Pressure & Vacuum Gauges - Page 318

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616D-20B

The Series 616D Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The 616D housing is specifically designed to mount on a 35 mm DIN rail in a panel. This mounting style allows for several units to be mounted closely together reducing required space. A wide range of models are available factory calibrated to specific ranges. The span and zero controls are for use when checking calibration. They are not intended for re-ranging to a significantly different span. Versatile circuit design enables operation in 2-wire current loops.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-9-600-R

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 616WL-14

The Series 616WL Differential Pressure Transmitter senses very low pressures of air and non-combustible, compatible gases and sends a standard 4-20 mA output signal. All models, including those featuring the 3 digit LCD digital read-out, are factory calibrated to specific ranges as listed in the chart below. Positive, negative and differential pressures can be measured within a full span accuracy of ±0.50%. This weatherproof unit is enclosed in a polycarbonate case, designed to meet (IP66/NEMA 4X). Internal digital push button zero and span allow for quick and simple field calibration.

Manufacturer: CME Brand: CME Tools

Moveable,portable tool cabinets on dolly,heavy duty #ZHX-206-6 -new 3 compatible tool cabinet and boxes on dolly

Manufacturer: CME Brand: CME Tools

* 5pcs 1/2 x 1-1/4 x 3 variable helix 35/38 degree carbide end mills 4flt, s/e Tialn coated, center-cutting ----$179.95--- free shipping ----Advanced Flute Geormetry to Cut Stainless and other Tough Alloy steel at High Metal Removal Speed.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 313L-402CC

The PIC Gauge 313L-402CC pressure gauge has stainless steel 316 wetted parts, which provide corrosion resistance, and a dry, fillable, 4" circular dial enclosed in a corrosion-resistant stainless steel case. The dry case can be filled with fluid (not included). Fluid dampens vibration and reduces wear, increasing accuracy and life span compared to dry pressure gauges. The laminated safety glass lens is resistant to corrosion and scratching that can cause reading errors. The black aluminum pointer is adjustable, and the stainless steel bezel is removable. This gauge features an accuracy of + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) Grade 2A accuracy class. The male connection mounted on the lower back portion of the gauge is welded to the case and has a ring clamp and a 1/2" National Pipe Thread (NPT) rate. The pressure gauge is suitable for measuring pressure in corrosive environments.

Manufacturer: Mid-West Instrument Brand: Mid-West Instrument Model: 140-SA-00-O(AA)

Mid-West Instrument diaphragm type differential pressure gauge. Over range protection to full rated working pressure. Weather resistant construction standard. Shatter resistant acrylic lens. Ideally suited for use on dissimilar fluids and wet gas or fluids with a high concentration of solids. Proof pressure: two times rated working pressure at ambient temperature. Common applications: filter/strainer monitoring, compressed air, hydraulic, refrigerant, pump performance testing, heat exchanger pressure drop monitoring, water treatment applications, tank level monitoring horizontal or vertical, flow monitoring and balancing. 316 Stainless steel body material. 316 Stainless steel internal metal part. Buna-N seal material. 1/4-inches FNPT back connections, 2-1/2-inches uni-directional round dial, weather resistant engineered plastic case, accuracy +/-2 percent full scale (ascending). Teflon guide bushings. One reed switch in NEMA 4X/IP66 enclosure. SPDT 3W, 0.25 Amp, 125 VAC/VDC (standard) (switch adjustable range of 15-90 percent).

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 06A14A13A4BC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Ames True Temper Brand: Ames True Temper

Technical Specification Item Pressure Gauge Gauge Type With Seal Dial Size 2-1/2 Range 0 to 400 psi Connection Size 1/2 FNPT Connection Location Bottom Smallest Graduation 5 psi Graduations 50 psi Accuracy +/-1.60% Case Material 304 Stainless Steel Case Color Silver Socket Material 316 Stainless Steel Tube Material 316 Stainless Steel Filled With Glycerin Lens Material Plastic Ring Material Polished Stainless Steel Operating Temp. Range -30 Degrees to 200 Degrees F For Use With Thick or Corrosive Medias Compatible with 316 Stainless Steel Includes Mini Diaphragm Seal Manufacturers Warranty Length 1 yr. This listing is for each.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV200

' Infrared Window, Crystal Insert Size 50mm dia., Viewing Aperture Size 45mm dia., Window Thickness 2mm, NEMA Rating 4, 12, IP Rating 67, Gasket Maximum Temperature 232 Degrees C (450 Degrees F), Body Maximum Temperature 232 Degrees C (450 Degrees F), Optic Maximum Temperature 232 Degrees C (450 Degrees F), Voltage Range Any, Components CV200, ClirVu(R) Infrared Window, Body Material Zinc/Aluminum Alloy, Includes Hand Turn Door, Manufacturers Warranty Length Limited Lifetime '