|
|
-
4.0 of 5.0 with 11 Reviews
SALE PRICE: $44.64 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PFQ735
Manufacturer: Winters
Brand: Winters
Model: PFQ735
|
The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $45.00 1% OFF
Manufacturer: CME
Brand: CME Tools
Manufacturer: CME
Brand: CME Tools
DESCRIPTION: Brand: "FAN" An excelent tool for small engine repair, water pumps, headlight service work, bench and dashboard work. Compact head design allows greater flexibility in difficult areas. Easy to grip reverse lever for simple dirctional changes. Hardened gears allow greater durability over other economically priced ratchets Accesory List: 4-1/2" Dr. impact socket(11,12,13,14mm) 1-Swivel hose connector 1-Male couple 1-3/8" Dr. screwdriver bit holder 1-3/8" TP 1/2" adaptor 1-1/2" Dr. 3" ext. bar 4-1/4" hex screwdriver bits 1-Blow molded case
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $46.06 1% OFF
Manufacturer: Winters
Brand: Winters
Model: PLP300
Manufacturer: Winters
Brand: Winters
Model: PLP300
|
The Winters PLP series pressure gauge with brass wetted parts has a circular dial enclosed in a steel case, and a male 1/4" NPT connection, and measures pressure with a single or dual scale with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The steel case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 2.5" (63 mm) or 4" (100 mm) diameters. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The lens ring is steel. The gauge measures pressure with a single water vacuum scale or a dual scale of psi/kPa or water/oz. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom or center back of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The movement for the 2.5" gauge is an engineering plastic upper and lower plate with brass pinion and sector. The movement for the 4" gauge is brass. The welding is brazed solder. The over-pressure limit is 30% of full scale value. The gauge operates in fluctuating pressure up to 60% of full scale value and status pressure up to 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for vacuum pumps, air compressors, air filters, gas burners, vacuum ovens, suction regulators, and respirators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. F...
-
4.0 of 5.0 with 27 Reviews
SALE PRICE: $47.95 22% OFF
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9748339
Manufacturer: WIKA Instrument Corporation
Brand: WIKA
Model: 9748339
|
The WIKA capsule low pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is 2 1/2" in diameter and enclosed in a steel case for increased durability in high-vibration environments. The gauge measures pressure up to 10 pounds per square inch (psi) or 60 inches of water (inH2O), and is accurate to + or - 1.5 percent of span over the entire range of the gauge. The male connection is available as a lower mount or center back mount, and comes with a choice of a 1/8" or 1/4" National Pipe Thread (NPT) rate. This gauge is suitable for use with non-corrosive fluid mediums, such as those found in low pressure pneumatic systems.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organization fo...
-
4.0 of 5.0 with 3 Reviews
SALE PRICE: $48.00
Manufacturer: CME
Brand: CME Tools
Manufacturer: CME
Brand: CME Tools
3"x7" TOOL MAKER'S PRECISION SCREWLESS VISE - NEW MADE OF TOOL STEEL, TOP QUALITY SQUARE AND PARALLEL TO ACCURACY: 0.0002" HARDENED AND PRECISION GROUND JAW WIDTH: 3" JAW OPENING: 3-3/4" LENGTH: 7" WT: 8 LBS
-
4.0 of 5.0 with 39 Reviews
SALE PRICE: $48.31 1% OFF
Manufacturer: Trerice
Brand: Trerice
Model: D83LFSS
Manufacturer: Trerice
Brand: Trerice
Model: D83LFSS
The Trerice D80 Series Industrial Gauge is designed for rugged performance requirements at an economical cost. This liquid filled gauge is furnished with a stainless steel case and crimped ring. Wetted parts are either bronze tube with brass socket or stainless steel.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $48.45 4% OFF
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5002
Manufacturer: Dwyer Instruments
Brand: Dwyer
Model: 2-5002
|
Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.
-
4.0 of 5.0 with 11 Reviews
SALE PRICE: $49.00 25% OFF
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF450-000-R
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF450-000-R
Cf4.5 knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.
-
4.0 of 5.0 with 11 Reviews
SALE PRICE: $49.00 25% OFF
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF462-250-R
Manufacturer: AccuVac Technology
Brand: AccuVac Technology
Model: CF462-250-R
Cf4.62 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a bored flange with bolt through holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.
-
4.0 of 5.0 with 28 Reviews
SALE PRICE: $49.00 1% OFF
Manufacturer: CME Tools
Brand: CME Tools
Manufacturer: CME Tools
Brand: CME Tools
MADE OF STAINLESS STEEL. DISPLAY UP TO 12"/300MM . * X-LARGE LCD SCEEN. * 3 BUTTONS: ON/OFF, MM/INCH, ZERO SET. * 0.0005" GRADUATION * JAW DEPTH: 2.5" * REMOTE DISPLAY OUTPUT. * OD & ID MEASURING. * QUESTIONS? E-MAIL: [email protected]
|
|