Pressure & Vacuum Gauges - Page 277

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 142-SC-00-OO

Mid-West Instrument diaphragm type differential pressure gauge. Weather resistant construction standard. Over range protection to full rated working pressure. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Five year limited warranty. Total separation of high and low pressures by a Convoluted Elastomer Diaphragm. Sensor magnetically coupled to the indicating pointer and optional switches. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Two times rated working pressure at ambient temperature. 316 Stainless steel body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 312L-404CC

The PIC Gauge 312L-404CC pressure gauge has stainless steel 316 wetted parts, which provide corrosion resistance, and a glycerine-filled, 4" circular dial enclosed in a corrosion-resistant stainless steel case. The glycerine-filled dial dampens vibration and reduces wear, increasing accuracy and life span compared to dry pressure gauges. Glycerine-filled dials are designed for use in environments exposed to mild changes in temperature. The laminated safety glass lens is resistant to corrosion and scratching that can cause reading errors. The black aluminum pointer is adjustable, and the stainless steel bezel is removable. The gauge has a 30/0/30 Vac psi pressure range with 10 psi figure intervals and 1 psi graduation intervals, and is accurate to + or - 0.5 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) Grade 2A accuracy class. The male connection mounted on the lower back portion of the gauge is welded to the case and has a 1/4" National Pipe Thread (NPT) rate. The pressure gauge is suitable for measuring pressure in corrosive environments. SpecificaitonsWetted parts materialStainless steel 316Case materialStainless steel, welded case-to-stem connectionUnits of measurepsiPressure range30/0/30 Vac psiAccuracy+ or - 0.5% of span, ASME B40.1 Grade 2ADial size4"Dial lens materialLaminated safety glassDial fill materialGlycerineConnection1/4" NPTMountLower backOperating temperature range30 to 160 degrees F (glycerin filled)PointerAdjustable, black aluminumBezelRemovable, stainless steelPressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to a reference measurement. Gauge pressure measures...

Manufacturer: SSI Technologies Brand: SSI Technologies Model: MG-30-A-9V-R Color: Black/Blue

Digital Pressure Gauge, 3" dial, Automatic Shutdown after 5 min, SS sensor. The Media Gauge is a multi-functional Digital gauge. Contains a media isolated piezo resistive pressure sensing element, signal conditioning, a 304 sensing port and LCD back lit display. A battery saver is incorporated to automatically shut the LCD display off after 5 minutes prolonging the batteries life. Chemical Capabilities: Any Gas or Liquid compatible with 304L and 316L stainless steel. For example: Motor Oils, Diesel, Hydraulics, Water, Nitrogen, Air.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 16G2KB13ANBC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 122-AC-02-O(MA)

Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT end connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending). One reed switch (clamp-on). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 10-100 percent).

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 122-AC-02-O(MA)

Mid-West Instrument piston type differential pressure gauge. Simple, rugged, compact design. Over-range protection to maximum pressure. Weather resistant construction standard. Shatter resistant acrylic lens. A low cost differential pressure gauge for use in measuring the pressure drop across filters, strainers, separators, valves, pumps, chillers, etc., and for local flow indication and control. Proof pressure: two times rated working pressure at ambient temperature. Aluminum body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT end connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-5 percent full scale (ascending). One reed switch (clamp-on). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 10-100 percent).

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 220-SC-02-O(AAA)

Mid-West Instrument piston type differential pressure gauge. Simple rugged compact design. Over range protection to maximum pressure. Weather resistant gauge construction standard. Five year limited warranty. Low cost piston type differential pressure gauge for use in measuring or controlling the pressure drop cross filters, strainers, separators, valves and pumps. 316 Stainless steel body material. Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT end connections, 4-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Ceramic moving components. One control switch in NEMA-4X enclosure (1) (6) (8). No input power for reed outputs A, E, F, G and H. SPDT, 3W, 0.25 Amp, 125 VAC/VDC (switch adjustable 15-90 percent of full scale ascending). Shatter resistant acrylic lens.

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 142-AA-00-O(EA)

Mid-West Instrument diaphragm type differential pressure gauge. Over range protection to full rated working pressure. Weather resistant construction standard. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Proof pressure: two times rated working pressure at ambient temperature. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. Aluminum body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings. One reed switch in NEMA 4X/IP66 aluminum enclosure, division 2 hazardous locations (1)(2). SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 15-95 percent).

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 16G3EB18A1BC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.