Pressure & Vacuum Gauges - Page 223

Manufacturer: ASC365 Brand: ASC365

ABL Peel off Force Test Stand is specially designed for NK, HF series push pull equipment, can be combined into the test machine with different uses. Specially used in PC board on foil circuit adhesion force or Tin foil, aluminum foil, tape etc. Hit the object surface firmness. In view of vertical dissert the test sample. To measure the actual strength. Feature 1. Manual operation, ladder type screw transmission, simple and stable operation. 2. This frame can be installed in table face, to make the test stand more stable.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 4002B

The Dwyer Capsuhelic series 4000 differential pressure gauge with a brass case has a circular 4" (100 mm) dial, and four female 1/4" NPT rate connections, and measures pressure with a single scale in inch water column (WC), psid, or kPa with a display accuracy of + or – 3 or 4%. The forged brass case is for measuring air and compatible gases and water-based liquids. The circular dial is 4" in diameter and measures pressure with a single scale in inch water column (WC), psid, or kPa. The pressure being measured is held within a capsule in the gauge, which permits the use of the gauge on system pressures of up to 500 psig, even with differentials less than 0.1 in WC. The gauge accuracy is + or - 3% of full scale at 70 degrees F (21.1 degrees C) with + or - 4% of full scale on some models. The pressure limits are -20" Hg. to 500 psig. The temperature limit is 20 to 200 degrees F (-6.67 to 93.3 degrees C). Four female connections with 1/4" NPT (National Pipe Thread) rate provide for vertical mounting of the gauge. The connections are paired with one high and low pressure pair of taps on top for air and gas and one high and low pressure pair on bottom for liquids. This gauge is suitable as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks, and other applications involving pressure, vacuum, or differential pressure. The gauge comes with two 1/4" NPT plugs for duplicate pressure taps, four flush mounting adapters with screws, and four surface mounting screws.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relati...

Manufacturer: DuraChoice Brand: DuraChoice Model: PAG204L-V00

Dial Size: 2" Dial Size (Crimped Casing) Accuracy: +/- 4/3/4% Scale: Dual Scale - PSI / Bar Movement: Copper Alloy Bourdon Tube: Copper Alloy Window: Glass Case: Steel case for protection in harsh environments Connection: Copper Alloy Lower Mount; 1/4" NPT (for 2" dial) Normal Ambient Temp.: -4F to +140F (-20C to +60C)

Manufacturer: Interstate Pneumatics Brand: Interstate Pneumatics

Interstate Pneumatics WRCO2-10 Pressure Gauge Cover.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF275-162-N

Cf275 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a non-rotatable bored flange with through bolt holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Trerice Brand: Trerice Model: D3749

Manufacturer: MANOTHERM Inc Brand: MANOTHERM

MANOTHERM Industrial Pressure Gauges Model P131 Case and bezel: Stainless steel 304 case, crimped bezel ring, corrosion resistant Dial Size: , 2.5" (63 mm) Connection size: 1/4" NPT-Male Ingress Protection: IP65 for protection against solid objects, including dust or liquids. Dial: White aluminum Pointer: Aluminum, anodized black Window: Polycarbonate for high impact resistance Measuring Range: Single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar Operating temperature : -4 to 150 degrees F (-20 to 65 degrees C). Application: suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments. MANOTHERM Inc. manufactures pressure gauges, thermometers, diaphragm seals, instrument manifolds and valves. The company founded in USA.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-331

A wide variety of fittings for use with most Dwyer products. Special line filters for the Magnehelic Gage and Capsuhelic Gage allow use with dusty environments. Particulate filters are used for Dwyer Flowmeters to keep the air clean. The Muffler Accessory can be easily field installed to any diaphragm valve with an exhaust. Pneumatic exhaust ports are on the diaphragm valves that have dual diaphragms and the units with the integral mounted solenoid. The muffler decreases the amount of noise when the air is exhausted from the valve. Valves with dual diaphragms and an integral solenoid have two exhaust ports and will require one A-237 and one A-238.

Manufacturer: G.S ONLINE STORE Brand: G.S ONLINE STORE

G.S CALIPER BOLEY 14CM BEST QUALITY

Manufacturer: G.S ONLINE STORE Brand: G.S ONLINE STORE

G.S CALIPER BEERENDONT BEST QUALITY