Pressure & Vacuum Gauges - Page 264

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2-5005

Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.

Manufacturer: Thuemling Instrument Group Brand: SPAN Model: LFS-210-15-G-CERT

Includes 5 point accuracy certificate of calibration. NIST Certified gauge for QA, quality assurance, ISO, ANSI or ASME applications. Span gauges are designed for rugged service applications. Liquid fill fluid dampens the gauge pointer movement for improved readings and longer life, making these gauges ideal for high shock and vibration applications. Its Zytel nylon case and ring offer good appearance and excellent resistance to chemical, weather, and corrosion attack. Heavy Duty, Hydraulic, Outdoor, Vibration Service.

Manufacturer: Thuemling Instrument Group Brand: SPAN Model: LFS-210-30Hg/300PSI-G-CERT

Includes 5 point accuracy certificate of calibration. NIST Certified gauge for QA, quality assurance, ISO, ANSI or ASME applications. Span gauges are designed for rugged service applications. Liquid fill fluid dampens the gauge pointer movement for improved readings and longer life, making these gauges ideal for high shock and vibration applications. Its Zytel nylon case and ring offer good appearance and excellent resistance to chemical, weather, and corrosion attack. Heavy Duty, Hydraulic, Outdoor, Vibration Service.

Manufacturer: Winters Brand: Winters Model: PFP852

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Parker Brand: Parker Model: 05E12A13AB

This Parker 05E economy series compressed air filter/regulator is for water and particulate removal, and air pressure control. This filter is a single-unit, integral, "piggyback" filter/regulator for space-saving installations and has a relieving-style regulator to exhaust excess pressure for increased performance and safe operation. It has a removable, non-rising knob for tamper resistance and male National Pipe Taper (NPT) threads for connecting to female threaded pipes. Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems. The company, founded in 1918 and headquartered in Cleveland, OH, provides fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace technologies.

Manufacturer: Farecla, Inc. Brand: Farecla, Inc.

Designed for gel coats, painted surfaces and solid surfaces. Quickly and permanently removes 800 grit dry sanding marks. Water-based formula contains no fillers and very low VOC which means no haze-back, easy clean up, extended buff pad life, safer to use and better for the environment. Contains no silicone paint shop friendly. Concentrated Savings loaded with 50% more premium abrasive material to work faster and use 3 to 4 times less material than the closest competing product. Suitable for gel coats, painted surfaces and solid surfaces Restoring surface gloss and color to weathered surfaces on boats, planes, trucks, buses, trains, wind turbines, solid surfaces, etc.

Manufacturer: CME Brand: CME Tools

8 pairs 1/2" thickness precision steel parallel set. All 6" long. Made of high quality hardened steel. Precision ground. Within 0.0002" in parallelism. Paired 0.0002" in height Inluding 1 pair of the following heights: 1/2 x 7/8--------5/16 hole 1/2 x 1----------5/16 hole 1/2 x 1-1/8-----3/8 hole 1/2 x 1-1/4-----3/8 hole 1/2 x 1-3/8-----7/16 hole 1/2 x 1-1/2-----7/17 hole 1/2 x 1-5/8-----1/2 hole 1/2 x 1-3/4-----1/2 hole Fitted in deluxe plastic box.

Manufacturer: Winters Brand: Winters Instruments Model: PLP305

The Winters PLP series pressure gauge with brass wetted parts has a circular dial enclosed in a steel case, and a male 1/4" NPT connection, and measures pressure with a single or dual scale with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The steel case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 2.5" (63 mm) or 4" (100 mm) diameters. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The lens ring is steel. The gauge measures pressure with a single water vacuum scale or a dual scale of psi/kPa or water/oz. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom or center back of the gauge and has a 1/4" NPT (National Pipe Thread) rate. The movement for the 2.5" gauge is an engineering plastic upper and lower plate with brass pinion and sector. The movement for the 4" gauge is brass. The welding is brazed solder. The over-pressure limit is 30% of full scale value. The gauge operates in fluctuating pressure up to 60% of full scale value and status pressure up to 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for vacuum pumps, air compressors, air filters, gas burners, vacuum ovens, suction regulators, and respirators.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. F...

Manufacturer: Winters Brand: Winters Model: PFQ703

The Winters PFQ series pressure gauge with brass wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The OT58 brass wetted parts are for measuring non-corrosive liquid and gas pressure. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi scale or a dual scale of psi/kPa, psi/bar, Hg. vacuum/kPa, or Hg. vacuum/bar. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection comes with a 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is OT59 brass, and the welding is silver alloy. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges ca...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2080

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.