG11) NEMA 4X. SPST 60W 3.0 Amp 240 VAC/VDC (normally open).

Manufacturer: Fluke Corporation Brand: Fluke Model: 85RF II

The 85RF high frequency probe is designed to convert a DC voltmeter with a input impedance of 10M ohms into a high frequency (100kHz to 500 MHz) RF voltmeter. Conversion from AC to DC is accomplished on a one-to-one basis includes a range of 0.25 to 30V rms. The probe's DC output is calibrated to be equivalent to the rms value of a sine wave input. 0.25 to 30V rms voltage range. 30V RMS, 200V DC maximum input voltage. 1:1 AC to DC ratio. Ratio accuracy (at 25 MHz and loaded with 10 M ohm) Above 0.5V: +/- 0.5 dB. Below 0.5V: +/- 1.0 dB. Add +/- 0.2 dB in RF fields of 1 to 3 V/m. Frequency response (relative to 25 MHz): 100KHz to 100 MHz +/- 0.5 dB. 100 MHz to 200 MHz +/- 2.0 dB. 200 MHz to 500 MHz +/- 3.0 dB.